• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        Protocol for Silver Staining

        互联网

        2938

        Silver staining is less compatible with the mass spectrometric analysis.Therefore,we don't recommend using silver staining for any samples that will subsequently be submitted for MS analysis.If you can not visualize bands with coomasie and you are not able to scale up your isolation of protein to reach coomasie stainable levels,you must use a mass spec compatible silver stain protocol.

        You must only use methanol and acetic acid during the fixing step.

        You must not use any solutions containing formaldehyde or glutaraldehyde to fix the gel.

        You should use 1.0 to 1.5mm gels and only stain the gel long enough (usually only a few minutes)to detect the bands of interest.

        You should clean a glass or plastic tray with detergent and rinse it thoroughly.

        You should wear clean,disposable gloves and never touch the gel bands directly.

        The following is a protocol used at the proteomics resource center for Silver staining.If you are using Silver staining kit from Sigma,Invitrogen,or other venders,please follow their specific instructions.

        Fixation

        1)Fix gel in 150 ml 50% methanol+ 5% acetic acid for 20 min.

        2)Wash in 150 ml 50% methanol for 10 min.

        3)Wash in water for 10 min.

        For 1 gel,mix 75 ml methanol,7.5 ml acetic acid,and 67.5 ml water.

        Sensitizing

        4)Incubate with 150 ml 0,02% sodium thiosulfate for 1 min.

        5)Rinse with water for 1 min.2X.

        0.02% Sodium Thiosulfate: For 1 gel,add 30mg sodium thiosulfate-5 hydrate to 150ml water.

        Silver reaction

        6)Submerge gel in 150ml 0.1% silver nitrate with 0.08% formalin (37%)for 20 min.

        7)Rinse with water for 1 min.2X.

        0.1% Silver Nitrate and 0.08% Formalin (37%): For 1 gel,add 150 mg silver nitrate and 120μl 37% formalin to 150ml water.

        Developing: Must make fresh solution

        8)Incubate with 150ml 2% sodium carbonate with 0.04% formalin (37%)until desired intensity of staining occurs.If developer turns yellow,which it often does within 30 sec,then discard and replace with fresh 150ml developer.

        2% sodium carbonate+ 0.04% Formalin: For 1 gel,add 6g sodium carbonate to 300ml water.Just prior to use,add 120μl 37% Formaldehyde to the 300ml.

        Stopping

        9)Wash gel in 150ml 5% acetic acid for 10 min.

        5% acetic acid: For 1 gel,add 7.5 ml acetic acid to 150ml water.

        Washing

        10)Wash gel in water for 5 min.

        Permanent Storage

        11)Incubate gel in 150ml preserving solution for 20min.

        Preserving solution: For 1 gel,add 13.2ml glycerol (100% w/w)to 150 ml water.

        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序