• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        Respiration: Succinic Dehydrogenase

        互联网

        776
         

        Materials

         

        • Mitochondrial suspension from Exercise 8.4
        • Sodium dithionite
        • 0.2 M Sorenson Phosphate Buffer, pH 7.5
        • 1% (w/v) Bovine Serum Albumin
        • 0.005 M Potassium Cyanide
        • 0.00025 M Dichlorophenolindophenol
        • 0.6 M Sodium succinate, pH 7.5
        • 0.6 M Sodium malonate, pH 7.5
        • 0.033% (v/v) Phenazine Methosulfate in Phosphate Buffer
        • Spectrophotometer and cuvettes

        Procedure

         

        1. Place 1.0 ml of mitochondrial suspension in a test tube and place in a boiling water bath for 5 minutes. Cool before using. This boiled preparation will allow measurement of background absorption due to the turbidity of the mitochondria when used in a spectrophotometer.

           

        2. Prepare a series of tubes as follows:

           

          <center> <table> <tbody> <tr> <td>  </td> <td> 1</td> <td> 2</td> <td> 3</td> <td> 4</td> </tr> <tr> <td> Phosphate Buffer</td> <td> 2.0 ml</td> <td> 2.0 ml</td> <td> 2.0 ml</td> <td> 1.0 ml</td> </tr> <tr> <td> BSA</td> <td> 0.1 ml</td> <td> 0.1 ml</td> <td> 0.1 ml</td> <td> 0.1 ml</td> </tr> <tr> <td> KCN</td> <td> 1.0 ml</td> <td> 1.0 ml</td> <td> 1.0 ml</td> <td> 1.0 ml</td> </tr> <tr> <td> DCPIP</td> <td> 1.0 ml</td> <td> 1.0 ml</td> <td> 1.0 ml</td> <td> 1.0 ml</td> </tr> <tr> <td> Succinate</td> <td> None</td> <td> 1.0 ml</td> <td> None</td> <td> 1.0 ml</td> </tr> <tr> <td> Malonate</td> <td> None</td> <td> None</td> <td> 1.0 ml</td> <td> 1.0 ml</td> </tr> </tbody> </table> </center>

           

        3. Mix 2 ml of 0.00025 M DCPIP with an amount of sodium dithionite sufficient to fully reduce it. The amount of sodium dithionite is not crucial. Add a small "pinch," shake to dissolve and continue until the color of the DCPIP becomes clear.

           

        4. Use the reduced DCPIP from step 3 to blank a spectrophotometer at 600 nm.

           

        5. Add 1.0 ml of the boiled mitochondrial suspension and 1.0 ml of PMS to tube #1, mix by inversion and immediately place in the previously blanked spectrophotometer. Record the absorbance and continue to record at 30 second intervals for 3 minutes.

           

        6. Add 1.0 ml of the mitochondria suspension to tube #2 and measure the absorbance immediately. Read and record the absorbance every 30 seconds for 6-7 minutes or until no further changes occur.

           

        7. Repeat Step 6 for tube #3.

           

        8. Repeat Step 6 for tube #4.

           

        9. Use a hemacytometer to count the number of mitochondria per ml of suspension used.

           

        10. Calculate the reaction rate for each tube as millimoles of dye reduced/minute/100 mitochondria.
          Convert the absorbance readings to millimoles of dye by using E = 19.1 millimoles for DCPIP @600 nm. Refer to Appendix G for details of the Beer-Lambert law.

           

        11. Record the amount of dye reduced at 30 second intervals. Use linear regression to plot the dye reduction over time for each tube.
        <center> <p>  </p> </center>
        上一篇:Cytochrome Oxidase Manometric Analysis   下一篇:Chlorophyll Content
        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序