大家都在搜
手机验证
20
Capillary Cartridge Coolant
上海恪敏生物科技有限公司
室温
450ml
Beckman货号 | 产品名称 | 说明介绍 |
359976 | Capillary Coolant(毛细管冷却液)450 mL | 贝克曼Beckman毛细管冷冻剂、毛细管冷却剂 Coolant for Capillary Cartridge, 450 ml:Recommended for use on the CESI 8000,P/ACE MDQ and PA 800 series systems. |
144390 | Buffer Tray, 2ML, 6X6 | Buffer Tray, 2ML, 6X6 |
144430 | Filter, 200 nm滤光片 | FILTER, 200NM:A replacement filter for use with UV detection |
144431 | Filter, 210 nm滤光片 | SCD, FILTER, 210NM:A custom application filter that can be installed by the customer |
144432 | Filter, 220 nm滤光片 | FILTER, 220NM:A custom application filter that can be installed by the customer |
144433 | Filter, 230 nm滤光片 | FILTER, 230NM:A custom application filter that can be installed by the customer |
144434 | Filter, 260 nm滤光片 | SCD, FILTER 260NM:A custom application filter that can be installed by the customer |
144435 | Filter, 300 nm滤光片 | FILTER, 300NM:A custom application filter that can be installed by the customer |
144436 | Filter, 340 nm滤光片 | Filter, 340 nm滤光片 |
144437 | Filter, 214 nm滤光片 | Filter, 214 nm滤光片 |
144438 | Filter, 254 nm滤光片 | Filter, 254 nm滤光片 |
144439 | Filter, 280 nm滤光片 | Filter, 280 nm滤光片 |
144543 | Sample Tray 48 Position 2ML Vial | Sample Tray 48 Position 2ML Vial |
144544 | Sample Tray 48 Position 0.5ML Vial | Sample Tray 48 Position 0.5ML Vial |
144645 | Cartridge Rebuild Kit(滤筒重置试剂盒) | Cartridge Rebuild Kit Includes: • Cleaving stone • Capillary length tool • O-ring Installation tool • O-ring Aperture (pkg of 100) • Tweezers (plastic) • Installation Rebuild kit |
144647 | Coolant Fill Kit(冷却剂充填箱) | Coolant Fill Kit Includes: • Syringe • Coolant fill tool • Connecting tubing |
144648 | Cap, Vial 2ML, 100 Pcs(2ml样品瓶盖) | Used to seal 2-mL reagent vials, part number 144980 |
144649 | Cap, Vial 0.5ML, 50 Pcs(0.5ml样品瓶盖) | Cap, Vial 0.5ML, 50 Pcs |
144656 | Gray vial cap (pkg of 50),样品瓶盖 | Cap, Vial-PCR, Package of 50 |
144657 | Vial Holder (pkg of 50),瓶架 | Required for use of MicroVials (qty. 50) |
144672 | Kit, Electrode Replacement(电极替换盒) | 2 screws, 20 rings, 2-pt wires. |
144689 | Cartridge Tubing Kit | Consists of 20-, 30-, 40-, and 50 cm lengths of cartridge coolant tubing and all connectors |
144709 | PCR Vial, Micro, 200 μL(pkg of 100) 200ul毛细管微量瓶 |
Microvials can be used as vial inserts for small volume sample introduction into the CESI 8000, PA 800 series and P/ACE MDQ systems. Microvials fit into universal vials |
144711 | Aperture, 100 x 800 μm(pkg of 3) | UV and PDA Aperture, 100 x 800 μm. |
144712 | Aperture, 100 x 200 μm(pkg of 3) | UV and PDA Aperture, 100 x 200 μm |
144717 | Cartridge Coolant Tube Kit,100 cm | Includes: • Cartridge coolant tubing (100 cm total length) • Tubing-molded nuts (qty 2) • Ferrule (qty 2) • O-ring (qty 2) |
144738 | Cartridge Assembly Kit,Blank(毛细管卡盒) | Includes: • Cartridge body • 100 x 800 μm aperture • 100 x 200 μm aperture • Tubing kit • Nuts • Ferrules • O-rings |
144824 | Buffer Reservoir Access Kit | Two large-volume buffer reservoirs, four buffer reservoir lids, and buffer reservoir removal tool |
144826 | Lid Assembly, Buffer Reservoir Tray | Lid Assembly, Buffer Reservoir Tray |
144829 | External Detector Adapter Cartridge and Adapter Kit | Cartridge Assembly, EDA Pack ,New EDA cartridge with all tubing, clips, seals, etc., and the adapter couplings.Cartridge is detector bypass type |
