相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 技术资料
- 库存:
42
- 英文名:
LFM-A13
- CAS号:
244240-24-2
- 供应商:
上海莼试
- 保存条件:
Store at -20°C
- 规格:
5mg 10mg 50mg 200mg
产品描述:
分子式:C11H8Br2N2O2

分子量:360
溶解度:≥ 36mg/mL in DMSO
储存条件:Store at -20°C
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition:Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
Description:IC50: 17.2 μMBruton’s tyrosine kinase (BTK), a member of the BTK/Tec family of protein tyrosine kinases, is a cytoplasmic PTK involved in signal transduction pathways regulating growth and differentiation of B-lineage lymphoid cells. BTK participates in signal transduction pathways initiated by the binding of a variety of extracellular ligands to their cell-surface receptors. LFM-A13 is a BTK-specific tyrosine kinase inhibitor.In vitro: LFM-A13 inhibited recombinant BTK expressed in a baculovirus expression vector system. Besides its remarkable potency in BTK kinase assays, LFM-A13 was also found to be a highly specific inhibitor of BTK. Even at very high concentrations, LFM-A13 did not affect the activity of other protein tyrosine kinases [1].In vivo: LFM-A13 exhibited a favorable pharmacokinetic behavior which was not adversely affected by the standard chemotherapy drugs and significantly improved the chemotherapy response and survival outcome of BCL-1 leukemia cells challenged mice. While only 14% of mice treated with the standard triple-drug combination treatment became long-term survivors, 41% of mice treated with this combination plus LFM-A13 survived long-term [2].Clinical trial: Up to now, LFM-A13 is still in the preclinical development stage.
商品属性:
注意事项:
抗逆滴加序列
每次向板内滴加抗原时,移液器滴头要与平面45度悬空,不要触碰到孔内的液体,由后向前依次滴加(即浓度由低往高滴加)。
抗感染反应期
抗原抗体在室温20~25℃下,必须反应30min以上,若环境温度低于室温,可将微量反应板置于恒温培养箱中,使二者充分反应。
旅游温度
磷酸盐缓冲液的pH值要在高压灭菌后进行滴定,往往在高压后pH值会有所改变,所以高压后再调一次pH值更为准确。磷酸盐缓冲液一经使用保存期不要超过3周。当pH<5.8时,红细胞会产生自凝现象;当pH>7.8时,图形洗脱加快,易造成肉眼观察产生误差;p H=7.2时,红细胞沉降最充分,图形最清晰。
当滴注 1%红细胞悬液时,应经常摇晃红细胞悬液,使红细胞均匀地分布在磷酸缓冲液中,以防止红细胞下降。
反应时间及温度
加入鸡红血球之后,反应板在室温(20~25℃)静置30~40min,对照孔血球下沉于孔底,即可判定结果。若室温达不到实验要求,需相应调整反应时间。当环境温度低于4℃时,红细胞发生自凝;高于37℃时,会发生反应物分离和红细胞溶血。
公司正在出售的产品:
使用方法:
1.本蛋白酶抑制剂混合物为100×的储存液,使用时按照1:100的比例加入到裂解液中(例如,1ml裂解液中加入10μl蛋白酶抑制剂混合物),混匀后即可使用。根据需要,0.5M的EDTA也按照1:100的比例加入到裂解液中(如用于检测金属蛋白酶活性,则不宜添加EDTA)。含有蛋白酶抑制剂混合物的裂解液宜现用现配,不宜配制后冻存待后续使用。
2. 待所需的抑制剂添加完毕混匀后,就可以开始进行哺乳动物组织的裂解和蛋白提取。
分子式:C11H8Br2N2O2

分子量:360
溶解度:≥ 36mg/mL in DMSO
储存条件:Store at -20°C
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition:Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
Description:IC50: 17.2 μMBruton’s tyrosine kinase (BTK), a member of the BTK/Tec family of protein tyrosine kinases, is a cytoplasmic PTK involved in signal transduction pathways regulating growth and differentiation of B-lineage lymphoid cells. BTK participates in signal transduction pathways initiated by the binding of a variety of extracellular ligands to their cell-surface receptors. LFM-A13 is a BTK-specific tyrosine kinase inhibitor.In vitro: LFM-A13 inhibited recombinant BTK expressed in a baculovirus expression vector system. Besides its remarkable potency in BTK kinase assays, LFM-A13 was also found to be a highly specific inhibitor of BTK. Even at very high concentrations, LFM-A13 did not affect the activity of other protein tyrosine kinases [1].In vivo: LFM-A13 exhibited a favorable pharmacokinetic behavior which was not adversely affected by the standard chemotherapy drugs and significantly improved the chemotherapy response and survival outcome of BCL-1 leukemia cells challenged mice. While only 14% of mice treated with the standard triple-drug combination treatment became long-term survivors, 41% of mice treated with this combination plus LFM-A13 survived long-term [2].Clinical trial: Up to now, LFM-A13 is still in the preclinical development stage.
