- ￥3200
- wksubio
- 可以定制
- china
- ABE11183
- 2026年06月26日
13 年金牌会员
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
相关阅读
源叶生物 十万种现货试剂速发，品质稳、品类全，实验不再等！Takara 秋促来袭，提取+反转录+定量套装仅 1200 元abinScience 体内级抗体 全年锁价 低至 ￥1200阿拉丁 22万+ 科研级产品现货速发，品质严控、科研无忧- 详细信息
- 文献和实验
- 技术资料
- 适应物种：
不限
- 库存：
不限
- 供应商：
瓦兰生物
- 检测范围：
可以定制
- 检测方法：
酶联免疫法
- 应用：
科研单位
- 标记物：
PPIL1
- 样本：
液体
- 规格：
96t
中文：人肽酰脯氨酰异构酶(亲环蛋白)样1(PPIL1)ELISA Kit
英文：Human peptidylprolyl isomerase(cyclophilin)-like 1,PPIL1 ELISA Kit
货号:ABE11183
试剂盒组成
注：标准品浓度依次为：8、4、2、1、0.5、0 ng/ml.
试剂的准备
20×洗涤缓冲液的稀释：蒸馏水按1：20稀释，即1份的20×洗涤缓冲液加19份的蒸馏水。
洗板方法
绘制标准曲线：在Excel工作表中，以标准品浓度作横坐标，对应OD值作纵坐标，绘制出标准品线性回归曲线，按曲线方程计算各样本浓度值。
试剂盒性能
英文：Human peptidylprolyl isomerase(cyclophilin)-like 1,PPIL1 ELISA Kit
货号:ABE11183
试剂盒组成
| 名称 | 96孔配置 | 48孔配置 | 备注 |
| 微孔酶标板 | 12孔×8条 | 12孔×4条 | 无 |
| 标准品 | 0.3mL | 0.3mL | 无 |
| 样本稀释液 | 6mL | 3mL | 无 |
| 检测抗体-HRP | 10mL | 5mL | 无 |
| 20×洗涤缓冲液 | 25mL | 15mL | 按说明书进行稀释 |
| 底物A | 6mL | 3mL | 无 |
| 底物B | 6mL | 3mL | 无 |
| 终止液 | 6mL | 3mL | 无 |
| 封板膜 | 2张 | 2张 | 无 |
| 说明书 | 1份 | 1份 | 无 |
| 自封袋 | 1个 | 1个 | 无 |
试剂的准备
20×洗涤缓冲液的稀释：蒸馏水按1：20稀释，即1份的20×洗涤缓冲液加19份的蒸馏水。
洗板方法
- 手工洗板：甩尽孔内液体，每孔加满洗涤液，静置1min后甩尽孔内液体，在吸水纸上拍干，如此洗板5次。
- 自动洗板机：每孔注入洗液350μL，浸泡1min，洗板5次。
- 从室温平衡60min后的铝箔袋中取出所需板条，剩余板条用自封袋密封放回4℃。
- 设置标准品孔和样本孔，标准品孔各加不同浓度的标准品50μL；
- 待测样本孔先加待测样本10μL，再加样本稀释液40μL；
- 随后标准品孔和样本孔中每孔加入辣根过氧化物酶（HRP）标记的检测抗体100μL，用封板膜封住反应孔，37℃水浴锅或恒温箱温育60min。
- 弃去液体，吸水纸上拍干，每孔加满洗涤液，静置1min，甩去洗涤液，吸水纸上拍干，如此重复洗板5次（也可用洗板机洗板）。
- 每孔加入底物A、B各50μL，37℃避光孵育15min。
- 每孔加入终止液50μL，15min内，在450nm波长处测定各孔的OD值。
绘制标准曲线：在Excel工作表中，以标准品浓度作横坐标，对应OD值作纵坐标，绘制出标准品线性回归曲线，按曲线方程计算各样本浓度值。
试剂盒性能
- 准确性：标准品线性回归与预期浓度相关系数R值，大于等于0.9900。
- 灵敏度：最低检测浓度小于0.1 ng/ml。
- 特异性：不与其它可溶性结构类似物交叉反应。
- 重复性：板内变异系数小于10%、板间变异系数小于15%。
- 贮藏：2-8℃，避光防潮保存。
- 有效期：6个月
- 试剂盒仅供研究使用，不得用于临床实验或人体实验，否则所产生的一切后果，由实验者承担，本公司概不负责。
- 严格按照说明书操作，实验者违反说明书操作，后果由实验者承担。
Sample collection and storages
Serum - Use a serum separator tube and allow samples to clot for 30 minutes before centrifugation for 10 minutes at approximately 3000×g. Remove serum and assay immediately or aliquot and store samples at -20℃ or -80℃.Avoid repeated freeze-thaw cycles
Plasma - Collect plasma using EDTA or heparin as an anticoagulant. Centrifuge samples for 30 minutes at 3000×g at 2-8℃ within 30 minutes of collection. Store samples at -20℃or -80℃. Avoid repeated freeze-thaw cycles.
Cell culture supernates and other biological fluids - Remove particulates by centrifugation and assay immediately or aliquot and store samples at -20℃or -80℃. Avoid repeated freeze-thaw cycles.
Note: The samples should be centrifugated adequately and no hemolysis or granule was allowed.
Materials required but not supplied
1. Standard microplate reader(450nm)
2. Precision pipettes and Disposable pipette tips.
3. 37 ℃ incubator
Precautions
1. Do not substitute reagents from one kit to another. Standard, conjugate and microplates are matched for optimal performance. Use only the reagents supplied by manufacturer.
