• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        RNA Isolation Protocol

        互联网

        998

         

        RNA Isolation Protocol
        (Revised 5-15-2003)

        Stabilize RNA

        Start with 15 ml E. coli Culture containing 7.undefined 109 cells (OD600 = 0.2 Dilute cells or scale up)
        • Pipet 30 ml of RNAProtect Bacteria Reagent (Qiagen) into a 50ml polypropylene conical tube.
        • Pipet 15 ml culture into the tube.  Mix immediately by vortexing for 5second.  Incubate for 5min at room temperature.
        • Centrifuge for 10min at 5800g( 4500rpm for H-6000A rotor in SORVALL RC-3B centrifuge)
        • Decant the supernatant, and leave tubes inverted on a paper towel for 10s.
        • Freeze the pellet with EtOH/Dye Ice mix.
        • The pellet can be stored at -20°C up to 2 weeks, or -70°C for up to 4 weeks.

        Isolation RNA

        • Dilute 2ul of Proteinase K into 300ul of Tissue and Cell Lysis solution for each sample.
        • Resuspend cell pellet by the Lysis solution and mix thoroughly. Transfer mix to 1.5ml tube.
        • Incubate at 65°C for 45min, and vortex every 15min.
        • Place the sample on ice for 5min.
        • Add 150ul of MPC protein Precipitation Reagent to 300ul of lysed sample and vortex mix for 10sec.
        • Spin for 10min 4°C at max speed in a microcentrifuge. Transfer the supernant to a clean tube.
        • Add 50ul of MPC protein Precipitation Reagent and repeat above step.
        • Add 500ul isopropanol to the recovered supernatant, invert the tube 30-40 times.
        • Pellet the RNA by centrifugation at 4°C for 10min in a microcentrifuge.
        • Carefully pour off the isopropanol without dislodging the RNA pellet. Remove all of the residual isopropanol with a pipet. Air dry 10-15min.

        Removal of contaminating DNA

        • Dilute 10ul of RNAse-Free DNAse I up to 200ul with 1x DNAse Buffer for each sample.
        • Completely resuspend the nucleic acid pellet in 200ul of DNAse I solution.
        • Incubation at 37deg;C for 45min
        • Add 200ul of 2x T and C lysis solution, vortex mix for 5 seconds
        • Add 200ul of MPC reagent vortex mix 10seconds, place on ice 5min.
        • Pellet the debris by centrifugation for 10min at 4°C, >10,000g in a microcentrifuge.
        • Add 50ul of MPC reagent and repeat 5 and 6 (but this time spin 20min).
        • Add 600ul isopropanol to the recovered supernatant, invert the tube 30-40 times.
        • Pellet the RNA by centrifugation at 4°C for 10min in a microcentrifuge.
        • Carefully pour off the isopropanol without dislodging the RNA pellet.
        • Rinse with 75% EtOH (DEPC H2 O), being careful to not dislodge the pellet. Centrifuge 5min at 4°C
        • Remove all of the residual EtOH with a pipet. Air dry 10-15min.
        • Resuspend the nucleic acid in 52ul RNAse-free water.

        Storage, Quantitation and Determination of Quality of RNA

        • Electrophoresis on 1% Agarose gel with 1ul sample.
        • Dilute 1ul sample to 100ul with TE(10mM Tris.HCl pH 8, 1mM EDTA), and measure A260 and A280 with a spectrophotometer.. Alternatively 1ul sample can be used to measure A260 and A280 on a Nanodrop ND-1000 Spectrophotometer without dilution.
        • Concentration of RNA sample = 40 x A260 x 100 (Dilution factor) (ug/ml)
        • A260/A280 Ratio = A260/A280, ranging from 1.7 to 2.1
        • Add 100ul EtOH (2 volume) and 5ul 3M NaOAC (1/10 volume), store at -20°C

        Regents

        • RNAProtect Bacteria Reagent Qiagen
        • MasterPure RNA Isolation Kit Epicentre

         

        Note: This protocol was adapted from the original Qiagen and Epicentre protocols

         

        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序