- 询价
- VP-scientific
- VP57
- 美国
- 2025年07月12日
13 年金牌会员
企业认证
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 询价记录
- 技术资料
- 库存：
大量
- 英文名：
VP-scientific
- 供应商：
上海钰博生物科技有限公司
- 保存条件：
详见官方网站
| CUSTOM ALUMINUM HEAT TRANSFER BASE FOR ABGENE (#AB093) 96 DEEP WELL MICROPLATE, SBS FOOTPRINT, SCULPTED TO CLOSELY FOLLOW THE OUTSIDE CONTOURS OF | VP-scientific | |
| VP 741I6C | Aluminum Heat Transfer Plate For Abgene (#AB 0661) Or Other Deep Well Microplate, SBS Footprint, Sculpted To Closely Follow The Outside Contours Of The Plate Bottom, For Use With VP 741, VP 741A-R And VP 743 Deep Well | VP-scientific |
| VP 743AW-R-MB-1 | Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 120 Volt, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer. | VP-scientific |
| VP 743AW-R-MB-1CE | Aluminum Heating Block for three deep well microplates or racks of glass vials, temperature control 25 to 200° C with RTD, Watlow Controller, 230 Volt, CE compliant, Mica insulation on bottom for VP 710E-2HM Magnetic Tumble Stirrer. | VP-scientific |
| VP 744 | Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom. | VP-scientific |
| VP 744A | Heater/Chiller Recirculating Fluid Block with SBS locating feature on the bottom and SBS microplate accepting pocket on the faceplate. | VP-scientific |
| VP 744B-MB | Heater/Chiller Recirculating Fluid Block for deep well or standard microplates. Special design to minimize eddy currents when used on a Tumble Stirrer. | VP-scientific |
| VP 745 | HEATER/CHILLER RECIRCULATING FLUID BLOCK FOR VP 750 BUBBLE PADDLE STIRRER | VP-scientific |
| VP 749-9-32-105 | - | VP-scientific |
| VP 750 | POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES | VP-scientific |
| VP 750-13-AL | ANODIZED ALUMINUM BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml | VP-scientific |
| VP 750-13-PP | Bubble Paddle Reservoir, 12-channel format, polypropylene, stirred by Tumble Stirrer, includes 1 stainless steel bubble paddle with 13 bubbles and 2 PTFE hubs, mixes 70 ml. | VP-scientific |
| VP 750-13-PTFE | PTFE BUBBLE PADDLE RESERVOIR, 12-CHANNEL FORMAT; INCLUDES 1 STAINLESS STEEL BUBBLE PADDLE WITH 13 BUBBLES AND 2 PTFE HUBS; MIXES 70ml | VP-scientific |
| VP 750-ECON-6 | ECONOMY BUBBLE PADDLE RESERVOIR MADE WITH A DISPOSABLE NALGENE RESERVOIR (VP 792D) AND FOUR 11 BUBBLE PADDLES (VP 757FE-1) IN A POLYCARBONATE FRAME CONTAINING PTFE BEARINGS. | VP-scientific |
| VP 750-ECON-6A | Economy Bubble Paddle Reservoir made with Nalgene disposable polypropylene. SBS footprint with 6 bubble paddles (7 bubbles/paddle) and polycarbonate frame with PTFE bearings for the bubble paddles. | VP-scientific |
| VP 750ACFeP | BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB | VP-scientific |
| VP 750AFeP | BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS | VP-scientific |
| VP 750AL | Aluminum Bubble Paddle Reservoir For 96 Pipettes - Includes 4 VP 757AFe Bubble Paddles. Reservoir Has SBS Dimensions And A Peltier Adaptor Feature On The Bottom | VP-scientific |
| VP 750AL-2 | Hydrophilic-Coated Aluminum Reservoir. 127.7mm long, 85.5mm wide, 50mm tall. Flat Bottom, designed to hold VP 750P-ECON-5F Polycarbonate Frame with four VP 757AFe Bubble Paddles | VP-scientific |
| VP 750D | DELRIN MAGNETIC BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES | VP-scientific |
| VP 750D-SBS | DELRIN BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM | VP-scientific |
| VP 750PTFE | PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES | VP-scientific |
| VP 750PTFE-SBS | PTFE BUBBLE PADDLE RESERVOIR - INCLUDING 4 BUBBLE PADDLES WITH 13 BUBBLES FOR 96 PIPETTES WITH SBS FEATURE ON THE BOTTOM | VP-scientific |
| VP 751AFe | BUBBLE PADDLE, 7 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL WITH 2 PTFE HUBS | VP-scientific |
| VP 754CFe | BUBBLE PADDLE, 17 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL, MAGNETIC CLUTCH | VP-scientific |
| VP 754CMP | MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 16 PIPETTES INCLUDING STAINLESS STEEL PADDLE WITH 17 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 13ml | VP-scientific |
| VP 754V-50 | Vertical Bubble Paddle stirrer to stir magnetic beads and keep them in suspension in a 50ml tube. | VP-scientific |
| VP 755ACAL | BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB | VP-scientific |
| VP 755ACFe | Bubble Paddle, 25 Bubbles On 4.5mm Centers, Constructed From Passivated Stainless Steel, Magnetic Clutch And PTFE Hub | VP-scientific |
| VP 755ACFeP | BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB | VP-scientific |
| VP 755AFe-1 | Economy Bubble Paddle for disposable SBS polypropylene reservoir (VP 578DC), 8 bubble paddles with PTFE bearings for the bubble paddles. | VP-scientific |
| VP 755AFeP | BUBBLE PADDLE, 25 BUBBLES ON 4.5mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS | VP-scientific |
| VP 755AL | ANODIZED ALUMINUM 8 MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 16 ROWS OF 24 PIPETTES, WITH DUCTED BOTTOMS TO CONFORM TO 8, PADDLES WITH 25 BUBBLE PADDLES EACH | VP-scientific |
| VP 755C-384C | Delrin Reservoir With 8 Magnetic Clutch Bubble Paddles For 16 Rows Of 24 Pipettes, With Ducted Bottoms To Conform To 8 Paddles With 25 Bubbles Each, Inlet And Outlets With Screw Adjustable Overflow Weir And Aluminum Base For Strength And Heat Exchange | VP-scientific |
| VP 755D | DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES | VP-scientific |
| VP 755D-1 | DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 8 BUBBLE PADDLES WITH 25 BUBBLES FOR 384 PIPETTES, SBS FEATURE MACHINED INTO BASE | VP-scientific |
| VP 756 | POLYPROPYLENE BUBBLE PADDLE RESERVOIR INCLUDING 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 2 PTFE HUBS, MIXES 25ml | VP-scientific |
| VP 756A | POLYPROPYLENE BUBBLE PADDLE RESERVOIR; INCLUDES 1 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND 2 PTFE HUBS; MIXES 50ml | VP-scientific |
| VP 756A-2 | DELRIN BUBBLE PADDLE RESERVOIR INCLUDING 2 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES WITH 4 PTFE HUBS, MIXES 75 ml | VP-scientific |
| VP 756A-LID | Polypropylene lid for the VP 756A, slotted to allow for pipette tips to access reservoir. | VP-scientific |
| VP 756ACAL | BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM ANODIZED ALUMINUM, MAGNETIC CLUTCH AND PTFE HUB | VP-scientific |
| VP 756ACFeP | BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE, MAGNETIC CLUTCH AND PTFE HUB | VP-scientific |
| VP 756AFeP | BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS; CONSTRUCTED FROM PASSIVATED STAINLESS STEEL AND COATED WITH PARYLENE WITH 2 PTFE HUBS | VP-scientific |
| VP 756C-1 | IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml | VP-scientific |
| VP 756C-1P | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml | VP-scientific |
| VP 756C-1P100 | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 100ml | VP-scientific |
| VP 756C-1P100T | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL BUBBLE PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 100ml, | VP-scientific |
| VP 756C-1PD | IMPROVED POLYPROPYLENE RESERVOIR WITH SPA BEAD DUCTED BOTTOM. DRAIN TUBE INSERTED IN BOTTOM DUCTING CONNECTED TO OUTLET, INCLUDES PASSIVATED STAINLESS STEEL PADDLE COATED WITH PARYLENE. PADDLE HAS 9 BUBBLES AND MAGNETIC CLUTCH, MIXES 50ml | VP-scientific |
| VP 756C-1PT | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml | VP-scientific |
| VP 756C-1PTFE100 | Improved PTFE Reservoir With Ducted Bottom For 8 Pipettes Including Parylene Coated Stainless Steel Bubble Paddle With 9 Bubbles And Magnetic Clutch, Mixes 100ml | VP-scientific |
| VP 756C-1T | IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml | VP-scientific |
| VP 756C-96BPTFE | PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, WITH INLET AND OUTLET NIPPLES AND LIQUID LEVEL CONTROL SYSTEM. | VP-scientific |
| VP 756C-96BPTFE-FB | PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 4 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES, OVER FLOW WEIR AND INLET, FLAT BOTTOM (NO CHANNELS) WITH ROUNDED EDGES | VP-scientific |
| VP 756CM-P | MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 15ml | VP-scientific |
| VP 756CM-P0 | MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH NO NIPPLES, MIXES 15ml | VP-scientific |
| VP 756CM-P1 | MINIATURE POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH A SINGLE INLET NIPPLE, MIXES 15ml | VP-scientific |
| VP 756CP-96B | DELRIN MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 6 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES | VP-scientific |