2. Do not remove microplate from the storage bag until needed. Unused strips should be stored at 2-8°C in their pouch with the desiccant provided.
3. Mix all reagents before using.
Remove all kit reagents from refrigerator and allow them to reach room temperature ( 20-25°C)
Materials supplied
Note: Standard concentration was followed by:Name 96 determinations 48 determinations Microelisa stripplate 12*8strips 12*4strips Standard 0.3ml 0.3ml Sample diluent 6.0ml 3.0ml HRP-Conjugate reagent 10.0ml 5.0ml 20X Wash solution 25ml 15ml Chromogen Solution A 6.0ml 3.0ml Chromogen Solution B 6.0ml 3.0ml Stop Solution 6.0ml 3.0ml Closure plate membrane 2 2 User manual 1 1 Sealed bags 1 1
20、10、5、2.5、1.25、0 ng/mL.
Reagent preparation
20×wash solution:Dilute with Distilled or deionized water 1:20.
Assay procedure
1. Prepare all reagents before starting assay procedure. It is recommended that all Standards and Samples be added in duplicate to the Microelisa Stripplate.
2. Add standard: Set Standard wells, testing sample wells. Add standard 50μl to standard well.
3. Add Sample: Add testing sample 10μl Then add sample diluent 40μl to testing sample well; Blank well doesn’t add anyting.
4. Add 100μl of HRP-conjugate reagent to each well, cover with an adhesive strip and incubate for 60 minutes at 37°C.
5. Aspirate each well and wash, repeating the process four times for a total of five washes. Wash by filling each well with Wash Solution (400μl) using a squirt bottle, manifold dispenser or autowasher. Complete removal of liquid at each step is essential to good performance. After the last wash, remove any remaining Wash Solution by aspirating or decanting. Invert the plate and blot it against clean paper towels.
6. Add chromogen solution A 50μl and chromogen solution B 50μl to each well. Gently mix and incubate for 15 minutes at 37°C. Protect from light.
7. Add 50μl Stop Solution to each well. The color in the wells should change from blue to yellow. If the color in the wells is green or the color change does not
appear uniform, gently tap the plate to ensure thorough mixing.
8. Read the Optical Density (O.D.) at 450 nm using a microtiter plate reader within 15 minutes.
Calculation of results - This standard curve is used to determine the amount in an unknown sample. The standard curve is generated by plotting the average O.D. (450 nm) obtained for each of the six standard concentrations on the vertical (Y) axis versus the corresponding concentration on the horizontal (X) axis.
- First, calculate the mean O.D. value for each standard and sample. All O.D. values, are subtracted by the mean value of the zero standard before result interpretation. Construct the standard curve using graph paper or statistical software.
- To determine the amount in each sample, first locate the O.D. value on the Y-axis and extend a horizontal line to the standard curve. At the point of intersection, draw a vertical line to the X-axis and read the corresponding concentration.
- Any variation in operator, pipetting and washing technique, incubation time or temperature, and kit age can cause variation in result. Each user should obtain their own standard curve.
- The sensitivity by this assay is 0.1 ng/mL.
- Standard curve
Storage： 2-8℃.
validity： six months.
FOR RESEARCH USE ONLY; NOT FOR THERAPEUTIC OR DIAGNOSTIC APPLICATIONS! PLEASE READ THROUGH ENTIRE PROCEDURE BEFORE BEGINNING!
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验相关实验
有替代前者的趋势。由于ABS-ELISA较普通ELISA多用了两种试剂，增加了操作步骤，在临床检验中ABS-ELISA应用不多。科研项目中检测微量的成分如细胞因子常采用本法。晶美分装ELISA KIT采用的方法：1， TORCH及传染病试剂盒（间接法），见2.2.32， TORCH-IgM捕获法特色：包被抗体，标记抗原原理：3， 细胞因子试剂盒采用的方法路线（ABC-ELISA）原理产品特色：采用ABC法，灵敏度更高，特异性更强。生物素抗体和酶联物是浓缩的，使用前需用相应的缓冲液稀释。酶联物可以通用
亨廷顿舞蹈症 | 一文理清mHTT在HD发病机制中的核心枢纽作用
严重程度；MRI/CT显示尾状核等萎缩；血清或脑脊液NfL预测进展；基因检测精确测定CAG重复数（≥40确诊，27-35为中间型）。诊断标准需结合典型三联征（舞蹈样动作、认知及精神障碍）、常染色体显性家族史及CAG重复数＞35。符合前两项可临床诊断，基因确认则确诊；仅有基因异常而无临床症状者定义为症状前HD；有家族史但无典型症状者也建议基因检测以排除。 菲恩生物聚焦亨廷顿舞蹈症（HD）研究，提供高纯度突变亨廷顿蛋白（mHTT）及关键神经退行性靶点蛋白，检测ELISA试剂盒与神经元损伤标志物。全面
CUSABIO季度文献盘点：二季度新增600篇产品引用文献，总文献数量已达 31400篇！
-1β ELISA Kit; CSB-E08054m 研究亮点 银屑病皮损中PRELP表达下调，IL-17A通过STAT3直接抑制PRELP转录。PRELP可抑制角质形成细胞增殖、促进凋亡，并阻断NF-κB/MAPK通路，减少炎症因子及IL-6/IL-23/IL-1β分泌，从而抑制Th17分化。过表达PRELP可减轻小鼠银屑病样皮炎，提示其作为IL-17A通路内源性负调控因子的治疗潜力。 02 标题：Myeloid Mas drives
技术资料需要更多技术资料 索取更多技术资料
人肽酰脯氨酰异构酶 ( 亲环蛋白 ) 样1 ( PPIL1 ) ELISA Kit
￥3200
