相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 技术资料
- 库存:
41
- 英文名:
Zaltidine
- CAS号:
85604-00-8
- 供应商:
上海莼试
- 保存条件:
Store at -20°C
- 规格:
2mg 5mg 10mM*1mL in Water 50mg 100mg 200mg
本产品仅供科学实验研究使用! 不能用于临床或动物诊断!
化学性质:
Zaltidine规格:2mg 5mg 10mM*1mL in Water 50mg 100mg 200mg
CAS:85604-00-8
别名:N/A
化学名:N/A
分子式:C8H10N6S
分子量:222.27
溶解度:H2O: 7.69 mg/mL (34.60 mM)
储存条件:Store at -20°C
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition: Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
产品描述:
Zaltidine(CP-57361) is a H2-receptor antagonist, which has the antisecretory action.IC50 Value: Target: H2 receptorin vitro:in vivo: In eight healthy male volunteers single oral doses of 5 mg, 25 mg and 100 mg produced dose-related inhibition of basal and pentagastrin-stimulated acid output (M.A.O.) with an estimated ID50 of 40 mg for the latter. In eight subjects with duodenal ulceration single 100 mg and 200 mg doses produced 85% and 97% inhibition of M.A.O. at peak (3 h post-dose) and 20% and 23% inhibition at 24 h, respectively; inhibition of basal acid output was 97% at 3 h and 50% at 24 h with both doses [1]. One hundred and thirty-five patients were randomly allocated to 4 weeks' treatment with either 150 mg zaltidine once daily or placebo. Fifty-nine were treated for a full 4 weeks with zaltidine before the trial was stopped. Healing rates after 4 weeks of zaltidine and placebo were 86% and 19%, respectively (p less than 0.001) [2].[1]. Laferla G, Buchanan N, Hearns J, The antisecretory effects of zaltidine, a novel long-acting H2-receptor antagonist, in healthy volunteers and in subjects with a past history of duodenal ulcer. Br J Clin Pharmacol. 1986 Oct;22(4):395-9. [2]. Farup PG. Zaltidine: an effective but hepatotoxic H2-receptor antagonist. Scand J Gastroenterol. 1988 Aug;23(6):655-8.
使用方法:
1. 常用筛选浓度
注意:用来筛选稳转株的工作浓度需要根据细胞类型,培养基,生长条件和细胞代谢率而变化,推荐使用浓度为50-1000μg/mL。对于第一次使用的实验体系建议通过建立杀灭曲线(kill curve),即剂量反应性曲线,来确定最佳筛选浓度。
一般而言,哺乳动物细胞50-500μg/mL;细菌/植物细胞20-200μg/mL;真菌300-1000μg/mL。
2. 杀灭曲线的建立
注意:为了筛选得到稳定表达目的蛋白的细胞株,需要确定能够杀死未转染宿主细胞的抗生素浓度,可通过建立杀灭曲线(剂量反应曲线)来实现,至少选择5个浓度。
1) 第一天:未转化的细胞按照20-25%的细胞密度铺在合适的培养板上,37℃,CO2培养过夜;注:对于需要更高密度来检测活力的细胞,可增加接种量。
2) 根据细胞类型,设定合适范围内的浓度梯度。以哺乳动物细胞为例,可设定50,100,250,500,750,1000μg/mL。先用去离子水或者PBS buffer按照1:10的比例将母液稀释到5 mg/ml,然后按照下表稀释到相应浓度的工作液。
3) 第二天:替换旧的培养基,换用新鲜配制的含有相应浓度药物的培养基。每个浓度做三个平行孔。
4) 接下来每3-4天更换新的含药物培养基。
5) 按照固定的周期(如每2天)进行活细胞计数来确定阻止未转染细胞生长的恰当浓度。选择在理想的天数(通常是7-10天)内能够杀死绝大多数细胞的浓度为稳定转染细胞筛选用的工作浓度。
3. 稳定转染细胞的筛选
1) 转染48h后,用含有适当浓度的潮霉素B筛选培养基来传代细胞(直接传代或者稀释后传代)。
注意:细胞处于活跃分裂状态时抗生素的杀伤。则当细胞过于稠密,其效率会降低。为了得到较好的筛选效果,最好将细胞稀释至丰度不超过25%
