产品封面图

Glucagon Like Peptide 1 Recept

or (GLP1R) ELISA Kit, Human
收藏
  • $952
  • KAMIYA BIOMEDICAL COMPANY
  • KT-35666
  • 美国加利福尼
  • 2025年07月08日
    avatar
  • 企业认证

    点击 QQ 联系

    • 详细信息
    • 文献和实验
    • 技术资料
    • 库存

      50

    • 英文名

      Glucagon Like Peptide 1 Receptor (GLP1R) ELISA Kit, Human

    • 保质期

      12个月

    • 供应商

      钰博生物

    • 保存条件

      -20°C

    • 规格

      96 tests

    Glucagon Like Peptide 1 Receptor (GLP1R) ELISA Kit, Human
    For quantitative detection in human samples.  (no photo available) 96 tests $952 KT-35666
    COMPONENTS
    Reagents Quantity
    Pre-coated, ready to use 96-well strip plate 1
    Calibrator 2
    Calibrator Diluent 1 × 20 mL
    Detection Reagent A 1 × 120 uL
    Detection Reagent B 1 × 120 uL
    Assay Diluent A 1 × 12 mL
    Assay Diluent B 1 × 12 mL
    TMB Substrate 1 × 9 mL
    Stop Solution 1 × 6 mL
    Wash Buffer (30X concentrate) 1 × 20 mL
    Plate sealer for 96 wells 4
    MATERIALS REQUIRED BUT NOT SUPPLIED
    1. Microplate reader with 450 ± 10 nm filter.
    2. Precision single or multi-channel pipettes and disposable tips.
    3. Eppendorf Tubes for diluting samples.
    4. De-ionized or distilled water.
    5. Absorbent paper for blotting the microtiter plate.
    6. Container for Wash Solution. STORAGE All the reagents should be kept according to the labels on vials. The Calibrator, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20°C upon being received while the others should be at 4°C. The unused strips should be kept in a sealed bag with the desiccant provided to minimize exposure to damp air. Opened test kits will remain stable for 1 month, provided it is stored as prescribed above.
    SAMPLE COLLECTION AND STORAGE
    Plasma
    Collect plasma using 3.8% sodium citrate (sodium citrate:blood = 1:9) as an anticoagulant. Centrifuge samples for 15 minutes at 1000 × g at 4°C within 30 minutes of collection. Remove plasma and assay immediately or store
    samples in aliquot at -20°C or -80°C for later use. Avoid repeated freeze/thaw cycles. Note:
    1. Samples to be used within 5 days may be stored at 4°C, otherwise samples must be stored at -20°C (≤1 month) or -80°C (≤2 months) to avoid loss of bioactivity and contamination.
    2. When performing the assay slowly bring samples to room temperature. 3. Sample hemolysis will influence the result, so hemolytic specimen can not be detected.
    REAGENT PREPARATION
    Bring all kit components and samples to room temperature (18-25°C) before use.
    产品细节图片1
    Detection Reagent A and B
    Briefly spin or centrifuge the stock Detection Reagent A and Detection Reagent B before use. Dilute to the working concentration with Assay Diluent A or B, respectively (1:100).
    Wash Solution
    Dilute 20 mL of Wash Solution concentrate (30X) with 580 mL of de-ionized or distilled water to prepare 600 mL of Wash Solution (1X).
    ASSAY PROCEDURE SUMMARY
    1. Prepare all reagents, samples and calibrators;
    2. Add 100 µL calibrator or sample to each well. Incubate 2 hours at 37°C;
    3. Add 100 µL prepared Detection Reagent A. Incubate 1 hour at 37°C;
    4. Aspirate and wash 3 times;
    5. Add 100 µL prepared Detection Reagent B. Incubate 30 minutes at 37°C;
    6. Aspirate and wash 5 times;
    7. Add 90 µL Substrate Solution. Incubate 15-25 minutes at 37°C;
    8. Add 50 µL Stop Solution. Read at 450 nm immediately.
    IMPORTANT NOTES
    1. The final experimental results will be closely related to operation skills of the end users and theexperimental environments. Please make sure that sufficient samples are available.
    2. Kits from different batches may be a little different in detection range, sensitivity and color developingtime. Please perform the experiment exactly according to the instruction attached in kit whileelectronic ones from our website (www.k-assay.com) is only for information.
    3. Do not mix or substitute reagents from one kit lot to another. Use only the reagents supplied bymanufacturer.
    4. Protect all reagents from strong light during storage and incubation. All the bottle caps of reagentsshould be covered tightly to prevent the evaporation and contamination of microorganism.
    5. There may be some foggy substance in the wells when the plate is opened at the first time. It will nothave any effect on the final assay results. Do not remove microtiter plate from the storage bag untilneeded.
    6. Wrong operations during the reagents preparation and loading, as well as incorrect parameter settingfor the plate reader may lead to incorrect results. A microplate plate reader with a bandwidth of 10 nmor less and an optical density range of 0-3 O.D. or greater at 450 ± 10 nm wavelength is acceptablefor use in absorbance measurement. Please read the instruction carefully and adjust the instrumentprior to the experiment.
    7. Even the same operator might get different results in two separate experiments. In order to get betterreproducible results, the operation of every step in the assay should be controlled. Furthermore, apreliminary experiment before assay for each batch is recommended.
    8. Each kit has been strictly passed Q.C. test. However, results from end users might be inconsistentwith our in-house data due to some unexpected transportation conditions or different lab equipments.
    Intra-assay variance among kits from different batches might arise from above factors, too.
    9. Kits from different manufacturers for the same item might produce different results, since we haven’tcompared our products with other manufacturers.
    10. The Stop Solution suggested for use with this kit is an acid solution. Wear eye, hand, face, andclothing protection when using this material.
     