144834 | Tubing Kit, External Detector Adapter | Includes: • Precut External Detector Adapter tubing • Nuts • O-rings • Ferrules |
144858 | Buffer Reservoir Lid Removal Tool | Buffer Reservoir Lid Removal Tool |
144865 | O-Ring, Buffer Reservoir,Replacement (pkg of 4) | Buffer reservoir replacement O-rings |
144866 | Double Seals with Clips(pkg of 4) | Replacement red cartridge seals for sealing around capillary ends.Suitable for 150-375 μm OD capillaries and all cartridge types |
144873 | Single Seals with Clips(pkg of 4) | Seals around optics window of capillary cartridge |
144940 | Filter, Emission Band Pass,520 nm滤光片 | A replacement filter for use with Laser Induced Fluorescence (LIF)detection. Used on CESI 8000, P/ACE MDQ and PA 800 series systems equipped with LIF |
144941 | Filter, Notch, 488 nm滤光片 | A replacement filter for use with Laser Induced Fluorescence (LIF)detection. Used on CESI 8000, P/ACE MDQ and PA 800 series systems equipped with LIF |
144942 | Filter, Emission Band Pass,655 nm滤光片 | A replacement filter for use with Laser Induced Fluorescence (LIF)detection. Used on CESI 8000, P/ACE MDQ and PA 800 series systems equipped with LIF |
144980 | Vial, Glass 425THD/100,2ml样品瓶 | 2-mL reagent vials,Reagent vials used for buffers and cleaning solutions |
149044 | Blank Cartridge CE/MS Kit | Organic solvent-resistant capillary cartridges for use with the PA 800 series and P/ACE MDQ instruments |
149053 | Traditional CE-MS Interface Capillary - 70 μm ID, 115cm total length, 100 cm to the window (qty 3) 传统CE-MS界面毛细管(70um内径,115cm长) |
115 cm capillary for use when interfacing Beckman Coulter’s CE systems with mass spectrometers |
149068 | Filter, Emission Band Pass,560 nm滤光片 | A replacement filter for use with Laser Induced Fluorescence (LIF)detection. Used on CESI 8000, P/ACE MDQ and PA 800 series systems equipped with LIF |
285441 | GeXP (One Rail) SEQ START-UP-PAC | Recommended reagents for installation, operational qualification (OQ1) and training in DNA sequencing, on the GeXP single rail. Includes: 2 Quick Start DTCS Kits, 4 x 10 mL LPA Gel cartridges, 1 Separation Buffer 4-packs, 2 Capillary Array Kits (33 cm), 1 Sequencing Reaction. Size Standards-600, Fragment Analysis Test Sample, 1 x 6.0 mL Sample Loading Solution, Test Sample, 1 package Sample Microtiter Plates (qty.25), 1 package 96-Well PS Nonsterile Plates (qty. 100). |
285489 | GeXP (One Rail) FA START-UP-PAC | Recommended reagents for installation, operational qualification (OQ1), and training in DNA fragmen analysis and genotyping application on the GeXP single rail. Includes: 4 x 10 mL LPA Gel cartridges, 1 Separation Buffer 4-pack, 2 Capillary Arrays (33 cm), 2 Size Standards-400, 2 Size Standards-600, 4 x 6.0 mL Sample Loading Solution, FA Test Sample, Sequencing Test Sample, 1 package Sample Microtiter Plates (qty. 25), 1 package 96-Well PS Nonsterile Plates (qty. 100) |
338424 | Regenerator Solution A,Capillary, 0.1N NaOH (碱性冲洗液) |
Capillary Regenerator Solution A,0.1 N sodium hydroxide (50 mL). |
338426 | Capillary Performance Run Buffer A, 100 mM Sodium Borate, pH 8.3 | Component of Capillary Performance Test Kit |
338437 | Test Kit, Capillary Performance(毛细管性能测试盒) | Includes: • Capillary Regenerator Solution A • Performance Test Mix B • Capillary Performance Run Buffer A • Instructions |
338451 | Bare Fused-Silica Capillary - 50μm ID,375μm OD,67cm (pkg of 3) 未涂熔融石英毛细管(50um内径,375um外径,67cm长*3) |
