- ￥1
- Norgenbiotek
- NGB-TM41310
- 2025年07月12日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 库存：
999
- 规格：
100Reactions
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验Transformation of E. coli by Electroporation
and then pressing the UP voltage control button until the voltage reading is 5 to 10 volts higher than the desired discharge voltage. For E. coli , the standard conditions are 2.4 kv, which means setting the Pulse Control unit to 405 volts (400 volts is the desired
of the genomic location on the X axis versus the ratio of the two dye signals (test/control). For OGT array 010010, the genomic location of the probes on the file is based on the EMBL E.coli K12 MG1655 genomic sequence (ID U00096). For OGT array
Transformation of E. coli by Electroporation电穿孔转化E.coli
chamber selection knob to your first sample to direct the electrical impulse to the desired chamber. 10.With power still OFF, check settings or set to: Pulse control = 330 µF Low Omega FAST charge rate 11.For E. coli , set resistance to 4kOmega
技术资料暂无技术资料 索取技术资料
