- ￥300
- 鼎国
- MMR005
- 北京
- 2025年07月09日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件：
RT
- 库存：
大量
- 供应商：
鼎国昌盛
- 规格：
25ml
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验Preparation of denaturing 6% polyacrylamide gels for microsatellite analysis
between working with Repel-silane and Bind-silane a) Clean the plate with detergent (25% Lipsol) and warm water. (You may also need to use a razor blade to remove old bits of gels that have stuck). Rinse. b) Clean the upper surface
SSR GEL and Silver Staining Protocol
8 cm, and one lid Two rocking platforms Heat block for microtiter plates. A microplate vortexer is helpful. II. MOLD ASSEMBLY: Notes: Bind silane is toxic and should be used in a chemical fume hood. Wear gloves when handling this solution. Use
SSR GEL and Silver Staining Protocol
before working with bind silane and take care not to cross contaminate the plates with the two treatments. The acrylease treatment only needs to be repeated every four gels or so. 3. Prepare fresh 1 ml binding solution by making a solution 0.0005-0.001% bind
技术资料暂无技术资料 索取技术资料