| VP 756CP-96BPTFE | PTFE MAGNETIC CLUTCH BUBBLE PADDLE RESERVOIR FOR 96 PIPETTOR, INCLUDES 6 PARYLENE COATED STAINLESS STEEL BUBBLE PADDLES | VP-scientific |
| VP 756CS_PTFE | PTFE BUBBLE PADDLE RESERVOIR WITH 8 PIPETTE DEPRESSIONS AT 38.1mm INTERVALS, DEPTH = 30 mm, WIDTH = 10 mm, OUTSIDE DIMENSIONS = HEIGHT = 40 mm, WIDTH = 31mm, LENGTH = 318 mm | VP-scientific |
| VP 756CT | RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING PARYLENE COATED STAINLESS STEEL PADDLE WITH 9 BUBBLES AND MAGNETIC CLUTCH, WITH INLET AND OUTLET NIPPLES, MIXES 50 ml | VP-scientific |
| VP 757AFe | BUBBLE PADDLE, 11 BUBBLES ON 9 mm CENTERS, CONSTRUCTED FROM PASSIVATED STAINLESS STEEL WITH 2 PTFE HUBS | VP-scientific |
| VP 757AL | HYDROPHILIC COATED ALUMINUM BUBBLE PADDLE RESERVOIR - INCLUDING 6 BUBBLE PADDLES WITH 7 BUBBLES FOR 96 PIPETTES WITH SBS DIMENSIONS | VP-scientific |
| VP 758-3 | IMPROVED DELRIN RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml | VP-scientific |
| VP 758-3MAX | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 12 PIPETTES INCLUDING ALUMINUM PADDLE WITH 13 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 400ml | VP-scientific |
| VP 758-3P | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml | VP-scientific |
| VP 758-3PTFE | IMPROVED PTFE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED REPLACEABLE DRIVE SHAFT, MIXES 50ml | VP-scientific |
| VP 758-3S | REPLACEMENT SEAL BEARING FOR VP 758-3, VP 758-3P OR VP 758-3PTFE, INCLUDES SHAFT | VP-scientific |
| VP 758-4PTFE | IMPROVED PTFE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED DRIVE SHAFT, MIXES 125 ml | VP-scientific |
| VP 758-5PP | Bubble Paddle Reservoir, ducted bottom for 8 or 12 pipet tips, polypropylene, includes paddle with 13 bubbles and double sealed replaceable drive shaft, mixes 450ml | VP-scientific |
| VP 758AL | NEW DESIGN ALUMINUM BUBBLE PADDLE, 9 BUBBLES ON 9mm CENTERS, OR USE WITH SEALED BEARING BUBBLE PADDLE RESERVOIR, FOR USE WITH VP 758-3) | VP-scientific |
| VP 758M | IMPROVED POLYPROPYLENE RESERVOIR WITH DUCTED BOTTOM FOR 8 PIPETTES INCLUDING ALUMINUM PADDLE WITH 9 BUBBLES AND DOUBLE SEALED DRIVE SHAFT, WITH INLET AND OUTLET NIPPLES, MIXES 15 ml | VP-scientific |
| VP 759 | DELRIN BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. | VP-scientific |
| VP 759AL | NEW DESIGN ALUMINUM BUBBLE PADDLE, 13 BUBBLES ON 9mm CENTERS, FOR USE ON VP 759, VP 759P AND VP 759PTFE | VP-scientific |
| VP 759P | POLYPROPYLENE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. | VP-scientific |
| VP 759PTFE | PTFE BUBBLE PADDLE RESERVOIR WITH DUCTED BOTTOM FOR 96 PIPETTES INCLUDING 4 ALUMINUM BUBBLE PADDLES COATED WITH PARYLENE. | VP-scientific |
| VP 760 | MICROPLATES WITH TUMBLE STIRRERS - INQUIRE FOR SPECIFIC PRICING | VP-scientific |
| VP 760A | MEGA BUBBLE PADDLE STIRRER WITH 11 LITER RESERVOIR | VP-scientific |
| VP 760B | MINI BUBBLE PADDLE STIRRER WITH 0.5 LITER RESERVOIR | VP-scientific |
| VP 761-1 | VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1 | VP-scientific |
| VP 761-1CE | CE MARK VARIABLE POWER SUPPLY, MOTOR AND MAGNETIC CLUTCH FOR VP 756C-1, OPERATES OFF 230 VOLTS | VP-scientific |
| VP 761M | VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH FOR VP 756CMP OPERATES OFF 120 VOLTS | VP-scientific |
| VP 761MCE | CE COMPLIANT VARIABLE POWER SUPPLY & MINIATURE MOTOR AND MAGNETIC CLUTCH FOR VP 756CMP OPERATES OFF 230 VOLTS | VP-scientific |
| VP 761S | VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC CLUTCH FOR VP 756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 120 VOLTS | VP-scientific |
| VP 761SCE | CE COMPLIANT 24 VOLT VARIABLE POWER SUPPLY & 22 MM MOTOR AND MAGNETIC CLUTCH FOR VP 756CS-PTFE, MOTOR HOUSING FROM PTFE, REQUIRES 230 VOLTS | VP-scientific |
| VP 762 | DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP 756C BUBBLE PADDLE RESERVOIR, OPERATES OFF 120 VOLTS | VP-scientific |
| VP 762CE | CE MARK DC SERVO MOTOR, POWER SUPPLY HOUSING AND MAGNETIC CLUTCH FOR VP 756C BUBBLE PADDLE RESERVOIR, OPERATES OFF 230 VOLTS | VP-scientific |
| VP 763B | POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 120 VOLTS. EQUIPPED WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. | VP-scientific |
| VP 763BCE | CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96B, OPERATES OFF 230 VOLTS. EQUIPPED WITH HEAT EXCHANGER TO CONTROL TEMPERATURE OF THE RESERVOIR. | VP-scientific |
| VP 763CE | CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 4 MAGNETIC CLUTCHES FOR VP 756C-96, OPERATES OFF 230 VOLTS | VP-scientific |
| VP 765B | POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 6 MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 120 VOLTS | VP-scientific |
| VP 765BCE | CE MARK POWER SUPPLY/DRIVE, DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 6 MAGNETIC CLUTCHES FOR VP 756CP-96B, OPERATES OFF 230 VOLTS | VP-scientific |
| VP 767-2 | IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG | VP-scientific |
| VP 767-2CE | IMPROVED CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, COUPLES TO VP 758-3 | VP-scientific |
| VP 767-2MAX | IMPROVED POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758-3MAX SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS WITH BANANA PLUG | VP-scientific |
| VP 767-3 | Magnetic Bead Stirring system for magnetic bead suspension as high as 450 ml | VP-scientific |
| VP 767M | POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS | VP-scientific |
| VP 767M-CE | CE MARK POWER SUPPLY, MOTOR HOUSING AND COUPLING FOR VP 758M SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS | VP-scientific |
| VP 768B | POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT EXCHANGER BUILT IN. | VP-scientific |
| VP 768BCE | CE MARK 230 VOLT POWER SUPPLY/DRIVE, MAXON DC BRUSH TYPE MOTOR WITH HOUSING, GEAR TRAIN WITH 8 MAGNETIC CLUTCHES FOR VP 755C-384B, WITH HEAT EXCHANGER BUILT IN. | VP-scientific |
| VP 769 | POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP 759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 120 VOLTS | VP-scientific |
| VP 769CE | POWER SUPPLY, MOTOR HOUSING AND GEAR SYSTEM FOR VP 759, VP 759P AND VP 759PTFE 4 SEALED DRIVE SHAFT SYSTEM, OPERATES OFF 230 VOLTS, CE COMPLIANT | VP-scientific |
| VP 770 | MAGNETIC LOADER AND UNLOADER SYSTEM FOR REMOVING STIRRERS FROM WELLS | VP-scientific |
| VP 770B | MAGNETIC LOADER FOR VP 779-5A | VP-scientific |
| VP 771 | HEAVY DUTY MAGNETIC STIR ELEMENT PICKUP SYSTEM AND STIR STIX LOADER | VP-scientific |
| VP 771-PD | Magnetic Bead Pellet Disrupter for robotic or manual disruption of pelleted beads in the wells of a microplate | VP-scientific |
| VP 771-PR | Magnetic Bead Pellet Resuspender for robotic or manual pulling of pelleted beads through the column of a microplate | VP-scientific |
| VP 771BT-G-4-1AZ | 425 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 384 Flat Bottom and 384 PCR Microplates. Made to fit in Bio Tek plate washer, price each | VP-scientific |
| VP 771BT-G-6AZ | Magnetic Separation Block, 96 round post magnets, for 384 PCR and 384 flat bottom microplates, 52 MGO NdFeB magnets. Made to fit in BioTek plate washer. | VP-scientific |
| VP 771BT-H-1AZ | 329 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 96 Flat Bottom Microplates And 96 PCR Plates. Made To Fit In BioTek Plate Washer. | VP-scientific |
| VP 771BT-LE-A | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, red anodized aluminum, made to fit in BioTek microplate washers | VP-scientific |
| VP 771BT-Q-1AZ | 384 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 384 Flat Bottom Plates. Made to fit in Bio Tek plate washer. | VP-scientific |
| VP 771BT-R-1Z | 96 Round Post NdFeB 52 MGO Magnetic Bead Separation Block For 96 Flat Bottom Plates. Made to fit in Bio Tek plate washer. | VP-scientific |
| VP 771C | LOADING MAGNET FOR VP 779-5A, 4" BY 6" BY 1" , MAGNET ENCASED IN WHITE ABS | VP-scientific |
| VP 771E-1 | Delrin Shim 3.2 mm tall to fit on VP 771E-2 to raise the microplate up and lower the magnet position in the wells. | VP-scientific |
| VP 771E-2 | 24 POST MAGNETIC BEAD SEPARATOR FOR 96 WELL MICROPLATES, 48 MGO NdFeB MAGNETS - FAST SEPARATION MAGNETS | VP-scientific |
| VP 771F | NON-MAGNETIC ADAPTOR BLOCK TO MIMIC MAGNETIC COLLECTOR/SEPARATOR BLOCK VP 771E | VP-scientific |
