- 询价
- SPP
- S-IL-110-625-08-W
- 英国
- 2025年07月10日
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 库存：
大量
- 规格：
5L，900Mpa
Vessel Bore：Ø110 mm1
Vessel loading basket internal bore：Ø105 mm1
Vessel Length：625mm1
Vessel loading basket internal length：590mm1
Working fluid：Propylene Glycol water2
Max. Working Pressure：800 MPa
Vessel Construction：Mantle barrel, breech closure/ compound barrel
Operating Temperature Range：-20°C +130°C
Heating SystemCirculated fluid
Cooling systemCirculated fluid (not included, optionally available)
Closure Handling：Hydraulically Assisted breech, high lift type
Priming Pumping System：Stansted 085W-01 Converter
HP Pumping System：Hydraulically driven intensifier
Time to pressure： minimum90s3
Variable rate100s to 600s
Dwell at Pressure：0.1 sec.~ 999 minutes
Repeat Cycles：0-10
Decompression System：4stage, fully automatic
Pressure Measurement：Strain Gauge Transducer
Pressure Indicator/Controller：Digital with electronic control
Temperature measurement：'T' Type thermocouple,Probe PositionAdjustable in work zone
Additional Telemetry3 penetrations (thermocouple/signal wires/electrodes)
Temperature indicator：Digital
Depressurisation rate：Adjustable
Product Basket：Supplied
Heating system：Hot fluid circulation
Suitable for heating vessel：from ambient to +110°C
Cooling system：Suitable for cooling vessel from ambient to - 20°C (Optional)
Control Logic：PLC linked to PC
PLCMitsubishi Fx
PCPentium
SCADA packageHEXATECH SCAN 1000 customised to system
SCADA functionProcess set up: pressures, temperatures, ramps, and
dwells Graphic interface with process data displayed,Alarm warnings,
Pressure, & temperature Vs time graphic (and output plot)
Control Console Positioning：0m to 10m from press module
Floor Area Press：1.25m x 1.25m
Floor Area Console：1.2m x 0.8m
Floor Area auxiliaries module：2.5m x 1.5m
System Weight：6500 Kg approx.
System interconnection：Umbilical quick release electrical cables between modules.
Rigid steel connection tube to pressure vessel module
Flexibles with quick release from pressure vessel module
Power Consumption：50 kW approx.
Electrical Supply：380V 50 Hz 3ph N + E (or agreed alternative)
Compressed air：5 barg (75 psig) min 300 Nl (10 scfm) per cycle
Testing： WorksProof Pressure Test / Autofrettage
Functional Performance tests to system specification
Commissioning Functional Performance tests to system specification
Documentation：Test Certificates, CE Certificate,Operation manuals,Maintenance instructions
General Assembly drawings,Spares parts list
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验: a chemical approach for fluorescence imaging andreconstruction of transparentmouse brain.Nature Neurosci. 14, 1481–1488(2011).7. Cheong, W., Prahl, S. & Welch, A. A review of the optical properties of biological tissues. IEEE J. Quant. Electron. 26, 2166–2185
扩增。6. 扩增效率低反应试剂中部分成分特别是荧光染料降解。反应条件不够优化：可适当降低退火温度或改为三步扩增法。反应体系中有PCR反应抑制物：一般是加入模板时所引入，应先把模板适度稀释，再加入反应体系中，减少抑制物的影响。7. 同一试剂在不同仪器上产生不同的曲线，如何判断？判断标准：扩增效率，灵敏度，特异性如果扩增效率在90%-110%，都是特异性扩增，都可以把数据用于分析。8. 扩增曲线的异常？比如“S”型曲线？参比染料设定不正确(MasterMix不加参比染料时，选NONE)模板的浓度
。 ■ 蚯蚓血红蛋白（Karlsen 2005）——酶切后，用分子筛分离纯化蚯蚓血红蛋白，纯化后的蛋白通过圆二色谱检测得到的α-螺旋结构与模型预期结果一致，且纯化后的蛋白可以以单体的形式稳定保存。 ■ 人白介素-29（Li 2006）——用S-蛋白亲和层析比Ni2+亲和层析可以得到更纯的目的蛋白。将融合蛋白N端的NusA/His•Tag®/S•Tag™标签切掉后，用链亲和素琼脂去除生物素标记的凝血酶。用水疱性口膜炎病毒（VSV）处理固定的人羊膜上皮细胞（WISH 细胞）后，通过检测纯化
技术资料暂无技术资料 索取技术资料
