CABLE, SENSOR-STRUT LOCKED(Ser

全自动血液分析仪的维护保养与故障排除

SENSoR TIME OUT。此故障一般是某个电磁阀出现问题,导致鞘流池传感器溢出正常范围。通过主菜单SERVICE →USER →MECHANICAL SYS2TEM2EHEK VALVES 逐个检查电磁阀共31 个,找到损坏的,将其拆下并更换电磁阀线圈。 3. 4 仪器采血针变形　由于长时间使用及外力作用,样本采样针容易变形弯曲,致使针的上下移动阻力加大,有时针运行不到位使测试失败。这时需要更换采样针,更换时按照拆装步骤,动作要轻,千万不要用力过猛,因为采样针比较细长容易弯曲。全自

UPDATED DIRECTIONS FOR NEW BRUNSWICK MOBILE PILOT PLANT FERMENTOR

is usually good for 24-36 hours of use). 7. Turn on main power. 8. Turn on main service valves for steam, water and air. 9. Open air, water, and steam valves on fermentor. Check for leaks. 10. Make sure seal steam and seal steam condenser

Using Biacore to Measure the Binding Kinetics of an Antibody‐Antigen Interaction

Basic Protocol 1: Identification of Optimal Immobilization pH (pH Scouting) Basic Protocol 2: Immobilization of Ligand to Sensor Chip Using Amine Coupling Basic Protocol 3: Regeneration Scouting