| VP 771G-4AAM-1 | Magnetic Bead Separation Block, for 384 standard well microplates, cut away design for robot gripper access, 425 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771G-4AM-1 | Magnetic Bead Separation Block, for 384 standard and deep well microplates, 425 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771G-4R | LOW PROFILE SBS REGISTRATION ADAPTOR PLATE FOR ROBOT APPLICATIONS. MATES TO ALL MAGNETIC SEPARATION BLOCKS | VP-scientific |
| VP 771G-4RM-1 | Registration Base, for aligning microplates on Magnetic Bead Separation Bases, SBS pocket on top surface, 8 of 8 plate guides have adjustable set screws, taller height, SBS footprint | VP-scientific |
| VP 771G-4WAM-1 | Magnetic Bead Separation Block, for 384 standard and deep well microplates, 425 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771G-7A-1 | Spacer for Magnetic Bead Separation Block VP 771G-7AM-1, white polycarbnate, 3mm thick, open center to fit around red aluminum magnet frame, rests on steel plate, raises microplate relative to magnet posts. | VP-scientific |
| VP 771G-7AAM-1 | Magnetic Bead Separation Block, for 384 well PCR microplates, cut away design for robotic gripper access, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771G-7AAS | Magnetic Bead Separation Block, for 384 well PCR microplates, cut away design for robotic gripper access, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771G-7AM-1 | Magnetic Bead Separation Block, for 384 well PCR microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771G-7AS | Magnetic Bead Separation Block, for 384 well PCR microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771G-8AAS | Magnetic Bead Separation Block for 384 PCR plates, 96 post magnets, 52 MGO, red anodized aluminum, 4mm thick steel plate notched for gripper access, SBS footprint, no Registration Base. | VP-scientific |
| VP 771HA | ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP 783N52C-3-6 MAGNETS (52 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR (VP 771G- | VP-scientific |
| VP 771HH-G-4 | Magnetic Bead Separation Block, handheld, for 384 well flat bottom plates or 384 conical well plates, 425 round post 52 MGO NdFeB magnets positioned around bottoms of wells, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-H | Magnetic Bead Separation Block, handheld, for 96 well flat bottom plates or 96 conical well plates, 329 round post 52 MGO NdFeB magnets positioned around bottoms of wells, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-LA | Magnetic Bead Separation Block, handheld, for 96 well PCR plates with full, half or no skirt or 96 well microplates with round or V-bottom wells, 24 round post 52 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-LF | Magnetic Bead Separation Block, handheld, for 96 well PCR plates with full, half or no skirt or 96 well microplates with round, flat or V-bottom wells, 24 round post 52 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-MC | Magnetic Bead Separation Block, handheld, for 96 deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-Q | Magnetic Bead Separation Block, handheld, for 384 well microplates,384 round post 52 MGO NdFeB magnet centered under each well, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HH-R | Magnetic Bead Separation Block, handheld, for 96 well microplates, 96 round post 52 MGO NdFeB magnet centered under each well, white polycarbonate magnet frame, polypropylene base, adjustable clips to hold plates, rubber O-Ring gripper on base. | VP-scientific |
| VP 771HWAM-1 | ROBOT 329 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 96 FLAT BOTTOM MICROPLATES OR 96 WELL CONICAL WELL PCR PLATES WITH 329 VP 783N52C-3-6 MAGNETS (52 MGO), WHITE POLYCARBONATE, SBS FOOTPRINT. MATES TO AND INCLUDES A LOW PROFILE ROBOT DECK ADAPTOR ( | VP-scientific |
| VP 771IAM-1 | Magnetic Bead Separation Block, for 384 PCR, standard well, and deep well microplates, 204 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771IWAM-1 | Magnetic Bead Separation Block, for 384 PCR, standard well, and deep well microplates, 204 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771JAM-1 | Magnetic Bead Separation Block, for 96 standard well microplates, 96 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771JWAM-1 | Magnetic Bead Separation Block, for 96 standard well microplates, 96 post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771L-1 | PCR PLATE HOLDER FOR USE WITH TECAN HYDROFLEX PLATE WASHER, POSITIONS PCR PLATE SECURELY OVER MAGNETS IN PLATE WASHER TRAY, WITH BOTTOM OF EACH WELL DIRECTLY ON TOP AND TOUCHING MAGNET. PRICE EACH. | VP-scientific |
| VP 771LAM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LAS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LB-3BM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~100 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LB-3BS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~100 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LC-3CM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, raised edge, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LC-3CS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, raised edge, no Registration Base | VP-scientific |
| VP 771LD-4CM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~10 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LD-4CS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~10 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LE-4AM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~75 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LE-4AS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~75 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LE-4BM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~50 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LE-4BS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~50 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LE-4CM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LE-4CS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~30 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LFWM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~15 ul, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LFWS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~15 ul, white polycarbonte, SBS footprint, no Registration Base | VP-scientific |
| VP 771LM-1 | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771LS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771LWAS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 52 MGO NdFeB magnets, bead pellet level ~200 ul, white polycarbonate, SBS footprint, no Registration Base | VP-scientific |
| VP 771LWS | Magnetic Bead Separation Block, for 96 well PCR microplates, 24 post 42 MGO NdFeB magnets, bead pellet level ~200 ul, white polycarbonate, SBS footprint, no Registration Base | VP-scientific |
| VP 771MA-1 | SPACER FOR VP 771MA TO ALLOW FOR A BROADER COMPATIBILITY OF PLATES. | VP-scientific |
| VP 771MAM-1 | Magnetic Bead Separation Block, for 6 well reservoirs/microplates and 24 and 48 well microplates, 4 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771MBM-1 | Magnetic Bead Separation Block, for 4 well microplates and reservoirs, 5 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771MCWM-1 | Magnetic Bead Separation Block, for 96 standard and deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771MCWS | Magnetic Bead Separation Block, for 96 standard and deep well microplates, 6 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base | VP-scientific |
| VP 771MDWM-1 | Magnetic Bead Separation Block for 96 well microplates or 96 deep well plates, 13 bar 50 MGO NdFeB magnets, white polycarbonate magnet frame, SBS footprint, includes Registration Base VP 771G-4RM-1. | VP-scientific |
| VP 771MDWS | Magnetic Bead Separation Block, for 96 deep well microplates, 13 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base | VP-scientific |
| VP 771MM-1 | Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771MWM-1 | Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771MWS | Magnetic Bead Separation Block, for 96 standard and deep well microplates, 7 bar 50 MGO NdFeB magnets, white polycarbonate, SBS footprint, no Registration Base | VP-scientific |