Capillary for use in PA 800 series and P/ACE MDQ Capillary Cartridges for separation and analysis of a variety of samples, including pharmaceuticals, industrial chemicals, chiral drugs, nucleic acids, amino acids, proteins, and peptides. Capillaries must be trimmed to optimize speed/resolution.Bare fused-silica capillary with laser burned window - 50 μm ID, 375 μm OD, 67 cm total length/50 cm effective length |
338454 | Bare Fused-Silica Capillary - 75μm ID,375μm OD,67cm 未涂熔融石英毛细管(75um内径,375um外径,67cm长) |
Bare fused-silica capillary with laser burned window - 75 μm ID, 375 μm OD, 67 cm total length/50 cm effective length |
338472 | Bare Fused-Silica Capillary - 50μm ID,375μm OD,5m length 未涂熔融石英毛细管(50um内径,375um外径,5m长) |
Bare fused-silica capillary 50 micron internal diameter, 375 μm OD, 5 meter length |
338473 | Bare Fused-Silica Capillary - 75μm ID,375μm OD,5m length 未涂熔融石英毛细管(75um内径,375um外径,5m长) |
Bare fused-silica capillary 75 micron internal diameter, 375 μm OD, 5 meter length |
338474 | Bare Fused-Silica Capillary - 100μm ID,375μm OD,5m length 未涂熔融石英毛细管(100um内径,375um外径,5m长) |
Bare fused-silica capillary 100 micron internal diameter, 375 μm OD, 5 meter length |
338475 | Bare Fused-Silica Capillary - 20μm ID,375μm OD,37cm(pkg of 3) 未涂熔融石英毛细管(20um内径,375um外径,37cm长*3根) |
Bare fused-silica capillary with laser burned window - 20 μm ID, 375 μm OD, 37 cm total length/20 cm effective length |
358821 | Micro Vial Spring(PKG-10) 微量瓶弹簧 |
Required for use of MicroVials |
360137 | CLEAVING STONE,PRINTED | CLEAVING STONE,PRINTED |
360800 | CE-MS Capillary - 75 μm ID, 111 cm total length (pkg of 3) CE-MS毛细管(75um内径,111cm长*3根) |
111 cm capillary for use when interfacing Beckman Coulter’s CE systems with mass spectrometers |
360801 | Traditional CE-MS Interface Capillary - 50 μm ID, 111 cm total length (pkg of 3) 传统CE-MS界面毛细管(50um内径,111cm长,3根) |
111 cm capillary for use when interfacing Beckman Coulter’s CE systems with mass spectrometers |
360804 | ECAP CAPILLARY TUBING,5m in length,20um ID,375um OD 毛细管(20um内径,5m长) |
ECAP CAPILLARY TUBING 5M X 20UM, 5 meters in length, 20 µm ID, 375 µm OD |
390904 | CEQ-8800 BUFFER EVAPORATION COVER CEQ-8800 缓冲蒸发罩 |
CEQ-8800 BUFFER EVAPORATION COVER CEQ-8800 缓冲蒸发罩 |
390953 | SDS-Gel MW Analysis Kit 蛋白分子量分析试剂盒 |
The SDS-MW Analysis Kit is designed for the sizing of protein-SDS complexes separated in a replaceable gel matrix. The gel is formulated to provide an effective protein sieving range of approximately 10 kDa to 225 kDa. Within this size range, the logarithm of protein molecular mass is linear with its reciprocal electrophoretic mobility, allowing the molecular weight of an unknown protein to be estimated from a standard curve of known protein sizes. This chemistry can also be used to quantify protein concentration and to determine the purity of a protein product. Includes: • Separation Capillary, 57 cm x 50 μm ID bare fused-silica, qty 2 • SDS Gel Separation Buffer, 140 mL • SDS Sample Buffer, 100 mM Tris-HCl, pH 9.0/1% SDS, 50 mL • SDS Protein Sizing Standard (10 to 225 kDa) 16 mg/mL, 100 μL • Internal Standard, 10 kDa protein, 5 mg/mL, 0.4 mL • Acidic Wash Solution, 0.1 N HCl, 100 mL • Basic Wash Solution, 0.1 N NaOH, 100 mL |
391438 | Separation Gel - LPAI 20 mL | High-resolution polyacrylamide gel packaged in a premixed cartridge. One 20 mL cartridge is Storage |
391734 | IgG Control Standard,(pkg of 3)(低温) IgG控制标准品 |
