CellCrown™ inserts

eneral描述
cellcrown 96是独特的和新的细胞培养插入标准96好平。This is the first插入in the market，允许容易附着of thicker样品，up to 2毫米in the插入。附件中是可行的也是刚性between the控股杯和插入。
杯can be used独自控股和它防止附着of the sample to the bottom of the well。插入部分可以放置two ways and higher in更深的位置。当我们两个孔边缘of杯和cusps in the Inner方面是匹配the插入是适合薄样品。when they are not in the same位置，组合是适合samples of in厚度2毫米。请注意，他是轻微和内杯部分的位置和插入失败者in this need to be with care处理。
在安装of the样品杯是切断from their帧and the插入is ready to be used in好平。It is also to use短零件可能比8排插。the轮之间的部分插入标记允许明确识别中的研究。在细胞culturing It is important to follow the sufficient level of cell文化传媒在威尔斯。for cellcrown 96 the recommended amount of Media in well is 170～200μl，根据size of the sample
cellcrown 96刀片是透明颜色，黑版was used for photographing for clearer图像。
cellcrown是一次性插入，which immobilizes a sample in its的地方我们有6、12、24、48、96井平台。纤维膜，foils，纺织品，组织和块样样品可以固定以及cellcrown in a firm，调整位置in the well。the sample can be left in the well during the change of Media by means of a吸管between the Wall of the well and the cellcrown。the盖of the well can be closed平坦而cellcrown is used。the插入can be removed from the well and unloaded平后culturing without damaging the sample细胞。cellcrown is made of Medical级聚碳酸酯和产品范围包括无菌制品ready to use as well as非无菌制品to be sterilized by the user。sterilization can be byγ辐射电子束金，autoclaving，乙烯气体与等离子体消毒
•使用前支架与组织中的小
•建立样品颗粒过滤器顶部of the
•use as a模for水凝胶
•文化两个细胞类型同时，一个我们前of the filter and one below
消毒条件：
121°C／250°F温度。
容忍时间15分钟。
干燥时间………15分钟。