相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 免疫原:
A DNA sequence encoding the human TNFSF4 (Gln51-Leu183) was expressed with the Fc region of human IgG1 at the N-terminus.
- 亚型:
见说明书
- 形态:
液体
- 保存条件:
4℃
- 克隆性:
无
- 标记物:
见说明书
- 适应物种:
Human
- 保质期:
12个月
- 抗原来源:
见说明书
- 目录编号:
13127-H01HL
- 级别:
免疫学
- 库存:
99
- 供应商:
北京义翘神州科技股份有限公司
- 宿主:
HEK293 Cells
- 应用范围:
0
- 浓度:
见说明书
- 靶点:
TNFSF4
- 抗体英文名:
Human OX-40L / TNFSF4 / CD252 HEK293 Cell Lysate (WB positive control)
- 抗体名:
Human OX-40L / TNFSF4 / CD252 HEK293 Cell Lysate (WB positive control)
- 规格:
300 µg
反应种属:Human
裂解液靶点:TNFSF4
裂解液应用:WB
裂解液保存条件:Store at 4℃. After re-dissolution, aliquot and store at -80℃.
裂解液产品描述:Human Cells that Human OX-40L / TNFSF4 / CD252 Heterodimer transfected / overexpressed for Western blot (WB) positive control. The whole cell lysate is provided in 1X Sample Buffer (1X modified RIPA buffer+1X SDS loading buffer).
裂解液表达宿主:HEK293 Cells
裂解液制备方法:Cell lysate was prepared by homogenization of the over-expressed cells in ice-cold modified RIPA Lysis Buffer with cocktail of protease inhibitors (Sigma). Cell debris was removed by centrifugation. Protein concentration was determined by Bradford assay (Bio-Rad protein assay, Microplate Standard assay). The cell lysate was boiled for 5 min in 1 x SDS loading buffer (50 mM Tris-HCl pH 6.8, 12.5% glycerol, 1% sodium dodecylsulfate, 0.01% bromophenol blue) containing 5% b-mercaptoethanol, and lyophilized.
裂解液Buffer:Modified RIPA Lysis Buffer: 50 mM Tris-HCl pH 7.4, 150 mM NaCl, 1mM EDTA, 1% Triton X-100, 0.1% SDS, 1% Sodium deoxycholate, 1mM PMSF.
裂解液质控信息:12.5% SDS-PAGE Stained with Coomassie Blue after protein purification.
裂解液使用建议:1. Centrifuge the tube for a few seconds and ensure the pellet at the bottom of the tube. 2. Re-dissolve the pellet using 200μL pure water and boil for 2-5 min.
裂解液稳定性:Samples are stable for up to twelve months from date of receipt.
裂解液使用说明:Western blot (WB): Use at an assay dependent dilution. Other Applications: Not tested. Optimal dilutions/concentrations should be determined by the end user.
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验有黑点。 方法4 免疫印迹 1样品制备和蛋白定量 1.1 容液配制 10ml100mmol/L PMSF:0.1742g溶于10ml的异丙醇中,至与4?C保存。 50ml 5mol/L NaCl:14.61g溶于40ml三蒸水中,定容至50ml。 100ml 20% SDS:20g溶于80ml水中,加热溶解,定容至100ml。 100ml 1mol/LTris-HCl: 12.114g溶于80ml三蒸水中,定容至100ml。 配RIPA裂解液
g 4% CHAPS 0.4 g 0.5mM EDTA 0.00146 g 40Mm Tris 0.0485 g 2%(v/v) NP-40 0.2 ml 1%(v/v) Triton X-100 0.1 ml 5mM PMSF用前加 0.00871 g 2%pharmalyte 0.2ml 共10ml分装成400µl/每管(可应用于30-80毫克组织裂解) 注:已配好分装成400µl
糖,建议进行 Pre-clear;如果使用磁珠,此步可忽略 抗 X 抗体的轻链(25 kD)和重链(50 kD) 更侧重于如何在实验上进行优化(见下文) *注意:总蛋白上样量过多也会造成 非特异性结合,建议上样量为 500 ug-1 mg。上样之前一定要先用 BCA 定个量!定个量!定个量! pre-clear:上样前先用裂解液过一遍柱子,减少基质本身对蛋白的吸附 Output:在某些 co-IP 实验中,实验人员会把IP后的上清分别进行诱饵蛋白 X 和靶蛋白 Y 的 WB 检测
技术资料暂无技术资料 索取技术资料