The IgG Control Standard allows for experimental control when separating reduced or non-reduced IgG |
391809 | IgG控制标准品(IgG 纯度/异质分析盒组分之一) | IgG控制标准品(IgG 纯度/异质分析盒组分之一) |
477409 | LIFLUOR DSDNA 1000 Enhance | LIFLUOR DSDNA 1000 Enhance |
477410 | SLGP,DSDNA 1000 KIT | Reorder Components: 477477 DNA CAPILLARY 477628 DS DNA 1000 GEL (KIT) 241524 ECAP SDS REFERENCE STANDARD 477414 ECAP DSDNA 1000 TEST MIX |
477414 | ECAP DSDNA 1000 TEST MIX | Fluorescence Intercalator Dye For use with dsDNA 1000 and dsDNA 20,000 kits and LIF detection. Requires 488-nm Argon laser and 520-nm emission filter. |
477422 | eCAP Phosphate Buffer 50.0 mM, pH 2.5, 100mL | eCAP Phosphate Buffer 50.0 mM, pH 2.5, 100mL |
477427 | eCAP Tris Buffer, 50.0 mM, pH 8.0, 100 mL | eCAP Tris Buffer, 50.0 mM, pH 8.0, 100 mL |
477431 | eCAP Amine Capillary, 50 μm ID, 65 cm Total Length eCAP Amine毛细管(50um内径,65cm长) |
Amine capillary with laser burned window - eCAP, 50 μm ID, 65 cm Total Length |
477445 | Protein Methods Development Kit 蛋白方法开发试剂盒 |
The Protein Methods Development Chemistries contain coated capillaries,buffers,standards,and markers to allow you to optimize a separation method for the analysis of a broad spectrum of proteins by their mass/charge characteristics. The use of a “Neutral” separation capillary minimizes the adsorption of proteins to the capillary surface and protects against hydrophobic interactions with the surface, improving the overall efficiency and resolution of the proteins being separated. For proteins that require minimal Electroosmotic Flow (EOF) and a neutral capillary surface. Includes: • Neutral Capillary, 50 μm • Orange G Reference Marker, 0.1% aqueous solution, 1 mL • Histamine Reference Marker, 1% aqueous solution, 1 mL • Citrate Buffer, pH 3, 50 mM, 100 mL • Citrate/MES Buffer, pH 6, 50 mM, 100 mL • Tricine Buffer, pH 8, 50 mM, 100 mL • Protein Test Mix : Lyzozyme, 1 mg, Ribonuclease A, 1 mg, Cytochrome C, 3 mg |
477477 | eCAP DNA Capillary,100μm ID,65cm Total Length eCAP DNA毛细管(100um内径,65cm长) |
Capillary with laser burned window - 100 μm ID, 65 cm total length |
477480 | SSDNA KIT, 100R | Reorder Components: 477477 DNA CAPILLARY 477621 SSDNA Kit, 100R Gel 477626 PD(A) KIT, 40-60 338481 ECAP U100P GEL BUFFER KIT |
477490 | ECAP CIEF 3-10 KIT | ECAP CIEF 3-10 KIT |
477497 | CIEF GEL-cIEF凝胶 (100 mL)(cIEF Gel Polymer solution) | Separation Buffer for performing capillary Isoelectric Focusing (100 mL) |
477600 | Carbohydrate Labeling and Analysis Kit 糖类标记分析试剂盒 |
The PA 800 plus Carbohydrate Labeling and Analysis Chemistry contains the reagents and separation capillary required to label, separate and quantify oligosaccharides and monosaccharides released from glycoproteins. Following release (enzymatic or chemical) from proteins, glycans are labeled with a fluorophore, APTS, at the reducing terminus by reductive amination. The stoichiometry of labeling is such that only one APTS molecule is attached to each molecule of oligosaccharide. These highly charged and fluorescent oligosaccharides are easily resolved in an electric field and detected using laser-induced fluorescence. Includes: • Carbohydrate Separation Buffer, 56 mL (Part Number 477623) • N-CHO Coated Capillary, qty 2 (Part Number 477601) • Labeling Reagents –Labeling Dye (APTS), 4 x 5 mg –Labeling Dye Solvent, 1 mL (Part Number 501309) –Glucose Ladder Standard, 50 mg –Quantitation/Mobility Marker (Maltose), 0.18 mg • APTS-M (APTS extra purified for monosaccharide labeling) • Carbohydrate Labeling and Analysis Guide |