2) 每隔3-4天更换含有药物的筛选培养液。
3) 筛选7天后观察并评估细胞克隆(集落)的形成情况。集落的形成可能还需要一周或者更多的时间,这取决于宿主细胞类型,转染,以及筛选效果。
4) 挑取并转移5-10个抗性克隆于35mm细胞培养板,继续用含药物的筛选培养液维持培养7天。
5) 之后更换正常培养基培养即可。
公司正在出售的产品:
蛋白酶抑制剂混合物实验步骤:
(1)实验开始前将RNA提取液于65℃水浴锅中预热,离心管中加入ME(巯基乙醇),(10mL加80ul,50mL中加入300ul)
(2)取约0.8g菌丝体(液体培养获得的菌丝用真空抽滤即可!固体培养就更好说了),在液氮中迅速磨成精细粉末,装入50mL离心管,按1g材料8mL的量加入预热的RNA提取液,颠倒混匀
(3)65℃水浴3-10 min,期间混匀2-3次
(4)加入等体积的酚(注意是酸酚pH4.5)::yi戊醇(25:24:1)抽提(10,000rpm,4℃,5 min)
(5)取上清,等体积的yi戊醇(24:1)抽提(10,000rpm,4℃,5 min)
(6)加入1/4V体积10M LiCl溶液,4℃放置6h以上(或过夜)
(7)10,000rpm,4℃离心20min
(8)弃上清,用500ul SSTE溶解沉淀
(9)酚::yi戊醇(25:24:1)抽提两次,:yi戊醇(24:1)抽提1次(10,000rpm,4℃,5min)
(10)加2V体积的无水乙醇,在-70℃冰箱沉淀30min以上
(11)12,000rpm,4℃离心20 min
(12)弃上清.沉淀用70%酒精漂洗一次,干燥
(13)加200ul的DEPC处理水溶解
(14)用非变性琼脂糖凝胶电泳和紫外分光光度计扫描检测RNA的质量(在抽提过程中,若蛋白质含量或其它的杂质还较多,可以增加抽提次数)
| 产品名称 | Zaltidine | 产品货号 | CS-01Y77490 |
| 规格 | 2mg 5mg 10mM*1mL in Water 50mg 100mg 200mg | CAS号 | 85604-00-8 |
| 含量 | >99.00% | 分子式 | C8H10N6S |
| 分子量 | 222.27 | 用途 | 仅供科研研究使用 |
Zaltidine规格:2mg 5mg 10mM*1mL in Water 50mg 100mg 200mg
CAS:85604-00-8
别名:N/A
化学名:N/A
分子式:C8H10N6S
分子量:222.27
溶解度:H2O: 7.69 mg/mL (34.60 mM)
储存条件:Store at -20°C
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition: Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
产品描述:
Zaltidine(CP-57361) is a H2-receptor antagonist, which has the antisecretory action.IC50 Value: Target: H2 receptorin vitro:in vivo: In eight healthy male volunteers single oral doses of 5 mg, 25 mg and 100 mg produced dose-related inhibition of basal and pentagastrin-stimulated acid output (M.A.O.) with an estimated ID50 of 40 mg for the latter. In eight subjects with duodenal ulceration single 100 mg and 200 mg doses produced 85% and 97% inhibition of M.A.O. at peak (3 h post-dose) and 20% and 23% inhibition at 24 h, respectively; inhibition of basal acid output was 97% at 3 h and 50% at 24 h with both doses [1]. One hundred and thirty-five patients were randomly allocated to 4 weeks' treatment with either 150 mg zaltidine once daily or placebo. Fifty-nine were treated for a full 4 weeks with zaltidine before the trial was stopped. Healing rates after 4 weeks of zaltidine and placebo were 86% and 19%, respectively (p less than 0.001) [2].[1]. Laferla G, Buchanan N, Hearns J, The antisecretory effects of zaltidine, a novel long-acting H2-receptor antagonist, in healthy volunteers and in subjects with a past history of duodenal ulcer. Br J Clin Pharmacol. 1986 Oct;22(4):395-9. [2]. Farup PG. Zaltidine: an effective but hepatotoxic H2-receptor antagonist. Scand J Gastroenterol. 1988 Aug;23(6):655-8.