| VP 771NM-1 | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 111 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771OM-1 | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 117 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771PAM-1 | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, horizontal magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771PAS | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, horizontal magnetic pull, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771PM-1 | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771PS | Magnetic Bead Separation Block, for 96 deep well microplates with open architecture underneath, 24 tall square post 52 MGO NdFeB magnets, vertical magnetic pull, red anodized aluminum, SBS footprint, no Registration Base | VP-scientific |
| VP 771QAM-1 | Magnetic Bead Separation Block, for 384 standard and deep well microplates, 384 post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771QMA | MANUAL 384 ROUND POST NdFeB MAGNETIC BEAD SEPARATOR BLOCK FOR 384 WELL MICROPLATES WITH 425 VP 783N52C-3-6 MAGNETS (52 MGO), RED ANODIZED SBS FOOTPRINT. MATES TO AND INCLUDES VP 771G-4RM FOR USE WITH MANUAL ASPIRATION AND DISPENSING MANIFOLDS. | VP-scientific |
| VP 771QW-1-H4C | Handheld 384 Round Post NdFeB Magnetic Bead Separator Block For 384 Well Microplates With 384 NdFeB Magnets (52 MGO) Centered Under Each Well. O-Ring On Base Plate Facilitates Gripping. | VP-scientific |
| VP 771RM-1 | Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter post 52 MGO NdFeB magnets, red anodized aluminum, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771RWAM-1 | Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter, tall post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771RWM-1 | Magnetic Bead Separation Block, for 96 standard well microplates, 96 large diameter post 52 MGO NdFeB magnets, white polycarbonate, SBS footprint, includes VP 771G-4RM-1 Registration Base | VP-scientific |
| VP 771Z-384 | Adjustable registration jig to hold pipet tips off the bottom of 384 well Microplates on V&P magnetic separation | VP-scientific |
| VP 772 | SUPER MAGNET UNLOADING SYSTEM | VP-scientific |
| VP 772-CF25 | MAGNETIC STIR ELEMENT TO FIT CORNING 500ml PP CENTRIFUGE TUBE (#431123). INCLUDES STAINLESS STEEL ASPIRATION TUBE. | VP-scientific |
| VP 772-CF50 | Magnetic stir element to fit 50ml centrifuge tube. Includes stainless steel Aspiration tube. | VP-scientific |
| VP 772A | SUPER MAGNET STIR ELEMENT REMOVER WITH CROSS CONTAMINATION CONTROL | VP-scientific |
| VP 772BK-N42-11-23 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. 10/Pkg | VP-scientific |
| VP 772BK-N42-11-23.1 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperatue. Each | VP-scientific |
| VP 772BK-N42-11-36 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N42-11-36.1 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N42-11-48 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N42-11-48.1 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N42-11-61 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N42-11-61.1 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N52-11-23 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N52-11-23.1 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N52-11-36 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N52-11-36.1 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N52-11-48 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N52-11-48.1 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-N52-11-61 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-N52-11-61.1 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-S29-11-23 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. 10/Pkg | VP-scientific |
| VP 772BK-S29-11-23.1 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-S29-11-36 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-S29-11-36.1 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-S29-11-48 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-S29-11-48.1 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BK-S29-11-61 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BK-S29-11-61.1 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PEEK Encapsulated SmCo (29 MGO) Magnet, 300C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BN-24-127 | PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782N-12, SANDWICH STYLE, 15.25 MM DIAMETER BODY, 24 MM DIAMETER ENDS, 127.4 MM LONG, EACH | VP-scientific |
| VP 772BN-49-127 | PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 127 MM LONG, EACH | VP-scientific |
| VP 772BN-49-152 | PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 151.9 MM LONG, EACH | VP-scientific |
| VP 772BN-49-253 | PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 51 MM DIAMETER ENDS, 253 MM LONG, EACH | VP-scientific |
| VP 772BN-49-76 | PTFE SOLID BAR WITH POCKETS ENCASING PARYLENE COATED NdFeB MAGNETS, VP 782NC-8-13, SANDWICH STYLE, 30 MM DIAMETER BODY, 49 MM DIAMETER ENDS, 76.2 MM LONG, EACH | VP-scientific |
| VP 772BP-N42-11-23 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N42-11-23.1 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N42-11-36 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long. PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N42-11-36.1 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N42-11-48 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N42-11-48.1 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N42-11-61 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N42-11-61.1 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (42 MGO) Magnet, 150C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N52-11-23 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N52-11-23.1 | Magnetic Stir Bar - 11.5mm Diameter, 23.1mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N52-11-36 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N52-11-36.1 | Magnetic Stir Bar - 11.5mm Diameter, 35.5mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N52-11-48 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N52-11-48.1 | Magnetic Stir Bar - 11.5mm Diameter, 48.2mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772BP-N52-11-61 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature.10/Pkg | VP-scientific |
| VP 772BP-N52-11-61.1 | Magnetic Stir Bar - 11.5mm Diameter, 60.9mm Long.PVDF Encapsulated NdFeB (52 MGO) Magnet, 80C Maximum Operating Temperature. Each | VP-scientific |
| VP 772DK-N42-5-2 | Magnetic Stir Disc - 5mm diameter, 1.7mm thick. PEEK encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg | VP-scientific |
| VP 772DP-N42-24-3 | Magnetic Stir Disc - 24mm diameter, 2.9mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg | VP-scientific |
| VP 772DP-N42-5-2 | Magnetic Stir Disc - 5mm diameter, 1.7mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg | VP-scientific |
| VP 772DP-N42-8-2 | Magnetic Stir Disc - 8mm diameter, 1.9mm thick. PVDF encapsulated NdFeB (42 MGO) magnet, 150C maximum operating temperature. 10/pkg | VP-scientific |
| VP 772F | MAGNETIC BEAD SEPARATOR JIG FOR FOUR 100 ml GLASS OR 250 ML NALGENE BOTTLES, USES 2 NdFeB MAGNETS | VP-scientific |
| VP 772F1M | MAGNETIC BEAD SEPARATOR JIG FOR EIGHT 50 ML CONICAL TEST TUBES | VP-scientific |
| VP 772F1R | TUBE RACK FOR VP 772F1M MAGNETIC SEPARATOR. RACK HOLDS EIGHT 50 ML CONICAL TEST TUBES | VP-scientific |
| VP 772F2M-1 | Magnetic Bead Separator Base For A Variety of Tubes, Used With Any Of The Following Tube Racks, VP 772F2R-1, VP 772F2R-2, VP 772F2R-3. Clear Polycarbonate, White ABS, And Stainless Steel Rods. SBS Footprint. Each. | VP-scientific |
| VP 772F2M-1B | Non-Magnetic Base For Tube Racks VP 772F2R-1, VP 772F2R-2, VP 772F2R-3. Similar To VP 772F2M-1 But Without Magnet. Clear Polycarbonate And Stainless Steel Rods. SBS footprint. Each. | VP-scientific |
| VP 772F2M-1kit1 | VP 772F2M-1kit1 Magnetic Bead Separator System | VP-scientific |
| VP 772F2M-1kit2 | VP 772F2M-1kit2 Magnetic Bead Separator System | VP-scientific |
| VP 772F2M-1kit3 | VP 772F2M-1kit3 Magnetic Bead Separator System | VP-scientific |
| VP 772F2R-1 | Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 1.5ml Tubes (13mm OD), With 18mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B . SBS Footprint. Each. | VP-scientific |
| VP 772F2R-2 | Tube Rack For VP 772F2M-1 Magnetic Bead Separator For Use With 15ml Tubes (16.7mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS Footprint. Each. | VP-scientific |
| VP 772F2R-3 | Tube Rack For VP 772F2M-1 Magnetic Bead Separator, For Use With 50ml Tubes (29mm OD), With 23.5mm Spacing. Clear Polycarbonate. Mates To VP 772F2M-1 And VP 772F2M-1B. SBS Footprint. Each. | VP-scientific |
| VP 772F3 | SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH ONE 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDER MADE FROM 52 MGO NdFeB - PRICE EACH | VP-scientific |
