• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        Mag-Binds Plant DNA Kit Magnetic Fast Protocol

        互联网

        895

        实验试剂

         

        Regents to be provided by user

        1. Absolute (96%-100%) ethanol

        实验设备

         

        Equipments to be provided by user

        1. Centrifuge capable of 4,000 x g.

        2. 96 well Plate

        3. Water bath preset at 65-70°C

        4. Equipment for disrupting plant tissue (MM300 Mixer Mill or Geno/Grinder 2000)

        实验步骤

         

        1. Collect plant tissue (start with 50mg for fresh sample and 10mg for dried samples) in a 1.2 ml 96 well plate with appropriate steel beads. Add 600ul Buffer SLX Minus and 4ul RNase A.

        2. Process in the mixer mill machine by following manufacturer’s instructions. Time and speed will need to be determined for each type of sample.

        3. Incubate at 70°C for 10 minutes. Mix sample once during incubation by shaking.

        4. Centrifuge at 3,000-5,000 x g (5,000 x g is better, if available) for 15 min. Compact pellets will form at bottom of tubes but some particles may float. Be careful to avoid those particles during the transfer in next step.

        5. Carefully transfer 400 ul supernatant to 2ml Deep Well Plate, making sure not to disturb the pellet or transfer any debris.

        6. Add 20 ul MagSi Particles and 280 ul absolute thanol to each well. Shaking to mix for 2 min.

        Note: Absolute ethanol and MagSi Particles can be premix. MagSi Particles will bead together in its container after several minutes It must be fully suspended by shaking or vortexing before use.

        7. Place the plate on a magnetic separation device to magnetize the MagSi particles for 2-5 minutes. Remove and discard the cleared supernatant.

        8. Remove the plate containing the MagSi particles from the magnetic separation device. Add 500ul SPM Wash Buffer to each well.

        9. Resuspend Magsi particles pellet by shaking for 1 min. Place the tube on a magnetic separation device to magnetize the MagSi particles. Removeand discard the cleared supernatant.

        10. Remove the plate containing the MagSi particles from the magnetic separation device. Add 500ul SPM Wash Buffer to each well.

        11. Resuspend MagSi particles pellet by shaking for 1 min. Place the tube on a magnetic separation device to magnetize the MagSi particles. Remove and discard the cleared supernatant.

        12. Leave the plate to air dry on the magnetic separation device for 10min. Remove any residue liquid from tube by pipetting.

        13. Remove the tube from magnetic separation device. Add 50-100ul Elution Buffer or water to elute DNA from the magnetic particles.

        14. Resuspend MagSi particles by shaking for 1 min. Incubate 5 min at room temperature (best at 55-65NC). Shaking for 3 minutes.

        15. Place the tube onto a magnetic separation device to magnetize the MagSi particles. Transfer the cleared supernatant containing purified DNA to a new plate.

        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序