- ￥713 - 2193
- Sigma-Aldrich
- 美国
- 419680
- 2025年08月30日
4 年钻石会员
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保质期：
见包装
- 库存：
990
- 供应商：
亦高生物
- CAS号：
9050-36-6
- 规格：
419680-100G/419680-500G
| 规格： | 419680-100G | 产品价格： | ￥713.0 |
|---|---|---|---|
| 规格： | 419680-500G | 产品价格： | ￥2193.0 |
General description
Maltodextrin is a carbohydrate polymer that can be classified as a carbohydrate. It can be produced through starch acid hydrolysis. The powder material formed after purification and spray drying can be used for various food and beverage products. It can be used as a good source of energy in food, with an energy value of 16 kJ/g. [1][2]
application
Maltodextrin can be used as a bonding additive for 3D printing manufacturing. [3] It can also be used as a shaping agent for preparing bean sprout extract.
Maltodextrin is a carbohydrate polymer that can be classified as a carbohydrate. It can be produced through starch acid hydrolysis. The powder material formed after purification and spray drying can be used for various food and beverage products. It can be used as a good source of energy in food, with an energy value of 16 kJ/g. [1][2]
application
Maltodextrin can be used as a bonding additive for 3D printing manufacturing. [3] It can also be used as a shaping agent for preparing bean sprout extract.
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验该产品被引用文献
Investigating approaches for three-dimensional printing of hydroxyapatite scaffolds for bone regeneration
Key Engineering Materials, 631(1), 306-311 (2015)
相关实验
空气，以保证果汁中的营养成分特别是维生素C少受破坏。所用果汁浓度的高低，因生产工艺而定。如果采用喷雾干燥法或浆料真空干燥法，则果汁浓度可低些，否则果汁浓度应尽可能高，一般要求达到波美度40度左右，即固形物接近70％左右。取得的果汁浓浆应占产品量的12－20%。 2、甜味料处理： 所用的白糖是固体饮料的主要原料，需经过烘干磨成糖粉，用量为70－75％，其他添加剂如柠檬酸1－1.5%，色素适量，香精适量。 3、原料混合： 把添加剂与浓缩果汁混合，并加入5－8%麦芽糊精，这是一种干燥助剂
技术资料暂无技术资料 索取技术资料
文献支持
麦芽糊精 *Sigma货号：419680-500G/419680-100G
￥713 - 2193