| VP 772F4 | Magnetic separation stand 0.2 ml 8-strip PCR tubes . The stand has eight 6.35 mm diameter NdFeB magnets (52 MGO) positioned behind each PCR tube to capture magnetic beads to the side of the tubes. – Price Each | VP-scientific |
| VP 772F4-1 | Low Profile Magnetic separation stand 0.2 ml 8-strip PCR tubes . The stand has eight 6.35 mm diameter NdFeB magnets (52 MGO) positioned behind each PCR tube to capture magnetic beads to the side very close to the bottom of the tubes. – Price Each | VP-scientific |
| VP 772F5 | SINGLE MAGNETIC SEPARATION STAND FOR 1.5 ML MICRO-CENTRIFUGE TUBES WITH TWO 6.35MM DIAMETER AND 6.35MM TALL MAGNETIC CYLINDERS MADE FROM 52 MGO NdFeB - PRICE EACH | VP-scientific |
| VP 772F6 | Magnetic Separation Rack for eight 1.5ml or 2.0ml micro-centrifuge tubes with 16 10mm diameter and 6 mm tall magnetic cylinders made from 52 MGO NdFeB, pulls magnetic beads to the bottom - price each | VP-scientific |
| VP 772F9 | Magnetic Bead Separation Rack, handheld, for 1.5 or 2.0 ml snap cap microcentrifuge tubes, 12 tubes in removable rack, white Delrin, 2 round 52 MGO NdFeB magnets per tube on 18 mm centers in base with rubber O-ring gripper. | VP-scientific |
| VP 772FA | MAGNETIC BEAD SEPARATOR JIG FOR 250 AND 500 ML BOTTLES, PRICE EACH | VP-scientific |
| VP 772FA-1 | Magnetic bead separation system for 5 liter bottles consists of a powerful 48 MGO NdFeB magnet that is a 25.4 mm by 25.4 mm by 127 mm long (1“ x 1” x 5”). | VP-scientific |
| VP 772FB-1 | Single Magnetic Separation Stand made from HDPE (63.5mm diameter and 61mm tall) For 50ml centrifuge tubes with one magnetic cube (25.4mm on a side). Made from 48 MGO NdFeB. | VP-scientific |
| VP 772FB-1A | A clear Acrylic cylinder 29.22mm in diameter and 51.82mm long with a 16.44mm diameter hole drilled so it is tangent to the edge and has a 16.38mm wide opening to the magnet. Designed as an adaptor to fit inside a VP 772FB-1 and allow the use of test tubes | VP-scientific |
| VP 772FB-1B | Magnetic insert for VP 772FB-1, magnet pulls beads to conical side of 50ml tube bottom. | VP-scientific |
| VP 772FB-1C | Magnetic insert for VP 772FB-1 and VP 772FB-1A, magnet pulls beads to conical side of 15ml tube bottom. | VP-scientific |
| VP 772FC-2 | Magnetic Bead Separation Stand for 1 liter bottles, large 45 MGO NdFeB magnet, handle for decanting solution | VP-scientific |
| VP 772FN-10-35TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 | VP-scientific |
| VP 772FN-13-13 | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-12 NdFeB DISCS 1.58 MM THICK PTFE - SANDWICH STYLE, 13 MM DIAMETER, 10/PKG | VP-scientific |
| VP 772FN-13-19 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 19 MM LONG, PKG OF 10 | VP-scientific |
| VP 772FN-13-19A | PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg | VP-scientific |
| VP 772FN-13-29 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 29mm LONG, PKG OF 10 | VP-scientific |
| VP 772FN-13-29A | PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter NdFeb Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg | VP-scientific |
| VP 772FN-13-29TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 | VP-scientific |
| VP 772FN-13-33 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 33mm LONG, PKG OF 10 | VP-scientific |
| VP 772FN-13-67TFP | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK DESIGN PKG OF 10 | VP-scientific |
| VP 772FN-14-34CP | Sandwich Style Stir Element, cross design, for 6 well microplates, parylene coated NdFeB (48 MGO) magnets, 34 mm diameter x 14 mm height, 80 C maximum operating temperature. 10/pkg | VP-scientific |
| VP 772FN-16-30TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER NdFeB MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 25 | VP-scientific |
| VP 772FN-17-120A-150 | VP 772FN-17-120A-150 Sandwich style stir element. Made from PTFE, 17mm wide, 120mm long and 3.175mm thick with 2 sets of opposing pockets for 8 VP 782N-12-150 magnets, heat stable to 150C. Magnets placed in opposing polarity for conventional magnetic stir | VP-scientific |
| VP 772FN-17-45 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 17mm WIDE AND 45mm LONG, PKG OF 10 | VP-scientific |
| VP 772FN-17-45A | PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg | VP-scientific |
| VP 772FN-17-64 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3 mm THICK PLATE, 17mm WIDE AND 64mm LONG, LOW PROFILE STIR ELEMENT PKG OF 10 | VP-scientific |
| VP 772FN-17-64A | PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter NdFeB Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 2.3mm Thick Plate, 17mm Wide And 64mm Long, 10/pkg | VP-scientific |
| VP 772FN-20-21CV | Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 80C maximum operating temperature magnet, each | VP-scientific |
| VP 772FN-20-21CV-150 | Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 150C maximum operating temperature magnet, each | VP-scientific |
| VP 772FN-24-24 | PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782N-21-PM, Heat Stable to 80C NdFeB Discs 21.1mm In Diameter And 1.37mm Thick, Disc Shape, 4.8mm Thick PTFE - Sandwich Style, 24mm Diameter, 10/pkg | VP-scientific |
| VP 772FN-25-105MB | PPTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 | VP-scientific |
| VP 772FN-25-55TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 25mm WIDE AND 55mm LONG, TUNING FORK DESIGN PKG OF 10 | VP-scientific |
| VP 772FN-5-15V | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 5 MM WIDE AND 15 MM LONG, 10/PKG | VP-scientific |
| VP 772FN-5-16R | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 5 MM WIDE AND 16 MM LONG, 10/PKG | VP-scientific |
| VP 772FN-5-5 | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS, 1.58 MM THICK PTFE - SANDWICH STYLE, 5 MM DIAMETER, 10/PKG | VP-scientific |
| VP 772FN-5-5A | PTFE Flat Pocket Encasing 2 Parylene Coated 3.4mm Diameter NdFeB Magnets Sandwich Style, 2.27mm Thick, 5.1mm Diameter, 10/pkg | VP-scientific |
| VP 772FN-6-16TF | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG | VP-scientific |
| VP 772FN-6-16TFP | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG TUNING FORKS WITH WING TIPS, 10/PKG | VP-scientific |
| VP 772FN-6-34MB | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER NdFeB MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 | VP-scientific |
| VP 772FN-8-8 | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-6 NdFeB DISCS 1.58 MM THICK PTFE - SANDWICH STYLE, 7.9 MM DIAMETER, 10/PKG | VP-scientific |
| VP 772FNU-24 | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 NdFeB DISCS, 1.58 MM THICK PTFE - SANDWICH STYLE, UMBRELLA SHAPE FOR 24 WELL MICROPLATE, 24/PKG | VP-scientific |
| VP 772FNU-24P | POLYCARBONATE SUPPORT PLATE WITH 24 HOLES FOR USE WITH VP 772FNU-24 UMBRELLA STIRRERS | VP-scientific |
| VP 772FS-10-35TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 10 MM WIDE AND 35 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON ROUND BOTTOM, PKG OF 10 | VP-scientific |
| VP 772FS-13-13 | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-12 SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK DISC, 13.1 MM DIAMETER, PKG OF 10 | VP-scientific |
| VP 772FS-13-19 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 3.4mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 13mm WIDE AND 19mm LONG, PKG OF 10 | VP-scientific |
| VP 772FS-13-19A | PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg | VP-scientific |
| VP 772FS-13-29 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, PKG OF 10 | VP-scientific |
| VP 772FS-13-29A | PTFE Flat Pocket Encasing 4 Parylene Coated 3.4mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 13mm Wide And 19mm Long. 10/pkg | VP-scientific |
| VP 772FS-13-29TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 13 MM WIDE AND 29 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON BOTTOM PKG OF 10 | VP-scientific |
| VP 772FS-13-33 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 7 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 13 MM WIDE AND 33 MM LONG, PKG OF 10 | VP-scientific |
| VP 772FS-13-33A | PTFE flat pocket encasing 4 parylene coated 7 mm diameter SmCo magnets, sandwich style, opposite polarity for conventional and horizontal stirrers, 1.58 mm thick plate, 13 mm wide and 33 mm long. 10/pkg | VP-scientific |
| VP 772FS-13-67TFP | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 6mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 13mm WIDE AND 67mm LONG, TUNING FORK DESIGN PKG OF 10 | VP-scientific |