商品属性:
| 货号 | CS-01Y67390 | 规格 | 5mg 10mg 50mg 200mg |
| CAS号 | 244240-24-2 | 分子量 | 360 |
| 含量 | >98.00% | 别名 | |
| 分子式 | C11H8Br2N2O2 | 化学名 | (1Z,2Z)-2-cyano-N-(2,5-dibromophenyl)-3-hydroxybut-2-enimidic acid |
| 产地 | 国产 | 用途 | 仅供科研研究实验 |
抗逆滴加序列
每次向板内滴加抗原时,移液器滴头要与平面45度悬空,不要触碰到孔内的液体,由后向前依次滴加(即浓度由低往高滴加)。
抗感染反应期
抗原抗体在室温20~25℃下,必须反应30min以上,若环境温度低于室温,可将微量反应板置于恒温培养箱中,使二者充分反应。
旅游温度
磷酸盐缓冲液的pH值要在高压灭菌后进行滴定,往往在高压后pH值会有所改变,所以高压后再调一次pH值更为准确。磷酸盐缓冲液一经使用保存期不要超过3周。当pH<5.8时,红细胞会产生自凝现象;当pH>7.8时,图形洗脱加快,易造成肉眼观察产生误差;p H=7.2时,红细胞沉降最充分,图形最清晰。
当滴注 1%红细胞悬液时,应经常摇晃红细胞悬液,使红细胞均匀地分布在磷酸缓冲液中,以防止红细胞下降。
反应时间及温度
加入鸡红血球之后,反应板在室温(20~25℃)静置30~40min,对照孔血球下沉于孔底,即可判定结果。若室温达不到实验要求,需相应调整反应时间。当环境温度低于4℃时,红细胞发生自凝;高于37℃时,会发生反应物分离和红细胞溶血。
公司正在出售的产品:
| 重组SARS病毒的衣壳蛋白 | RNA结合蛋白片段Y染色体家族蛋白1封闭多肽 |
| β-半乳糖苷酶1/β-Gal/弹性蛋白受体1封闭多肽 | FBXW12蛋白抗体 |
| 重组病毒A29L蛋白 | 基质交感分子2抗体 |
| 腺苷单磷酸活化蛋白激酶β1封闭多肽 | 信号诱导增殖相关蛋白1样蛋白1抗体 |
| 穿孔素封闭多肽 | 信号通路Wnt16抗体 |
| 富含亮氨酸重复家庭蛋白2封闭多肽 | 胰岛素促进因子/胰十二指肠同源异型盒蛋白抗体 |
| 磷酸化三磷酸腺柠檬酸裂解酶封闭多肽 | 磷酸化HER3抗体 |
| 癌胚抗原相关细胞粘附分子封闭多肽 | 猪瘟病毒抗体 |
| RHOD蛋白封闭多肽 | 内质网核信号转导蛋白2抗体 |
| 磷酸化MAP激酶相互作用丝氨酸/苏氨酸激酶1封闭多肽 | L3MBTL3蛋白抗体 |
| 细胞色素B5还原酶4封闭多肽 | 富含亮氨酸样酸性核蛋白抗体 |
| 线粒体核糖体蛋白S21封闭多肽 | 类固醇受体激活蛋白3抗体 |
| 蛋白酪氨酸磷酸酶样A结构域蛋白1封闭多肽 | LFM-A13原癌基因ROS1单克隆抗体 |
| 磷酸化肽基脯氨酞顺反异构酶Pnl封闭多肽 | 溶质载体家族蛋白26成员3抗体 |
| 肿瘤坏死因子受体1抗体 | 锌指蛋白结构域ZFYVE26抗体 |
1.本蛋白酶抑制剂混合物为100×的储存液,使用时按照1:100的比例加入到裂解液中(例如,1ml裂解液中加入10μl蛋白酶抑制剂混合物),混匀后即可使用。根据需要,0.5M的EDTA也按照1:100的比例加入到裂解液中(如用于检测金属蛋白酶活性,则不宜添加EDTA)。含有蛋白酶抑制剂混合物的裂解液宜现用现配,不宜配制后冻存待后续使用。
2. 待所需的抑制剂添加完毕混匀后,就可以开始进行哺乳动物组织的裂解和蛋白提取。
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
技术资料暂无技术资料 索取技术资料
LFM-A13
¥600 - 3200








