相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
相关阅读
细胞污染识别与处理全攻略:5 种常见类型+关键误区Cytoscape 教程来了!快速实现顶刊同款通路网络图五大应用案例:Mustang Q 膜层析应用全解析1 个小工具,一次性搞定流程图、质粒图谱和信号通路图- 详细信息
- 文献和实验
- 技术资料
- 库存:
999
- 英文名:
Percoll 细胞分离液
- CAS号:
/
- 保质期:
见瓶身
- 供应商:
麦格生物
- 保存条件:
见瓶身
- 规格:
1L
A low-viscosity, non-toxic medium suitable for density gradient centrifugation of cells, viruses and subcellular particles.
Composed of colloidal silica coated with polyvinylpyrrolidone (PVP), which gives low osmolality and low viscosity.
For separation of cells, subcellular particles and larger viruses (down to ~ 70S) under gentle conditions which preserve viability and morphological integrity.
Non-toxic to cells.
Adjustable to physiological ionic strength and pH.
Gradients can either be pre-formed or spontaneously generated by centrifugation at moderate speeds in an angle-head rotor.
Gradients are iso-osmotic throughout and cover a range of densities up to 1.3 g / mL.
Quick and easy
Percoll is a low viscosity density gradient medium for preparation of cells, subcellular particles, and larger viruses. The low viscosity of the medium enables cell preparation on preformed gradients in only a few minutes using low centrifugal forces (200 to 1000 × g). The medium is available in easy-to-open, resealable 250 mL and 1 L bottles.
Other attributes
Percoll consists of silica particles (15 to 30 nm diameter) coated with non-dialyzable polyvinylpyrrolidone (PVP). Free PVP is present at only 1% to 2%. Percoll is non-toxic, almost chemically inert and does not adhere to membranes. Percoll gradients can be formed within the density range of 1.0 to 1.3 g/mL, and are iso-osmotic throughout.
Percoll can be stored unopened at room temperature for five years. At -20°C, it can only be stored for up to six months.
If stored at -20°C, gradients form upon thawing, necessitating a mixing of the bottle before use. Preformed gradients can be stored for weeks without a change in gradient shape, provided that the gradient remains unfrozen.
Percoll can be buffered within the pH range 5.5 to 10.0 without any changes in properties. If pH drops below 5.5, gelling may occur. Gelling can also be caused by the presence of divalent cations, an effect which is exacerbated by elevated temperatures.
Undiluted Percoll can be resterilized by autoclaving for 30 min at 120°C.
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验。 Percoll浓度(%) 70 60 50 40 30 20 比重g/ml 1.090 1.077 1.067 1.056 1.043 1.031 2. 不连续密度梯度Percoll层的制备: 先将试管壁用牛血清湿润,除去多余血清,这种预处理可使逐层叠加的Percoll液
液界 liquid junction 指二种浓度或不同组成的电解质的接触面。液界可简单地把比重轻的溶液由重叠在重液之上而形成,但随着时间的进行,由于扩散或对流等可多少出现液体的混合。为防止混合可采取放置多孔质的膜以延缓扩散,或不断流动液体更新液界等方法。在液界上可产生液界电位( liquid junction potential, EL )。比较简单的是在浓度不同的同一种一价的电解质溶液间或浓度相同并且具有共同的离子的不同的电解质溶液间的情况下,液界电位的大小与液界的混合
试剂 1. 小牛血清 2. Percoll细胞分离液 3. 8.5%NaCl 4. 1.5MPBS 实验设备 1. 高速冷冻离心机(3K-30) 2. 4℃、-20℃冰箱 3. 长针头注射器 4. 1.5mL和10mL离心管 实验材料 PBMC细胞 实验步骤 1. 不同
技术资料暂无技术资料 索取技术资料