| VP 772FS-16-30TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,2.3 MM THICK PLATE, 16 MM WIDE AND 30 MM LONG, WITH TUNING FORK DESIGN WITH EARS AND A SPIN POINT ON FLAT BOTTOM, PKG OF 10 | VP-scientific |
| VP 772FS-17-45 | PTFE FLAT POCKET ENCASING 4 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS SANDWICH STYLE ,1.58 MM THICK PLATE, 17 MM WIDE AND 45 MM LONG, PKG OF 10 | VP-scientific |
| VP 772FS-17-45A | PTFE Flat Pocket Encasing 4 Parylene Coated 12mm Diameter SmCo Magnets Sandwich Style, Opposite Polarity For Conventional And Horizontal Stirrers, 1.58mm Thick Plate, 17mm Wide And 45mm Long, 10/pkg | VP-scientific |
| VP 772FS-19-120A | VP 772FS-19-120A1 Sandwich style stir element. Made from PTFE, 19mm wide, 120mm long and 5.17mm thick with 2 slots 6.36mm wide and 31.76 mm long with 2 sets of opposing pockets for 4 VP 779-13 magnets, heat stable to 300C. Magnets placed in opposing polar | VP-scientific |
| VP 772FS-20-21CV | Sandwich-Style Stir Element, torpedo cross design. 2.3mm thick PTFE plates (2 mm wide, 21mm long), 200C maximum operating temperature magnet, each | VP-scientific |
| VP 772FS-24-24 | PTFE Flat Pocket Encasing 4 Parylene Coated VP 782S-21 SmCo Magnets Sandwich Style 4.8mm Thick Disc, 24.1mm Diameter, 10/pkg | VP-scientific |
| VP 772FS-25-105MB | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12mm DIAMETER Sm Co MAGNETS SANDWICH STYLE, 2.3mm THICK PLATE, 24.8mm WIDE WITH EARS AND 104.7mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 | VP-scientific |
| VP 772FS-25-55TF | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 12 MM DIAMETER SmCo MAGNETS (VP 782S-12) SANDWICH STYLE ,2.3 MM THICK PLATE, 25 MM WIDE AND 55 MM LONG, TUNING FORK DESIGN PKG OF 10 | VP-scientific |
| VP 772FS-5-15V | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, V SHAPE, 1.58mm FLAT PTFE - SANDWICH STYLE, 5mm WIDE AND 15mm LONG, 10/PKG | VP-scientific |
| VP 772FS-5-16R | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, RECTANGULAR SHAPE, 1.58mm FLAT PTFE - SANDWICH STYLE, 5mm WIDE AND 16mm LONG, 10/PKG | VP-scientific |
| VP 772FS-5-5 | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782N-3 SmCo DISCS, 1.58 MM THICK PTFE - SANDWICH STYLE, 5 MM DIAMETER, 10/PKG | VP-scientific |
| VP 772FS-6-16TF | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 6.1 MM WIDE AND 16 MM LONG, 10/PKG | VP-scientific |
| VP 772FS-6-16TFP | PTFE FLAT POCKET ENCASING 2 PARYLENE ENCAPSULATED VP 782S-3 SmCo DISCS 3.38mm IN DIAMETER AND .635mm THICK, TUNING FORK SHAPE, 1.58 MM FLAT PTFE - SANDWICH STYLE, 6.1 MM WIDE WITH A PIVOT POINT AND 16 MM LONG TUNING FORKS WITH WING TIPS, 10/PKG | VP-scientific |
| VP 772FS-6-34MB | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED 3.45mm DIAMETER SmCo MAGNETS SANDWICH STYLE, 1.58mm THICK PLATE, 5.45mm WIDE AND 33.9mm LONG, MAGNETIC BEAD DESIGN PKG OF 10 | VP-scientific |
| VP 772FS-8-8 | PTFE FLAT POCKET ENCASING 2 PARYLENE COATED VP 782S-6 SmCo MAGNETS SANDWICH STYLE 1.58 MM THICK DISC, 7.9 MM DIAMETER, PKG OF 10 | VP-scientific |
| VP 772FSU-24 | VP 772FSU-24 PTFE Flat Pocket Encasing 2 Parylene Encapsulated VP 782S-3 SmCo Discs, 1.58mm Thick PTFE - Sandwich Style, Umbrella Shape For 24 Well Microplate, 24/pkg | VP-scientific |
| VP 772M-N52-15-57 | Sandwich-Style Stir Paddle - Made from 2.75mm thick Nylon-12, 15.1mm wheel diameter, 57.1mm long, with 3 sets of opposing pockets for 8 VP 782N-12 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each | VP-scientific |
| VP 772M-N52-27-111 | Sandwich-Style Stir Paddle - Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 111.8mm long, with 4 sets of opposing pockets for 8 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each | VP-scientific |
| VP 772M-N52-27-60 | Sandwich-Style Stir Paddle - Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 61mm long, with 2 sets of opposing pockets for 4 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each | VP-scientific |
| VP 772M-N52-27-85 | Sandwich-Style Stir Paddle - Made from 4.5mm thick Nylon-12, 26.4mm wheel diameter, 86.5mm long, with 3 sets of opposing pockets for 6 VP 782N-21 magnets, heat stable to 80C, Magnets placed in uniform polarity. Each | VP-scientific |
| VP 772PF3 | 3D Printed Single Magnetic Separation Stand For 1.5ml Micro-Centrifuge Tubes With One 6.35mm Diameter And 6.35mm Tall Magnetic Cylinder Made From 52 MGO NdFeB. White ABS. | VP-scientific |
| VP 772PF5 | 3D Printed Single Magnetic Separation Stand For 1.5ml Micro-Centrifuge Tubes With Two 0.250" Diameter And 0.250" Tall magnetic cylinders. White ABS. | VP-scientific |
| VP 772PT-13-41 | Magnetic Stir Bar - 12.7mm Diameter, 41.4mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-41-150 | Magnetic Stir Bar - 12.7mm Diameter, 41.4mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-54 | Magnetic Stir Bar - 12.7mm Diameter, 54.2mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-54-150 | Magnetic Stir Bar - 12.7mm Diameter, 54.2mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-67 | Magnetic Stir Bar - 12.7mm Diameter, 67.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-67-150 | Magnetic Stir Bar - 12.7mm Diameter, 67.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-80 | Magnetic Stir Bar - 12.7mm Diameter, 79.9mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC- 8- 13, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-13-80-150 | Magnetic Stir Bar - 12.7mm Diameter, 79.9mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-8-13-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-25-80OV-150 | Oval Shaped Black PEEK Stir Element, 25.4mm In Diameter And 80mm Long, Turned Down To Oval Shape, With Spin Ring In The Middle. Contains 4 VP 782NC-8-13-150 Magnets And 2 Polypropylene Set Screws, 1/pkg | VP-scientific |
| VP 772PT-6-19 | Magnetic Stir Bar - 6.35mm Diameter, 19.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-19-150 | Magnetic Stir Bar - 6.35mm Diameter, 19.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-25 | Magnetic Stir Bar - 6.35mm Diameter, 25.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-25-150 | Magnetic Stir Bar - 6.35mm Diameter, 25.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-32 | Magnetic Stir Bar - 6.35mm Diameter, 31.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-32-150 | Magnetic Stir Bar - 6.35mm Diameter, 31.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-38 | Magnetic Stir Bar - 6.35mm Diameter, 37.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-38-150 | Magnetic Stir Bar - 6.35mm Diameter, 37.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-44 | Magnetic Stir Bar - 6.35mm Diameter, 44.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-44-150 | Magnetic Stir Bar - 6.35mm Diameter, 44.1mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-51 | Magnetic Stir Bar - 6.35mm Diameter, 50.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-51-150 | Magnetic Stir Bar - 6.35mm Diameter, 50.3mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-57 | Magnetic Stir Bar - 6.35mm Diameter, 56.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-57-150 | Magnetic Stir Bar - 6.35mm Diameter, 56.6mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-63 | Magnetic Stir Bar - 6.35mm Diameter, 62.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6, NdFeB (48 MGO), 80C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772PT-6-63-150 | Magnetic Stir Bar - 6.35mm Diameter, 62.8mm Long. PEEK Tube Capped With Polypropylene Set Screws Encasing Parylene Coated VP 782NC-3-6-150, NdFeB (42 MGO), 150C Maximum Operating Temperature Magnet. 10/Pkg. | VP-scientific |
