相关产品推荐更多 >

伯乐Bio-RadMSP1001 Microseal® 'P' Reusable PCR Plate Sealing Pads, Microseal® 'P'可重复使用的PCR板密封垫,现货
询价
伯乐Bio-RadMLP4801 Multiplate™ 48-Well PCR Plates, high profile, unskirted, clear, Multiplate™48孔PCR反应板,现货
询价
伯乐Bio-RadMSL2022 Arched Auto-Sealing Lids for PCR Plates, PCR板用拱形自动密封盖,现货
询价
硕华 716145S 0.1ml 96孔PCR板,全裙边,乳白框,乳白管
询价
伯乐Bio-Rad2239441 iQ™ 96-Well PCR Plates, high profile, semi-skirted,iQ™ 96孔PCR板,高剖面,半裙板,现货
询价
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 库存:
大量
- 现货状态:
现货
- 供应商:
北京诺博莱德科技有限公司
我们北京诺博莱德科技有限公司作为伯乐Bio-rad公司的经销商为客户提供,正规进口,保证原装正品,货期稳定,折扣好的服务标准。
伯乐Bio-Rad1814045 PCR Plate Heat Seal, foil, peelable,产品简介:
产品品牌:伯乐Bio-Rad
产品名称:PCR Plate Heat Seal, foil, peelable
产品货号:1814045
产品规格:100/包
伯乐Bio-Rad1814045 PCR Plate Heat Seal, foil, peelable,产品说明:
Pkg of 100, laminate/foil peelable seals for PCR and sample storage, for use with PX1 PCR Plate Sealer
100包,层压/箔可剥离密封,用于PCR和样品储存,与PX1 PCR平板封口机一起使用
选择这种可剥离铝箔密封件用于PCR应用和样品储存。该密封件经验证可与PX1 PCR平板密封件一起使用,在–80℃下储存后可轻易剥离°或在液氮中。
密封完整性从–80到–200°C
中等耐溶剂性
不含DNA酶、RNA酶和人类DNA
建议的热封参数指南可用于帮助最小化不同类型板的优化步骤。
| Films & Foils | Sealing | Optical (qPCR) | Storage, Min Temp | Features/Uses | Catalog Number |
| Microseal 'A' Film | Pressure | — | — | Peelable, low volume PCR. Ideal for sample transport | MSA5001 |
| Microseal 'B' Film | Adhesive | + | –40°C | Peelable, low volume PCR, automated plate handler compatible. Ideal for NGS workflows and qPCR | MSB1001 |
| Microseal 'C' Film | Pressure | + | –70°C | Peelable, raised well rim compatible | MSC1001 |
| Microseal 'F' Foil | Adhesive | — | –80°C | Peelable, pierceable, automated system compatible. High DMSO resistance | MSF1001 |
| Optically Clear Heat Seal§ | Heat Sealer | + | –80°C | Peelable, validated for qPCR | 1814030 |
| Permanent Clear Heat Seal§ | Heat Sealer | — | –80°C | Permanent, water bath cycling, high DMSO resistance | 1814035 |
| Pierceable Foil Heat Seal§ | Heat Sealer | — | –20°C | Pierceable, validated for Droplet Digital PCR, high DMSO resistance | 1814040 |
| Peelable Foil Heat Seal§ | Heat Sealer | — | –200°C | Peelable, liquid nitrogen storage compatible | 1814045 |
产品图片
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验PURIFICATION OF PCR PRODUCTS WITH SEPHAD
. Seal the plates with a 4-inch wide aluminium foil tape and store them in the refrigerator. Prior to use, vortex plate and spin at 4000 rpm for 1 minute. 上一篇:Cloning PCR products using TA vectors 下一篇:Standard multiplex
1. Pull out eight glycerol stock plates from the �80oC freezer and set on bench top to thaw. Be sure to remove the foil seal before leaving the plates to thaw. 2. Master mix: Per 100ul RXN
PURIFICATION OF PCR PRODUCTS WITH SEPHADEX
PURIFICATION OF PCR PRODUCTS WITH SEPHADEX Place the sephadex measuring plate (MultiScreen ?Column Loader) on a clean piece of saran wrap. Pour some sephadex onto the plate
技术资料暂无技术资料 索取技术资料




