- ￥221 - 3790
- TargetMol
- 美国
- T6996
- 2025年07月08日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件：
零下80~20°C
- 保质期：
Powder: -20°C for 3 years In solvent: -80°C for 2 years
- 英文名：
SU 5402
- 库存：
10
- 供应商：
TargetMol
- CAS号：
215543-92-3
- 规格：
25 mg/10 mg/1 mL/5 mg/100 mg/1 mg/50 mg
| 规格： | 25 mg | 产品价格： | ￥1330.0 |
|---|---|---|---|
| 规格： | 10 mg | 产品价格： | ￥663.0 |
| 规格： | 1 mL | 产品价格： | ￥543.0 |
| 规格： | 5 mg | 产品价格： | ￥493.0 |
| 规格： | 100 mg | 产品价格： | ￥3790.0 |
| 规格： | 1 mg | 产品价格： | ￥221.0 |
| 规格： | 50 mg | 产品价格： | ￥2560.0 |
Product Introduction
Bioactivity
英文名:SU 5402
描述:SU 5402 is a potent multi-targeted receptor tyrosine kinase inhibitor with IC50 of 20 nM, 30 nM, and 510 nM for VEGFR2, FGFR1, and PDGF-Rβ, respectively.
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验with FGF signaling by treating embryos with SU5402 (Calbiochem), a FGF receptor inhibitor. We observed craniofacial deformities and delayed maturation in embryos treated with SU5402. this indicates that FGF signaling is required for cranifacial formation
Fabrication of Polydimethylsiloxane Microfluidics Using SU-8 Molds
We detail the widely prevalent technique of polydimethylsiloxane (PDMS) molding using SU-8 for creating microfluidic chambers and channels. Although other techniques such as injection molding are more apt for mass manufacturing and cost
Rapid Prototyping of PDMS Devices Using SU-8 Lithography
This protocol describes the fabrication of single and multi-layer SU-8 microstructures for generating microfluidic devices via PDMS (polymethyldisiloxane) casting. SU-8 is a negative, thick-film, epoxy based photoresist
技术资料暂无技术资料 索取技术资料