| VP 772T-11-16 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 16MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-19 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 19MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-28 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 27.9MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-32 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 32MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-34 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 34MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-41 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 40.6MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-47 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 47MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-54 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 53.5MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-11-67 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 11.4 MM DIAMETER, 66.6MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-11 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 10.7 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-15 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 15.1 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-22 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 21.7 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-28 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 27.7MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-34 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 34.2 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-41 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 41.4 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-48 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 47.6 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-54 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 53.8 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-61 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 60.8 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-68 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 67.5 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-74 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 74.2 MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-81 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 80.3MM LONG, PKG OF 10 | VP-scientific |
| VP 772T-6-87 | PTFE TUBE ENCASING A PARYLENE COATED NdFeB MAGNET SANDWICH STYLE , 6.35 MM DIAMETER, 87.2MM LONG, PKG OF 10 | VP-scientific |
| VP 773-10 | STIR CROSS, 10mm DIAMETER X 5mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 | VP-scientific |
| VP 773-19 | STIR CROSS, PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 19mm DIAMETER X 8mm THICK, 10/PKG | VP-scientific |
| VP 773D-10 | STIR DISC CROSS, 10mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 | VP-scientific |
| VP 773D-20 | STIR DISC CROSS, 20mm DIAMETER X 10mm thick, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 | VP-scientific |
| VP 773D-9 | STIR DISC CROSS, 9mm DIAMETER X 6mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, 10/PKG | VP-scientific |
| VP 773DC-10 | STIR DOUBLE CROSS HEAD, 10mm DIAMETER X 8mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 | VP-scientific |
| VP 773DC-14 | STIR DOUBLE CROSS HEAD, 14mm DIAMETER X 10mm THICK, PTFE ENCAPSULATED ALNICO MAGNET, PKG OF 10 | VP-scientific |
| VP 773I-9 | INVERTED CROSS CUVETTE STIRRER, 9 MM DIAMETER X 8.3 MM TALL, PTFE ENCAPSULATED ALNICO MAGNET, 10/PKG | VP-scientific |
| VP 773W-10,16 | WING STIRRER, 10mm WIDE AND 16mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 | VP-scientific |
| VP 773W-13,13 | WING STIRRER, 13mm WIDE AND 13mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 | VP-scientific |
| VP 773W-13,22 | WING STIRRER, 13mm WIDE AND 22mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 | VP-scientific |
| VP 773W-5,9 | WING STIRRER, 5.4mm WIDE AND 9.2mm TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 | VP-scientific |
| VP 773W-8,11 | WING STIRRER, 8 MM WIDE AND 11 MM TALL, PTFE ENCAPSULATED ALNICO MAGNET, PACKAGE OF 10 | VP-scientific |
| VP 774-15 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 15 MM LONG X 1.5 MM DIAMETER, 10/PKG | VP-scientific |
| VP 774-2 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 2 MM LONG X 2 MM DIAMETER, 10/PKG | VP-scientific |
| VP 774-5 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 5 MM LONG X 2 MM DIAMETER, 10/PKG | VP-scientific |
| VP 774-7 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 7 MM LONG X 2 MM DIAMETER, 10/PKG | VP-scientific |
| VP 774-8 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 1.5 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-10 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 10 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-12 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 3 MM DIAMETER, 100/PKG | VP-scientific |
| VP 775-13 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 13 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-20 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 20 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-3 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 3 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-30 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 30 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-35 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (SAMARIUM COBALT) 35 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-6 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 6 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-8 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 8 MM LONG X 3 MM DIAMETER, 10/PKG | VP-scientific |
| VP 775-A | AUTOCLAVEABLE DROP DISPENSER THAT LOADS VP 775-6, VP 775-8, VP 775-10 AND VP 775-12 PTFE MAGNETIC STIR BARS INTO 48 TEST TUBES (12 mm DIAMETER, 75 mm LONG ON 14 mm CENTERS), INCLUDES VP 771 | VP-scientific |
| VP 776-10-80 | Tapered, PTFE encapsulated Alnico Stir Bar Magnet, 80mm x 10mm – Price Each | VP-scientific |
| VP 776-12-165 | Round PTFE encapsulated Magnetic Stir Bars (Alnico) 165mm (+/- 8mm) long x 12mm (+/- 1.2mm) diameter, each | VP-scientific |
| VP 776-15 | OVAL PTFE ENCAPSULATED ALNICO MAGNET, 15mm X 6mm, 10/PKG | VP-scientific |
| VP 776-24-108R | Giant Stir Bar, Smooth No Ridges, With Permanent Pivot Ring,PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 24mm – Price Each | VP-scientific |
| VP 776-24-159R | Giant Stir Bar, Smooth No Ridges, With Permanent Pivot Ring,PTFE encapsulated Alnico Stir Bar Magnet, 159mm x 24mm – Price Each | VP-scientific |
| VP 776-25 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 776-25-108RR | Giant Stir Bar, Smooth No Ridges, PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 25mm – Price Each | VP-scientific |
| VP 776-25-157RR | Giant Stir Bar, Smooth No Ridges, PTFE encapsulated Alnico Stir Bar Magnet, 157mm x 25mm – Price Each | VP-scientific |
| VP 776-27-108 | Round PTFE encapsulated Magnetic Stir Bars (Alnico) 108mm (+/- 5.4mm) long x 27mm (+/- 2.7mm) diameter, each | VP-scientific |
| VP 776-27-159 | Round PTFE encapsulated Magnetic Stir Bars (Alnico) 159mm (+/- 8mm) long x 27mm (+/- 2.7mm) diameter, each | VP-scientific |
| VP 776-30-100OV | Oval, football shaped, PTFE encapsulated Alnico Stir Bar Magnet, 100mm x 30mm – Price Each | VP-scientific |
| VP 776-36-108P | Prism or Triangle shaped, PTFE encapsulated Alnico Stir Bar Magnet, 108mm x 36mm – Price Each | VP-scientific |
| VP 776-36-136P | Prism or Triangle shaped, PTFE encapsulated Alnico Stir Bar Magnet, 136mm x 36mm – Price Each | VP-scientific |
| VP 776-40 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 40 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 776-40-150OV | Oval, football shaped, PTFE encapsulated Alnico Stir Bar Magnet, 150mm x 40mm – Price Each | VP-scientific |
| VP 776-50 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 777-30 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 30 MM LONG X 6 MM DIAMETER, 10/PKG | VP-scientific |
| VP 777-38 | OCTAHEDRAL PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 38 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 777-40 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 40 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 777-51 | ROUND PTFE ENCAPSULATED MAGNETIC STIR BARS (RARE EARTH) 51 MM LONG X 8 MM DIAMETER, 10/PKG | VP-scientific |
| VP 777OV-64 | OVAL RARE EARTH PTFE ENCAPSULATED MAGNETIC STIR BARS 64 MM LONG X 20 MM DIAMETER, 10/PKG | VP-scientific |
| VP 778-12 | SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 12 MM LONG X 4 MM X 4 MM, 100/PKG | VP-scientific |
| VP 778-25 | SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 25 MM LONG X 5.5 MM X 5.5 MM, 10/PKG | VP-scientific |
| VP 778-35 | SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 35 MM LONG X 6 MM X 6 MM, 100/PKG | VP-scientific |
| VP 778-50 | SQUARE PTFE ENCAPSULATED MAGNETIC STIR BARS (ALNICO) 50 MM LONG X 7.5 MM X 7.5 MM, 10/PKG | VP-scientific |
| VP 779-13 | DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 13 MM DIAMETER X 1.7 THICK, 10/PKG | VP-scientific |
| VP 779-5 | DISC, PTFE ENCAPSULATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 5 MM DIAMETER X 1.8 THICK, 12/PKG | VP-scientific |
