相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 供应商:
上海博耀商贸有限公司
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验UPDATED DIRECTIONS FOR NEW BRUNSWICK MOBILE PILOT PLANT FERMENTOR
, contaminating the sterile media. 1. After sterilization and cooldown, increase the airflow until the vessel pressure reaches ~10 psi. 2. Shut down the air service valve at the copper pipe on the wall of the fermentor room. This activates the exhaust
motor)、M3(sampling motor)、M4(suction motor)组成,其中M1为样品盘旋转电机,M2为进样架摆动电机,M3为环形进样器电机,M4为样品进样或清洗吮吸泵电机。 经检查,发现是M4(suction motor)电机没有工作。根据电气控制原理框图可知,M4电机不工作,涉及的环节主要有:限位开关S7、S8的原始状态,继电器板,控制微处理板SC/MP。通过进一步检查得知,S7、S8限位开头工作正常,相应继电器也工作正常,而且SC/MP板相应驱动电路动作正常。但M4通电
Marcantonio Lab Protocol Manual
and plasmid DNA binds less than chromosomal DNA. 4) Insert an 18-G needle gently into the top of the tube. This acts as an air inlet to allow the plasmid DNA band to be drawn out below. 5) Recover plasmid DNA by suction with a syringe and 18-G needle
技术资料暂无技术资料 索取技术资料