477601 | N-CHO Capillary, for N-Linked Oligosaccharide Profiling N-联糖分析用涂层毛细管,50um内径,65cm总长度 |
This capillary is used with the Carbohydrate Labeling and Analysis Kit (Part number 477600). Capillaries must be trimmed to optimize speed/resolution. N-CHO (PVA) Capillary with laser burned window - 50 μm ID x 65 cm total length. |
477621 | ssDNA 100-R Gel Kit | ssDNA 100-R Gel Kit |
477623 | Carbohydrate Separation Buffer(N-LINKED GEL Buffer) | Carbohydrate Separation Buffer(N-LINKED GEL BUFFER) for use in Carbohydrate Labeling and Analysis Assay. Also included in Carbohydrate Labeling and Analysis Kit (Part number 477600). |
477628 | Gel Kit, eCAP dsDNA 1000 (pkg of 3) | For DNA fragment pattern recognition, quantitation of PCR fragments, and molecular sizing determinations. Typical resolution for fragments less than 400 base pairs is 5-15. Molecular size linearity from 100 to 1,000 base pairs. The dsDNA 1000 gel can also be used for high resolution oligosaccharide separation in combination with the Carbohydrate Separation Buffer (Part Number 477623). For details, see Application Note A-13376A “Separation of Fucosylated and non-Fucosylated Carbohydrates Associated with Monoclonal Antibodies using Capillary Electrophoresis” |
501309 | APTS Labeling Dye,2 x 5 mg | 8-Aminopyrene-1,3,6-Trisulfonic Acid (APTS). Labeling dye used in Carbohydrate Labeling and Analysis Assay. |
501310 | P/ACE MDQ Methods Development Kit | The P/ACE MDQ Methods Development Kit is designed to provide a starting point for the development of capillary zone electrophoresis analysis complex proteins, pharmaceuticals, or basic analytes. The kit includes both neutral (polyacrylamide-based) and amine-coated capillaries. Benzyl alcohol is included as a neutral EOF marker for the amine capillary, while histamine is used as a reference marker for the neutral capillary. Includes: Amine Capillary A Neutral Capillary 20 mM citrate/MES Buffer, pH 6.0 50 mM Tris Buffer, pH 8.0 Small Molecule Test Mix Protein Test Mix Histamine Reference Marker Neutral Marker Amine Regenerator Solution |
501333 | Performance Test Mix B | Performance Test Mix. Component of Capillary Performance Test Kit. |
5043467 | nanoVial (pkg 100) | The nanoVial is a small sample volume vial precision manufactured from polymethylpentene and allow hydrodynamic or electrokinetic introduction of material from as little as 5 ml of sample. nanoVials are designed for single use only and should not be reused. For MDQ Plus use select universal caps |
607445 | WETTING TRAY - RETAINER VERSION | WETTING TRAY - RETAINER VERSION |
607533 | EVAPORATION CONTROL MAT | EVAPORATION CONTROL MAT |
607778 | DUAL RS-232 TEST CABLE | DUAL RS-232 TEST CABLE |
608000 | Methods Development Kit | Dye-labeled dideoxy terminator cycle sequencing kit for 96 reactions. Includes: thermostable ddATP); dNTP (I) mix; dNTP(G) mix; Sequencing Reaction Buffer; pUC18 control template; M13-47 sequencing primer; Mineral Oil; Glycogen; Sample Loading Solution (SLS) |
608010 | Separation Gel - LPAI 10 mL | High-resolution polyacrylamide gel packaged in a premixed cartridge. One 10 mL cartridge is sufficient for 96 sequencing or fragment analysis runs |
