• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        Polyacrylamide Gel Electrophoresis of Oligonucleotides

        互联网

        902

        1. Pour and polymerize a 20% polyacrylamide gel, no Urea.

        2. Remove clamps. Rinse with water. Remove comb. Rinse top of gel well.

        3. Insert comb teeth down until teeth just touch the gel. Mount the plates in apparatus. Fill chambers with 0.5X TBE and prerun at low wattage for 10 min.

        4. Load oligonucleotides to gel.

        5. Run narrow gels at 35 W. Run wide gels at 80 W. Run until Bromophenol Blue is 3/4 way down.

        6. Decant buffer from apparatus. Remove gel and lay flat.

        7. Remove comb and side spacers. Pry apart plates with a spatula. If the gel is stuck to the top plate, resettle plates and invert.

        8. Lift the upper plate off. If bubbles arose, wet gel with 10% Acetic Acid and work them out. Pat dry gently with a Kim-Wipe.

        9. If 35S or 33P nuclides are used:

        A. Soak gel 15 min in 10 % Acetic acid. Pat dry.
        B. Cover gel with Whatman 3MM paper. Lift off gel stuck on paper. Cover with plastic wrap.
        C. Dry in vacuum gel drier for 20 min at 80 C. If soaked, dry 60 min.
        D. If soaked, removed plastic wrap.
        E. Expose to X-ray film.

        10. If non-radioactive, stain with Ethidium bromide for 5 min. Illuminate with ultraviolet

        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序