• 我要登录|
  • 免费注册
    |
  • 我的丁香通
    • 企业机构:
    • 成为企业机构
    • 个人用户:
    • 个人中心
  • 移动端
    移动端
丁香通 logo丁香实验_LOGO
搜实验

    大家都在搜

      大家都在搜

        0 人通过求购买到了急需的产品
        免费发布求购
        发布求购
        点赞
        收藏
        wx-share
        分享

        T-cell dependent antigen specific in situ staining (Pe)

        互联网

        4642
         

        Double staining for Ag and Ki-67, TUNEL or BCL-6.

        Cut frozen tissue sections (spleen, lymph nodes) in a cryostat at  ~ 4µm, on plain glass slides (Adhesive -coated slides are sometimes too hydrophobic, but fine if you have them).
        Let them dry approx 1 hour in a dry atmosphere at RT. Antibodies (anti-Pe) in the sections degrade more rapidly than tissue antigens. Proceed with staining within 24 hours or freeze the slides.

        Antigen-specific staining: (Pe staining of Pe-immunized animals).

        1- Fix the sections in 10% buffered formalin for 10 min. at RT.
        2- Wash briefly in tap water, then once in distilled water and then in TBS 0.05M pH7.5 + 0.01% Tween 20 (TBS-T).
        3- Briefly blot the slides without letting them dry and then apply 3% human serum as a blocking agent (health hazard!).
        4- incubate with the blocking for 10 min.
        5- blot the slides without washing and apply Phycoerythrin (B-Pe or R-Pe) 0.5µg/ml in PBS-BSA-NaN 3 , in a moist chamber, at RT for 1-18 hr.
        6- Wash twice in TBS-T.
        7- counterstain with rabbit anti B-Pe 1:2000 (0.5 µg/ml Cortex Biochem).
        You may add 1% mouse serum to the anti-Pe antibodies, unless you plan to use mouse monoclonal further (see below).
        8- wash twice in TBS-T.
        9- block endogenous peroxidase by incubating in TBS-T 0.1%NaN 3 and 0.3% H 2 O 2 for 30 min.  Wash thrice.
        Top of Page             Choose next steps:
        HRP-conjugated secondary Ab
        Tyramide amplification
        Biotin-conjugated secondary Ab



        HRP-conjugated secondary Ab choice:

        10- add the HRP-conjugated Goat anti rabbit (Vector 50 to 100 µl, dilution 1:100) and incubate for 30’.
         Swine anti-rabbit (Dako) can be used at 1:300 dilution.
        If you use this step for tyramide amplification (see below)  dilute the Goat anti Rabbit to 1:200.
        11- wash thrice in TBS-T.
        12- develop (see protocol ). Protect from direct light.
        Continue

        Tyramide amplification choice:

        Use tyramide amplification here
        Continue

        Biotin-conjugated secondary Ab choice:

        10- add the biotin-conjugated goat anti-rabbit (50 to 100 µl, dilution 1:200) and incubate for 30 min.
        11- wash thrice in TBS-T.


        From this step on follow either "Development (Avidin-HRP) " or "Double staining ".
         


        Development (Avidin HRP):

        12 -add the HRP-conjugated avidin (50 to 100 µl, dilution 1:300 -500) and incubate for 20 min. Be careful not to dilute the avidin in biotin-containing medium.
        13- wash thrice in TBS-T.
        14- add 50 ml of  the developing solution (see below ). Protect from direct light.
        15- after 5 min, check the staining in your positive and negative controls.
        16- check the staining until complete, dense staining is obtained, but background is still low.
        17- when staining is complete, wash thoroughly in tap water. Counterstain.
        18- transfer to TBS-T. Warm. Mount.
         

        Double staining (BCL-6, TUNEL)

        11 -fix in absolute methanol RT for 10 min. Warning: methanol dissolves AEC and blocks HRP. Do this step only after biotin-secondary or tyramide-biotin.
        12- rinse in water, bring to TBS-T.
        13- add the HRP-conjugated avidin (50 to 100 µl, dilution 1:300 -500) and incubate for 20 min.
        14- wash thrice in TBS-T
        15- add 50 ml of  the developing solution (see below ). Protect from direct light.
        16- after 5 min, check the staining in your positive and negative controls
        17- check the staining until complete, dense staining is obtained, but background is still low.
        18- rinse in TBS-T
                Choose next steps:
        Double staining with TUNEL
        Double staining with antibodies

         

        Double staining (antibodies):

        19- apply the diluted antibody (BLC-6, Ki-67, others)
        20- wash twice in TBS-T
        21- counterstain with an AP-conjugated secondary antibody (Typically SBA goat anti rabbit-AP 1:100, rabbit anti goat-AP 1:300)
        22- wash twice
        23- [optional] add a tertiary layer (rabbit anti-goat-AP on a goat anti-rabbit-AP)
        24- wash thrice
        25- develop AP (see protocol).

        Double staining (TUNEL):
        19- warm the section in TBS
        20- prepare a warm incubation box
        21- set up the TUNEL mixture (see data sheet)
        22- incubate 30 min at 37°C.
        23- wash thrice in TBS-T
        24- apply goat anti-FITC-HRP 1:200
        25- wash twice
        26- counterstain with rabbit anti-goat-AP 1:200
        27- wash thrice
        28- develop AP (see protocol)

        HRP development protocol (AEC):
        Developing solution:
        For 50 ml developing solution add in order:
        • Aminoethylcarbazole (20 mg tablets, Sigma A-6926, dissolved in 2.5 ml NN-DM formamide)
        • 50 ml acetate buffer pH 5.5 (52.5 ml of 0.1M acetic acid solution + 196.5 ml of a 0.1M Na acetate solution, bring to 500 ml)
        • 25 µl H 2 O 2 30%.
        Shake well
        Filter with a 45µm filter (optional).
        Keep away from direct light, use within 5 min.

        AP development protocol (Diazonium salts):
        Developing solution:
        For 50 ml developing solution add in order:

        • 50 ml Tris-Hcl 0.1M pH 9.2 (exact!) (1:10 from a stock solution 1M)
        • Levamisole 1mM (12 mg/50 ml) (Sigma L9756)
        • 20 mg Naphtol As BI phosphate (stock solution 40 mg/ml in NN-DM formamide, anhydrous, kept at -20°C) (Sigma N2250, the cheapo)
        • 10 mg Fast Blue BB Diazonium salt  (Sigma F3378)
        Shake well
        Filter with a 45µm filter.
        Keep away from direct light, use within 5 min.

        Golden rules during and after development :

        • after 5 min, check the staining in your positive and negative controls.
        • check the staining at 10-15 min interval.
        • when staining is complete (usually < 1 hr), wash thoroughly in tap water.
        • preferably postfix in formalin for 4-5 hrs before mounting in water soluble mounting medium (glycerol gelatin).
        • do not counterstain, unless you can afford a very gentle hematoxilyn hue in the nuclei.

        <center> <font>click on the image to enlarge</font></center> <center>  </center> <center> <p>  </p> </center>
        上一篇:Double immunofluorescence staining for BCL-6 and else   下一篇:分离人单核细胞和中性粒细胞-Purification of human mononuclear cells and neutrophi
        ad image
        提问
        扫一扫
        丁香实验小程序二维码
        实验小助手
        丁香实验公众号二维码
        扫码领资料
        反馈
        TOP
        打开小程序