使用方法:
1. 常用筛选浓度
注意:用来筛选稳转株的工作浓度需要根据细胞类型,培养基,生长条件和细胞代谢率而变化,推荐使用浓度为50-1000μg/mL。对于第一次使用的实验体系建议通过建立杀灭曲线(kill curve),即剂量反应性曲线,来确定最佳筛选浓度。
一般而言,哺乳动物细胞50-500μg/mL;细菌/植物细胞20-200μg/mL;真菌300-1000μg/mL。
2. 杀灭曲线的建立
注意:为了筛选得到稳定表达目的蛋白的细胞株,需要确定能够杀死未转染宿主细胞的抗生素浓度,可通过建立杀灭曲线(剂量反应曲线)来实现,至少选择5个浓度。
1) 第一天:未转化的细胞按照20-25%的细胞密度铺在合适的培养板上,37℃,CO2培养过夜;注:对于需要更高密度来检测活力的细胞,可增加接种量。
2) 根据细胞类型,设定合适范围内的浓度梯度。以哺乳动物细胞为例,可设定50,100,250,500,750,1000μg/mL。先用去离子水或者PBS buffer按照1:10的比例将母液稀释到5 mg/ml,然后按照下表稀释到相应浓度的工作液。
3) 第二天:替换旧的培养基,换用新鲜配制的含有相应浓度药物的培养基。每个浓度做三个平行孔。
4) 接下来每3-4天更换新的含药物培养基。
5) 按照固定的周期(如每2天)进行活细胞计数来确定阻止未转染细胞生长的恰当浓度。选择在理想的天数(通常是7-10天)内能够杀死绝大多数细胞的浓度为稳定转染细胞筛选用的工作浓度。
3. 稳定转染细胞的筛选
1) 转染48h后,用含有适当浓度的潮霉素B筛选培养基来传代细胞(直接传代或者稀释后传代)。
注意:细胞处于活跃分裂状态时抗生素的杀伤。则当细胞过于稠密,其效率会降低。为了得到较好的筛选效果,最好将细胞稀释至丰度不超过25%
2) 每隔3-4天更换含有药物的筛选培养液。
3) 筛选7天后观察并评估细胞克隆(集落)的形成情况。集落的形成可能还需要一周或者更多的时间,这取决于宿主细胞类型,转染,以及筛选效果。
4) 挑取并转移5-10个抗性克隆于35mm细胞培养板,继续用含药物的筛选培养液维持培养7天。
5) 之后更换正常培养基培养即可。
公司正在出售的产品:
| 4-hydroxy Estrone | Selonsertib (GS-4997) |
| Carbazomycin D | 谷氨酸脱羧酶自身抗(GAD-Ab)检测试剂盒 |
| TVB-3166 | 雌二醇受(ER)试剂盒elisa |
| MIR96-IN-1 | 甲状旁腺激素相关蛋白(PTHrP)检测试剂盒 |
| Terrein | 半乳糖6硫酸酯酶(Gal-6S)检测试剂盒elisa |
| Celastrol | 苯丙氨酸(LPA)试剂盒ELISA |
| Rapamycin-d3 | 抗心磷脂抗IgA(ACA-IgA)ELISA检测试剂盒 |
| Cereblon modulator 1 | Tetraspanin 4(TSPAN4)ELISA Kit |
| PYR-41 | β葡萄糖醛酸苷酶(βGD)ELISA检测试剂盒 |
| Droloxifene | 高敏甲状腺素(u-T4)试剂盒ELISA |
| YMU1 | 高灵敏度促甲状腺激素(U-TSH)检测试剂盒 |
| Myricetin | 多巴胺(DA)检测试剂盒elisa |
| Muristerone A | Zaltidineβ葡糖苷酶(β-glucosidase)试剂盒elisa |
| Methazolamide-d6 | 叠氮胸苷(AZT)检测试剂盒 |
| 一氧化(NO)检测试剂盒 | 补蛋白3(C3)ELISA检测试剂盒 |
蛋白酶抑制剂混合物实验步骤:
(1)实验开始前将RNA提取液于65℃水浴锅中预热,离心管中加入ME(巯基乙醇),(10mL加80ul,50mL中加入300ul)
(2)取约0.8g菌丝体(液体培养获得的菌丝用真空抽滤即可!固体培养就更好说了),在液氮中迅速磨成精细粉末,装入50mL离心管,按1g材料8mL的量加入预热的RNA提取液,颠倒混匀
(3)65℃水浴3-10 min,期间混匀2-3次
(4)加入等体积的酚(注意是酸酚pH4.5)::yi戊醇(25:24:1)抽提(10,000rpm,4℃,5 min)
(5)取上清,等体积的yi戊醇(24:1)抽提(10,000rpm,4℃,5 min)
(6)加入1/4V体积10M LiCl溶液,4℃放置6h以上(或过夜)
(7)10,000rpm,4℃离心20min
(8)弃上清,用500ul SSTE溶解沉淀
(9)酚::yi戊醇(25:24:1)抽提两次,:yi戊醇(24:1)抽提1次(10,000rpm,4℃,5min)
(10)加2V体积的无水乙醇,在-70℃冰箱沉淀30min以上
(11)12,000rpm,4℃离心20 min
(12)弃上清.沉淀用70%酒精漂洗一次,干燥
(13)加200ul的DEPC处理水溶解
(14)用非变性琼脂糖凝胶电泳和紫外分光光度计扫描检测RNA的质量(在抽提过程中,若蛋白质含量或其它的杂质还较多,可以增加抽提次数)
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
技术资料暂无技术资料 索取技术资料
Zaltidine
¥600 - 3200