    风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。

    图标文献和实验
    相关实验
    • 【申请上传】Current Protocols in Immunology

      and Human Interleukin 9 Unit 6.14 Measurement of Mouse and Human Interleukin 10 Unit 6.15 Measurement of Human Interleukin 11 Unit 6.16 Measurement of Human and Mouse Interleukin-12 Unit 6.17 Measurement of Human and Murine Stem Cell Factor (c-kit Ligand

    • 人细胞因子试剂盒

      因子 >>> 分装 ELISA 试剂盒 货号 品名 方法 规格 价格 备注 F00010 血管紧张素转化酶 (Human ACE) ELISA 48T/96T 2000/3000 进口分装 F00020 激活素 A(Activin A) ELISA 48T/96T 2000/3000 进口分装 F00021 雄激素结合蛋白 (ABP) ELISA 48T/96T 1800/2800 进口分装 F00022 促肾上腺皮质激素 (ACTH) ELISA 48T/96

    • 液相芯片技术的原理与应用进展

      ,平均批间变异系数为11.4%;液相芯片与ELISA法检测结果的相关系数R2为0.88~0.99。   国外多家公司已推出了商品化的细胞因子液相芯片检测试剂盒,比如R&D 公司的Flurokine MAP系列、Linco Research公司的LINCOplex 试剂盒、BioSource公司的Antibody Bead Kit、Bio Rad公司的Bio Plex系列等,可用于来自人、小鼠、大鼠的样品,既有一次检测单种细胞因子的试剂盒,也有预先混合多种细胞因子抗体交联微球而一次检测多个指标

    图标技术资料

    暂无技术资料 索取技术资料

    同类产品报价

    产品名称
    产品价格
    公司名称
    报价日期
    询价
    默瑞(上海)生物科技有限公司
    2025年07月11日询价
    询价
    上海博湖生物科技有限公司
    2025年07月14日询价
    询价
    上海邦景实业有限公司
    2025年07月08日询价
    询价
    上海抚生实业有限公司
    2025年06月21日询价
    询价
    北京博蕾德生物科技有限公司
    2025年07月15日询价
    Glucagon Like Peptide 1 Receptor (GLP1R) ELISA Kit, Human
    $952