608012 | GenomeLab Separation Buffer, 4/pk | Each container has a screw top and a convenient pour tip and contains sufficient buffer (30 mL) to fill one Buffer Plate of 96 flat-bottom wells. |
608070 | Sequencing Test Sample | Sequencing reaction products test sample in vials. Sufficient for 24 runs on the CEQ and GeXP |
608074 | Seq Reaction Buffer Kit | Eight capillaries, 75 µm i.d., 33 cm long, complete with inlet electrode block and detector array fitting. Ready for easy installation into the CEQ™ and GeXP for sequencing and/or fragment analysis |
608082 | Sample Loading Solution 6.0 mL | Sample Loading Solution 6.0 mL |
608087 | DNA Sep Cap Array 33-75B | Eight capillaries, 75 µm i.d., 33 cm long, complete with inlet electrode block and detector array fitting. Ready for easy installation into the CEQ and GeXP for sequencing and/or fragment analysis |
608095 | DNA Size Standard Kit 600BP | DNA size standard for analysis of fragments up to 600 nucleotides. Includes mineral oil. Sufficient for 9 fragment analysis separations. Includes DNA fragments of the following sizes labeled with WellRED fluorescent dye: 60, 70, 80, 90, 100, 120, 140, 160, 180, 190, 200, 220, 240,260, 280, 300, 320, 340, 360, 380, 400, 420, 440, 460, 480, 500, 520, 540, 560, 580, 600, 620, and 640 nucleotides |
608098 | DNA Size Standard Kit 400BP | DNA size standard for analysis of fragments up to 400 nucleotides. Includes mineral oil. Sufficient for 96 fragment analysis separations. Includes DNA fragments of the following sizes labeled with WellRED fluorescent dye: 60, 70, 80, 90, 100, 120, 140, 160, 180, 190, 200, 220, 240, 260, 280, 300, 320, 340, 360, 380, 400, and 420 nucleotides |
608105 | Fragment Analysis Test Sample | A set of fluorescently labeled DNA fragments of known sizes and defined spacing used to verify the resolution power of the CEQ and GeXP fragment analysis system. Sufficient for 24 tests |
608120 | DTCS QUICK START KIT | Dye-labeled dideoxy terminator cycle sequencing kit for 96 reactions. Includes: a single tube Quick Start Master Mix containing thermostable DNA polymerase and pyrophosphotase, CEQ WellRED dye-labeled terminators (ddUTP, ddGTP, ddCTP, ddATP), dNTPs in sequencing reaction buffer; Sample Loading Solution (SLS); pUC18 control template; -47 sequencing primer; mineral oil and glycogen |
608145 | D4- PA KIT 0.1G | D4- PA KIT 0.1G |
608146 | D3- PA KIT 0.1G | D3- PA KIT 0.1G |
608147 | D2- PA KIT 0.1G | D2- PA KIT 0.1G |
608395 | DNA Size Standard Kit 80BP | DNA size standard for analysis of fragments up to 80 nucleotides. Includes mineral oil. Sufficient for 96 fragment analysis separations. Includes WellRED fluorescent dye labeled DNA fragments size standards ideal for performing SNP validation and scoring |
609801 | SAMPLE MICROTITER PLATE 25 PK | Package of 25 V-bottom thermal cycler-compatible polypropylene plates with 200 µL nominal volume to easily contain 40 µL of sample. Recommended for use as the sample plate. Capacity: 300 µL/well (package of 100). Four packages of 25 each flat-bottom polystyrene plates. Recommended for use as the Separation Buffer Plate |
609844 | 96-WELL PLATES, PS NONSTERILE (100) | Capacity: 300 µL/well (package of 100). Four packages of 25 each flat-bottom polystyrene plates. Recommended for use as the Separation Buffer Plate |
713333 | CAPILLARY(毛细管) COND SOL'N | CAPILLARY(毛细管) COND SOL'N |
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。