| VP 779-5A | Drop dispenser - 96 holes for VP 772FN5-5, VP 772FS5-5 and VP 779-5 PTFE stir discs, system includes a VP 770B magnetic loading block | VP-scientific |
| VP 779-6 | DISC, NICKEL COATED MAGNETIC STIR DISCS (SAMARIUM COBALT) 6.3 MM DIAMETER X 2.5 MM THICK, 10/PKG | VP-scientific |
| VP 781 | DEMAGNETIZER - 9" x 4-5/8" x 3-3/8" - POLE AREA OF 6 SQUARE INCHES,120 Volts | VP-scientific |
| VP 781A | DEMAGNETIZER, 230 VOLTS OR 120 VOLTS | VP-scientific |
| VP 782N-12 | NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 11.5mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782N-21 | NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 21.18mm IN DIAMETER AND 1.37mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782N-3 | NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 3.4mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 100/PKG | VP-scientific |
| VP 782N-6 | NdFeB (48MGO) MAGNETIC TUMBLE STIR DISCS, 6.4mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782NC-2-6 | NDFEB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, DIAMETER 2.15MM X 6.44MM. COATED WITH 0.05MM THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782NC-3-6 | NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 3.19mm IN DIAMETER AND 6.45mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782NC-3-6R | STIR BAR RETRIEVER WITH 2.36 MM DIAMETER STAINLESS STEEL BAR 127 MM LONG COUPLED TO A VP 782NC-3-6 | VP-scientific |
| VP 782NC-8-13 | NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDERS, 7.95mm IN DIAMETER AND 12.8mm LONG, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782S-12 | SmCo17 MAGNETIC TUMBLE STIR DISCS, 11.5 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782S-21 | SmCo17 MAGNETIC TUMBLE STIR DISCS, 21.18 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 782S-3 | SmCo17 MAGNETIC TUMBLE STIR DISCS, 3.4 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 100/PKG | VP-scientific |
| VP 782S-6 | SmCo17 MAGNETIC TUMBLE STIR DISCS, 6.4 mm IN DIAMETER AND .73mm THICK, COATED WITH 0.05mm THICK PARYLENE, 10/PKG | VP-scientific |
| VP 783NC-3-6 | NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.0MM DIAMETER X 6.3MM LONG, MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG | VP-scientific |
| VP 783NC-3.5-6 | NdFeB (48MGO) MAGNETIC TUMBLE STIR CYLINDER, 3.5MM DIAMETER X 6.3MM LONG, MAGNETIZED THROUGH THE DIAMETER, NICKEL COATED, 10/PKG | VP-scientific |
| VP 783NC-6-9 | NdFeB (42MGO)MAGNETIC TUMBLE STIR CYLINDER, 6.4mm DIAMETER, 9.5mm LONG, MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 10/PKG | VP-scientific |
| VP 783NS-3-3-3 | NdFeB (42MGO) MAGNETIC TUMBLE STIR CUBE, 3.2MM X 3.2MM X 3.2MM), MAGNETIZED THROUGH THE LENGTH, NICKEL COATED, 100/PKG | VP-scientific |
| VP 790 | CYBIO/MATRIX SLIDING PADDLE MIXER | VP-scientific |
| VP 791-24 | TRAPEZE STIRRER FOR 24 VIAL RACK | VP-scientific |
| VP 791-96 | TRAPEZE STIRRER FOR 96 WELL MICROPLATE | VP-scientific |
| VP 791PN42-42-32 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 150C Maximum Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. | VP-scientific |
| VP 791PN42-42-43 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 150C Maximum Operating Temperature NdFeB (42 MGO) Magnet. Priced Each. | VP-scientific |
| VP 791PN48-42-32 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. | VP-scientific |
| VP 791PN48-42-43 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C Maximum Operating Temperature NdFeB (48 MGO) Magnet. Priced Each. | VP-scientific |
| VP 791PS29-42-32 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 31.7mm Tall), 80C Maximum Operating Temperature SmCo (29 MGO) Magnet. Priced Each | VP-scientific |
| VP 791PS29-42-43 | Trapeze-Style Sandwich Stir Element. Flat Paddle Suspended Above Bottom Of Container. PTFE Suspension System (41.7mm Wide, 43.3mm Tall), 80C Maximum Operating Temperature SmCo (29 MGO) Magnet. Priced Each | VP-scientific |
| VP 792A | MAGNETIC BLOCKS AND SUPPORTS FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH SYSTEM | VP-scientific |
| VP 792B | BUBBLE PADDLE STIRRER WITH MAGNETIC CLUTCHES FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH | VP-scientific |
| VP 792C | MAGNETIC RETAINER FOR DISPOSABLE CYBIO MOVING PADDLE MIXER, EACH | VP-scientific |
| VP 792D | DISPOSABLE NALGENE POLYPROPYLENE RESERVOIRS NALGENE #1300-1301, 300 ML VOLUME, 128 MM X 86 MM X 43 MM, STERILE CASE OF 40 | VP-scientific |
| VP 792D-1 | POLYPROPYLENE DETACHABLE OUTLET PORT FOR USE WITH REAGENT RESERVOIRS. CAN BE USED WITH VP BUBBLE PADDLE RESERVOIRS AND AS AN ACCESSORY WITH THE VP 600 SERIES LIQUID LEVEL SENSOR. COMPATIBLE WITH VP 792D | VP-scientific |
| VP 801 | PTFE SANDWICH STEEPLE STIRRER, 5.6 MM WIDE, BY 15 MM TALL AND 1.58 MM THICK WITH TWO OPPOSING POCKETS 3.55 MM DIAMETER AND .069 MM DEEP | VP-scientific |
| VP 836A | REGISTRATION FRAME SYSTEM FOR 1536 PIN REPLICATOR | VP-scientific |
| VP 838 | REPLICATOR - 1536 PIN - 0.457mm DIAMETER - DELIVERS ~20nl | VP-scientific |
| VP 838FP1 | 1536 FLOATING TUBE PIN REPLICATOR - 0.457mm PIN DIAMETER, 17mm LONG, DELIVERS ~20nl | VP-scientific |
| VP 838FP3 | 1536 FLOATING TUBE PIN REPLICATOR - 0.787mm PIN DIAMETER, 17mm LONG - DELIVERS ~80nl | VP-scientific |
| VP 838FP4 | FLOATING PIN REPLICATOR - 1536 PINS - 0.914mm DIAMETER, 17.4mm LONG, DELIVERS ~110nl | VP-scientific |
| VP 838FP8 | FLOATING PIN REPLICATOR - 1536 PINS - 0.356mm DIAMETER, 17.4mm LONG, DELIVERS ~12nl | VP-scientific |
| VP 838FP9 | 1536 FLOATING TUBE PIN REPLICATOR - 0.229mm PIN DIAMETER, 17mm LONG - DELIVERS ~4nl | VP-scientific |
| VP 881 | LIBRARY COPIER - FOR 1536 GREINER MICROPLATES | VP-scientific |
| VP 881A | LIBRARY COPIER - FOR 1536 CORNING COSTAR MICROPLATES | VP-scientific |
| VP 882 | LIBRARY COPIER - FOR GLASS PLATES AND NYLON MEMBRANES | VP-scientific |
| VP 903R-1536 | PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 1536 WELL MICROPLATES | VP-scientific |
| VP 903R-384 | PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 384 WELL MICROPLATES | VP-scientific |
| VP 903R-96 | PIN TOOL, PIPET TIP, AND MANIFOLD REGISTRATION TARGET PLATE FOR 96 WELL MICROPLATES | VP-scientific |
| VP 904 | PIN TOOL DRYER, 110 VOLTS AC. PIN TOOL ACTIVATING SWITCH AND VP 581B LOCATING FEATURE. | VP-scientific |
| VP 904-1 | Pin Tool Dryer, 110 volts AC, Pin Tool activating switch, VP 581B locating feature with attachment holes 5mm off center | VP-scientific |
| VP 920 | TWISTER I PLATE HANDLER/STACKER (USED SYSTEM) 3 AXIS ROBOT WITH GRIPPER AND TWO 20 PLATE STACKERS | VP-scientific |
| VP 920A | EXTENDED CAPACITY STACKERS FOR TWISTER I, (USED SYSTEM) THREE 20 PLATE STACKERS | VP-scientific |
| VP OK10 | VICKI REGISTRATION STARTER KIT | VP-scientific |
| VP OK11 | FU-MEEI REGISTRATION STARTER KIT | VP-scientific |
| VP OK12 | MEMBRANE MACROARRAY STARTER KIT FOR 96 WELL MICROPLATES | VP-scientific |
| VP OK13 | MEMBRANE MACROARRAY STARTER KIT FOR 384 WELL MICROPLATES | VP-scientific |
| VP OK14 | BASIC MEMBRANE MACROARRAY STARTER KIT FOR FIXED PIN & E-CLIP REPLICATORS | VP-scientific |
| VP OK14A | BASIC MEMBRANE MACROARRAY STARTER KIT FOR FP SERIES REPLICATORS | VP-scientific |
| VP OK15 | ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS | VP-scientific |
| VP OK15PE | PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 96 PIN TOOLS | VP-scientific |
| VP OK16 | ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS | VP-scientific |
| VP OK16PE | PERKIN ELMER ROBOT DUAL COMBINATION WASH AND BLOT KIT FOR 384 PIN TOOLS | VP-scientific |
| VP OK17 | STANDARD ROBOT PIN TOOL ACCESSORY KIT | VP-scientific |
| VP OK18 | ROBOT HOT SWAPABLE PIN TOOL ACCESSORY KIT | VP-scientific |
| VP OK19 | ROBOT LOW PROFILE PIN TOOL ACCESSORY KIT | VP-scientific |
| VP OK20 | PERKIN ELMER ROBOT PIN TOOL ACCESSORY KIT | VP-scientific |
| VP OK21 | SPA STIRRING SYSTEM FOR 96 PIPETTOR | VP-scientific |
| VP OK22 | SPA STIRRING SYSTEM FOR 96 PIPETTOR, CE VERSION | VP-scientific |
| VP OK7 | REPLICATOR STARTER KIT | VP-scientific |
| VP OK8 | SEAL & FREEZE STARTER KIT | VP-scientific |
| VP OK9 | DEEP WELL REPLICATOR STARTER KIT | VP-scientific |
| VP OK9A | GROOVED DEEP WELL REPLICATOR STARTER KIT | VP-scientific |
| Products Groups | ||||
|
Conventional Magnetic Stir Plates, Grinders and Macerators
Magnetic Stir Bars and Discs
Slurry and Particulate suspension products
|
||||
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
- 作者
- 内容
- 询问日期
技术资料暂无技术资料 索取技术资料
VP-scientific
询价
