• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        Staining Procedure for Flow Cytometric Detection of Human Cyclins

        互联网

        2088

        Staining Procedure for Flow Cytometric Detection of Human Cyclins

        This is a standard protocol used at Pharmingen for Quality Control testing of the anti-cyclin antibodies by flow cytometry. It is a good starting point. However, investigators may need to optimize protocols for their own experimental system. It is particularly useful to refer to the published literature regarding protocols typically used for a given type of protein.

        MATERIALS:
        12 x 75 mm test tubes, Pipetman pipettes (P-20, P-200 and P-1000), 50 ml conical tubes, Pipet tips, Tabletop centrifuge or equivalent, Permanent marker, Aspirator

        BUFFERS:
        Phosphate Buffered Saline (PBS): (Cat. No. 21428A; 3 bottles of 125 ml each): 140 mM NaCl, 2.7 mM KCl, 10 mM Na2 HPO4 , 1.8 mM KH2 PO4 dissolved in distilled, water. The pH has been adjusted to 7.2 using hydrochloric acid.
        Wash Buffer: PBS/0.1% NaN 3 /1% heat-inactivated fetal bovine serum. The pH of the Wash buffer should be 7.1�7.4.

        REAGENTS: Wash buffer stored at 4°C, 75% ethanol stored at �20°C, Pure methanol stored at -20°C, 1% formaldehyde (methanol-free) in PBS, stored at 4°C, 0.25% Triton ® X-100 in Wash buffer, stored at 4°C, propidium iodide (PI) solution: 10 µg/ml PI in PBS, stored at 4°C.

        Procedure:

        I.

        Fixation

         

        1.

        Harvest, count and pellet cells following standard procedures.

        2.

        Wash cells once by resuspending the pellet in 30-40 ml of Wash buffer. Centrifuge at 200 x g for 10 min and aspirate supernatant.

        3.

        While vortexing, add 10 ml cold 75% ethanol (for D1, use pure cold methanol), drop by drop, to the cell pellet.

        4.

        Incubate at �20°C for a minimum of 2 hr. The fixed cells can be stored at �20°C in 75% ethanol for up to 30 days.

        Note: For D-type cyclins (besides D1) the cells should first be fixed in 5 ml of 1% methanol-free formaldehyde in PBS for 15 min on ice (or at 4°C) prior to fixation with ethanol. Following incubation with formaldehyde, centrifuge at 200 x g for 10 min and aspirate supernatant. Resuspend pellet in 30-40 ml Wash Buffer, centrifuge at 200 x g for 10 min and aspirate supernatant. Then go to Step No. 3 above.

        II.

        Staining

         

        1.

        Just prior to staining, remove ethanol by centrifugation at 200 x g for 10 min. Aspirate and wash once by resuspending pellet in 30-40 m l of Wash buffer. Centrifuge at 200 x g for 10 min. Aspirate supernatant.

        2.

        Add 5 ml cold 0.25% Triton ® X-100 in Wash buffer to the cell pellet, vortex and incubate 5 min on ice (or at 4°C).

        3.

        Add 30-40 ml Wash buffer to the above suspension and centrifuge at 200 x g for 10 min. Aspirate supernatant.

        4.

        Resuspend pellet in Wash buffer to a final concentration of 1 x 107 cells/ml.

        5.

        Aliquot 100 m l cell suspension (1 x 106 cells) into 12 x 75 mm tubes for staining.

        6.

        Add 20 m l of anti-cyclin or isotype control antibody at optimal working dilution. Incubate 30 min at RT in the dark.

        7.

        Add 2 ml Wash buffer, centrifuge for 5 min at 200 x g. Aspirate supernatant.

        8.

        If using directly conjugated isotype controls and mAbs, go to Step 10 below.

        9.

        If using unconjugated isotype controls and mAbs, add 20 m l of FITC-conjugated goat anti-mouse Ig (Cat. No. 12064D) at optimal working dilution. Incubate 30 min at RT in the dark. Add 2 ml Wash buffer, centrifuge 5 min at 200 x g Aspirate supernatant.

        10.

        Resuspend cell pellet in 0.5 ml PI solution for simultaneous analysis of DNA cell cycle and cyclin expression. Incubate cells at 4°C in PI for 20 min prior to analyzing by flow cytometry. Analyze stained cells within 4 hr. Store at 4°C in the dark prior to analysis.

        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序