- ¥2147
- PALL
- 美国
- AVFP02L
- 2025年08月19日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 询价记录
- 文献和实验
- 技术资料
- 库存：
12/pkg
- 供应商：
研卉生物
- 规格：
12/pkg
Materials of Construction
- Plastic Funnel: Polystyrene
- Collection Reservoir: Copolyester
- Lid, Funnel Base, Storage Cap, and Vacuum Port: Polypropylene
- Funnel Base Gasket and Storage Cap Gasket: Polyethylene coated foam
- Membrane: Supor polyethersulfone (PES)
Membrane Diameter
- 10.2 cm (4 in.)
Dimensions
- System Diameter: 13.7 cm (5.4 in.)
- System Height:
- 250 mL – 12.7 cm (5 in.)
- 500 mL – 17.8 cm (7 in.)
- 1 L – 25.4 cm (10 in.)
Operating Temperature Range
- 4–37 °C (39–98 °F) Do not autoclave.
- Bottle storage: -4–50 °C (24–122 °F) Cold storage at lower temperature should be evaluated by the end user to determine suitability of the solution in the collection reservoir.
Recommended Operating Vacuum
- 380 mm Hg (15 in. Hg)
Maximum Operating Vacuum
- 510 mm Hg (20 in. Hg)
Bacterial Retention
- Samples of 0.2 μm pore size systems retain a minimum of 107 cfu/cm2 of Brevundimonas diminuta per modified ASTM F838; current revision.
Cytotoxicity
- Systems are non-cytotoxic and meet the requirements of the Elution Test, ISO 10993-5, 1999.
Endotoxin Level
- < 0.25 EU/mL utilizing Limulus Amebocyte Lysate (LAL) test.
Typical Water Flow Rate
- Time to filter 500 mL of 0.2 μm filtered water at 380 mm Hg (15 in. Hg), ambient temperature
| Pore Size | PES membrane |
| 0.2 μm | < 45 seconds |
| 0.45 μm | < 28 seconds |
Sterilization
- Individually bagged and sterilized by gamma irradiation.
-
For Fast Vacuum Filtration with an Ergonomic Design
- Patented Supor® polyethersulfone (PES) membrane – Allows fast flow rates and is ideal for cell culture and media prep, buffers, and other aqueous solutions.
- Low protein binding membrane – To minimize loss of active ingredients.
- Low center of gravity – Improves filtration system stability and reduces risk of system tipping during filtration process.
- New ergonomic design – Curved sides molded into the reservoir allow for easy handling and use, while convenient finger tabs on the funnel base and storage cap allow for easy removal and tightening.
-
Part Number Description Pkg AcroVac Filter Units with Supor Membrane AVFP02S Supor membrane, 0.2 μm, sterile, 250 mL 12/pkg AVFP02M Supor membrane, 0.2 μm, sterile, 500 mL 12/pkg AVFP02L Supor membrane, 0.2 μm, sterile, 1L 12/pkg AVFP04S Supor membrane, 0.45 μm, sterile, 250 mL 12/pkg AVFP04M Supor membrane, 0.45 μm, sterile, 500 mL 12/pkg AVFP04L Supor membrane, 0.45 μm, sterile, 1L 12/pkg
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
- 作者
- 内容
- 询问日期
文献和实验过滤后向空中排放。外部排风口应远离送风口并设置在主导风的下风向，应至少高出所在建筑2m，应有防雨、防鼠、防虫设计，但不应影响气体直接向上空排放。 7．高效空气过滤器应安装在送风管道的末端和排风管道的前端，以避免污染风道。 8．通风系统、高效空气过滤器的安装应牢固，实验室的通风系统中使用的所有部件必须为气密型。所使用的高效空气过滤器不得为木框架和纸隔板结构。高效空气过滤器的安装必须牢固。高效过滤器在更换前应消毒，或采用可在气密袋中进行更换的过滤器，更换后应立即进行消毒或焚烧。每台高效过滤器安装
到8级。 6．实验室的排风应经高效过滤后向空中排放。外部排风口应远离送风口并设置在主导风的下风向，应至少高出所在建筑2m，应有防雨、防鼠、防虫设计，但不应影响气体直接向上空排放。 7．高效空气过滤器应安装在送风管道的末端和排风管道的前端，以避免污染风道。 8．通风系统、高效空气过滤器的安装应牢固，实验室的通风系统中使用的所有部件必须为气密型。所使用的高效空气过滤器不得为木框架和纸隔板结构。高效空气过滤器的安装必须牢固。高效过滤器在更换前应消毒，或采用可在气密袋中进行更换
干裂及微生物生长率下降。三层包装沉降皿(90mm平皿—30mL装量)，很好满足了装量大的要求，防止出现琼脂块开裂的现象。同时，选用进口优质培养基原材料，引进国外先进生产线，培养基质量稳定性好，批间差异小。其次，三层包装平板在局部A级环境灌装，Gamma射线最终辐照灭菌，三层密封包装，确保产品无菌及较长的保质期(6个月)。每个皿均标注产品名称、批号、生产日期、有效期等信息，生产过程实行全程监控，确保从原材料到最终产品每一步的可追溯性，为企业的生产安全的可控性提供了有效的保证。此外，在GMP要求中
技术资料暂无技术资料 索取技术资料
