- ￥263 - 9070
- TargetMol
- 美国
- T6167
- 2025年07月16日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件：
零下80~20°C
- 保质期：
Powder: -20°C for 3 years In solvent: -80°C for 2 years
- 英文名：
SU9516
- 库存：
10
- 供应商：
TargetMol
- CAS号：
377090-84-1
- 规格：
100 mg/50 mg/500 mg/1 mL/2 mg/10 mg/5 mg/1 mg/25 mg
| 规格： | 100 mg | 产品价格： | ￥4170.0 |
|---|---|---|---|
| 规格： | 50 mg | 产品价格： | ￥2810.0 |
| 规格： | 500 mg | 产品价格： | ￥9070.0 |
| 规格： | 1 mL | 产品价格： | ￥689.0 |
| 规格： | 2 mg | 产品价格： | ￥369.0 |
| 规格： | 10 mg | 产品价格： | ￥913.0 |
| 规格： | 5 mg | 产品价格： | ￥578.0 |
| 规格： | 1 mg | 产品价格： | ￥263.0 |
| 规格： | 25 mg | 产品价格： | ￥1860.0 |
Product Introduction
Bioactivity
英文名:SU9516
描述:SU9516 is a potent CDK2 inhibitor, with an IC50 of 22 nM, and also has inhibitory effects on CDK1 and CDK4, with IC50s of 40 nM and 200 nM, respectively.
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验Fabrication of Polydimethylsiloxane Microfluidics Using SU-8 Molds
We detail the widely prevalent technique of polydimethylsiloxane (PDMS) molding using SU-8 for creating microfluidic chambers and channels. Although other techniques such as injection molding are more apt for mass manufacturing and cost
Rapid Prototyping of PDMS Devices Using SU-8 Lithography
This protocol describes the fabrication of single and multi-layer SU-8 microstructures for generating microfluidic devices via PDMS (polymethyldisiloxane) casting. SU-8 is a negative, thick-film, epoxy based photoresist
with FGF signaling by treating embryos with SU5402 (Calbiochem), a FGF receptor inhibitor. We observed craniofacial deformities and delayed maturation in embryos treated with SU5402. this indicates that FGF signaling is required for cranifacial formation
技术资料暂无技术资料 索取技术资料
