相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 库存:
65
- 保质期:
12个月
- 供应商:
北京百奥莱博科技有限公司
- 保存条件:
2~8℃
- 规格:
100ml|500ml
特别提示:包括多聚jiǎ醛溶液(4% PFA)在内,本公司的所有产品仅可用于科研实验,严禁用于临床医疗及其他非科研用途!
产品名称:多聚jiǎ醛溶液(4% PFA)
产品货号:Y12819
产品规格:100ml|500ml
介绍:主要由4%多聚jiǎ醛、磷酸盐组成,pH值为7.4。
储存条件:2~8℃,12个月
用途:组织和细胞常用的固定液
我公司销售的多聚jiǎ醛溶液(4% PFA)质量上佳,价格普惠,欢迎广大新老客户踊跃订购。
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验In Vitro Measurement of High-Shear Platelet Adhesion and Aggregation by the PFA-100
into a commercially available instrument called the platelet function analyzer, or PFA-100� (3 ,4 ). Compared to most platelet function tests the PFA-100 is simple and rapid, and requires less training. However, as with other laboratory tests of platelet function
Nature!中美学者共同破译粘附类 GPCR 自激活机制之谜
参考文献: 1. Qu, X., Qiu, N., Wang, M. et al. Structural basis of tethered agonism of the adhesion GPCRs ADGRD1 and ADGRF1. Nature (2022). https://doi.org/10.1038/s41586-022-04580-w 2. Ping, YQ., Xiao, P., Yang, F. et al. Structural basis for the tethered
剂,以供读者选用。1、4%多聚甲醛-0.1mol/L磷酸缓冲液(pH7.3)多聚甲醛 40g0.1mol/L磷酸缓冲液至1000ml配制方法:称取40g多聚甲醛,置于三角烧瓶中,加入500~800ml 0.1mol/L磷酸缓冲液(Phosphate Buffer以下简称PB),加热至60℃左右,持续搅拌(或磁力搅拌)使粉末完全溶解,通常需滴加少许1N NaOH才能使溶液清亮,最后补足0.1mol/L的PB于1000ml,充分混匀。该固定剂较适于光镜免疫细胞化学研究,最好是动物经灌注固定取材后,继续
技术资料暂无技术资料 索取技术资料









