- 询价
- 爱必梦(abm)
- T0345
- 2025年07月15日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件：
详询
- 库存：
99
- 供应商：
广州市左克生物
- 规格：
1x10
| Cat. No. | T0345 |
| Name | Immortalized Human Epidermal Keratinocytes |
| Description |
Real Time PCR was used to quantify the transgene expression |
| Organism | Human (H. sapiens) |
| Tissue | Skin |
| Donor History | Not disclosed |
| Growth Properties | Adherent, polygonal |
| Cell Type | Immortalized Cells |
| Storage Condition | Vapor phase of liquid nitrogen, or below -130°C. |
| Shipping Conditions | Ship with dry ice. |
| Product Format | Frozen |
| Intended Use | This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. |
| BioSafety | II |
| Certificate of Analysis | For batch-specific test results, refer to the applicable certificate of analysis that can be found at www.abmgood.com. |
| Growth Conditions |
PriCoat™ ECM T25 Flasks (G999) or Applied Cell Extracellular Matrix (G422) are required for cell adhesion to the culture vessels. Keratinocyte Medium Kit (TM040), 37.0°C, 5% CO₂. Note: Cells are sensitive to trypsin; TrypLE Express is recommended for subculture procedures. |
| Unpacking and Storage Instructions |
1. Visually examine the packaging containers for signs of leakage or breakage. 2. Immediately transfer frozen cells from dry ice packaging to a temperature below -130°C, preferably in liquid nitrogen vapor phase storage, until ready for use. To ensure the highest level of viability, thaw the vial and initiate culture as soon as possible upon receipt. If continued storage is desired, the vial should only be stored below -130°C or in liquid nitrogen vapor phase. Do not store at -70°C, as it will result in loss of viability. |
| Thawing Protocol |
1. Thaw cells quickly in a 37°C water bath while agitating gently (maximum 2 minutes). The vial cap should be kept above the water level to minimize the risk of contamination. 2. Decontaminate the vial by spraying and wiping the exterior of the vial with 70% ethanol. From this point onwards, all operations should be strictly carried out inside a biological safety cabinet using aseptic conditions. 3. Transfer the cell suspension into a 15ml sterile conical tube containing 5ml of pre-warmed, complete growth media. Centrifuge cells at 125xg for 5-7 minutes. 4. Aspirate the supernatant without disturbing the cell pellet. Re-suspend the cell pellet in the recommended pre-warmed, complete growth media and dispense into a T25 culture flask. 5. Incubate the cells at the recommended conditions. |
| Subculture Protocol |
Cells are sensitive to trypsin; TrypLE Express is recommended for subculture procedures. Volumes given below are for a T75 flask; proportionally increase or decrease the volume as required per culture vessel size. Subculture cells once the culture vessel is 80% confluent. 1. Aspirate the culture media, and add 2-3ml of pre-warmed TrypLE Express to the culture vessel. 2. Observe the cells under a microscope to confirm detachment (typically within 2-10 minutes). Cells that are difficult to detach can be put in 37°C, for several minutes to facilitate detachment. 3. Neutralize TrypLE Express by adding an equal volume of the complete growth media into the culture vessel. 4. Transfer the culture suspension into a sterile centrifuge tube, and centrifuge at 125xg for 5 minutes. The actual centrifuge duration and speed may vary depending on the cell type. 5. Aspirate the supernatant, and re-suspend the pellet with pre-warmed fresh complete growth media. Add appropriate aliquots of the cell suspension to new culture vessels, as desired. 6. Incubate the cells at the recommended conditions. |
| Cryopreservation |
Cryopreservation Medium (TM024), or complete growth media with 10% DMSO. |
| Seeding Density (cells/cm2) | 10,000 - 15,000 |
| Split Ratio | 1:2 to 1:3 |
| Population Doubling Time (h) | 24 - 34 |
| Immortalization Method |
Serial passaging and transduction with recombinant lentiviruses carrying SV40 Large T antigen |
| Expression |
K1, Puromycin and Neomycin-resistance |
| Material Citation | If use of this material results in a scientific publication, please cite the material in the following manner: Applied Biological Materials Inc, Cat. No. T0345. |
| Warranty | abm warrants that cell lines shall be viable upon initiation of culture for a period of thirty (30) days after shipment and that they shall meet the specifications on the applicable abm Material Product Information sheet, certificate of analysis, and/or catalog description. Such thirty (30) day period is referred to herein as the "Warranty Period”. |
| Disclaimer |
1. All test parameters provided in the CoA are conducted using abm's standardized culture system and procedures. The stated values may vary under the end-user's culture conditions. Please verify that the product is suitable for your studies by referencing published papers or ordering RNA (0.5 μg, Cat.# C207, $450.00) or cell lysate (100 μg, Cat.# C206, $600.00) to perform preliminary experiments, or alternatively use our Gene Expression Assay Service (Cat# C138). All sales are final.
2. We recommend live cell shipments for ease of cell transfer and this option can be requested at the time of ordering. Please note that the end-user will need to evaluate the feasibility of live cell shipment by taking into account the final destination's temperature variation and its geographical location. In addition, we thoroughly test our cell lines for freeze-thaw recovery. If frozen cells were received and not recovered in your lab under the exact, specified conditions (using recommended culture vessel, media, additional supplements, and atmospheric conditions), a live cell replacement is possible at a cost (plus shipping).
3. All of abm's cell biology products are for research use ONLY and NOT for therapeutic/diagnostic applications. abm is not liable for any repercussions arising from the use of its cell biology product(s) in therapeutic/diagnostic application(s). Please contact a technical service representative for more information.
4. abm makes no warranties or representations as to the accuracy of the information on this site. Citations from literature and provided for informational purposes only. abm does not warrant that such information has been shown to be accurate.
5. abm warrants that cell lines shall be viable upon initiation of culture for a period of thirty (30) days after shipment and that they shall meet the specifications on the applicable abm Material Product Information sheet, certificate of analysis, and/or catalog description. Such thirty (30) day period is referred to herein as the "Warranty Period."
|
| Application | Research Use Only. |
| Material Citation | If use of this material results in a scientific publication, please cite the material in the following manner: Applied Biological Materials Inc, Cat. No. T0345 |
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验相关专题 细胞培养基的配制 millipore .html' target='_blank'>Millipore 公司宣布独家推出表皮角质形成细胞的3D细胞培养 基。该培养基由CELLnTEC公司(CELLnTEC Advanced Cell Systems)研发。根据两家公司在2006年签订的合作协议，millipore .html' target='_blank'>Millipore 共同拥有并出售。 过去，3D
人皮肤角质形成细胞的分离与原代无血清培养.pdf
和眼科剪仔细分离皮肤和皮下组织，去除脂肪和疏松结缔组织。 2. 将皮肤展评，用手术刀切成2-3mm2的小片，放入中性蛋白酶消化液中，4℃下消化15-20h，或37℃下消化2-4h。 3. 用无菌针头和眼科镊子分离真皮与表皮。表皮薄而透明，真皮厚且轻微肿胀的凝胶状。 4. 将分离出的表皮块用0.25%胰蛋白酶，在37℃下振荡消化10-20min后，加入含10%胎牛血清的培养基终止消化。 5. 1500r/min分离心5min，吸去上清液，用培养液重新悬浮沉淀细胞，用吸管轻轻吹散细胞
技术资料暂无技术资料 索取技术资料
