赛默飞世尔Thermo Fisher X20 Plate h

SDS-PAGE Western Blotting Protocols

glass plate can be treated with Rain-X to facilitate later removal of the gel. 2. Slide into holder without tightening the screws. 3. Place on pouring stand, making sure that the glass plates are pushed all the way to the bottom before tightening

Western Blots

. To transfer in a Biorad transfer cell: Fill the box ~3/4 with transfer buffer. Wet the two brillo pad-like stuffers with transfer buffer. Place one wet stuffer on the black half of the plastic holder, then pick up the glass plate carrying your sandwich, place

RLGS protocol

-11, inner diameter: 2.4 mm) into 65 cm (cut a top at an angle of about 20 degrees) for gel holder. insert it into a glass tube from the bottom, and then a sharp tip of the tubing may exert form the top. Pull out the tip about 2 cm with a plier