Anti-Aquaporin 5; 50 μL

Anti-Aquaporin 5

AQP5

Recognizes Aquaporin 5 (AQP5).

Western Blotting

Western blot: 1:200 - 1:500 using ECL on rat lung membranes and mouse salivary gland.


Immunohistochemistry on rat lung sections.


Dilutions should be made using a carrier protein such as BSA (1-3%)


Optimal working dilutions must be determined by the end user.


SUGGESTED WESTERN BLOT PROTOCOL





1. Mix the samples (organ membranes: 50 μg/lane; transfected cells: 500,000 cells/lane) with sample-buffer X 2, and heat 10 min at 70°C.


2. 5-50 μL applied to Minigel lane (0.75-1.5 mm width) and run at standard conditions. (60 mA for 2 1.5 mm Minigel gels, 1.4 h). It is suggested that you run 5-15% acrylamide (37.5:1 acrylamide:bisacrysmide) minigel (1.5 mm width) at 30 mA/gel ~1-1.5 hours.


3. Transfer in semi-dry system under standard conditions (3 h 100 mA for two minigel gels)


4. Stain the transferred bands with Chemicon BLOT-FastStain (Catalog Number 2076).


5. Destain with deionized water.


6. Block with 5% non-fat milk (Marvel or Carnation) in PBS, and 0.025 % sodium azide, overnight at 2-8°C. The non-fat milk should be dissolved freshly, centrifuged 10,000 rpm for


10 min, and filtered through glass filter (Gelman Acrodisc).


7. Incubation with first antibody 2 h at room temperature or overnight at 4°C in blocking solution. The antibody preparation should be centrifuged before use (10,000 g 5 min.). Optimal working dilutions and incubation time will need to be determined by the end user.


8. Wash 4 x 10 min. with PBS-0.1% tween 20. From this stage, azide should be omitted.


9. Incubation with the secondary antibody (HRP-conjugated goat anti-rabbit antibody, for example Chemicon Catalog Number AP132P, diluted appropriately) 1 h at room temperature.


10. Wash 4 x 10 min. with PBS-0.1% tween 20.


11. Perform ECL with commercial kits (Chemilucent, Chemicon Catalog Number 2600).

• Mouse
• Rat

Purified peptide from amino acids 251-265 of rat AQP5 (Accession number P47864).

Included free of charge with the antibody is 40 μg of control antigen (lyophilized powder). The stock solution of the antigen can be made up using 100 μL of sterile deionized water. For negative control, preincubate 1 μg of peptide with 1 μg of antibody for one hour at room temperature. Optimal concentrations must be determined by the end user.

Affinity purified immunoglobulin. Lyophilized from phosphate buffered saline, pH 7.4, containing 0.025% sodium azide as a preservative. Reconstitute with 50 μL of sterile deionized water. Centrifuge antibody preparation before use (10,000 xg for 5 min).

Maintain lyophilized material at -20°C for up to 12 months after date of receipt. After reconstitution maintain at -20°C in undiluted aliquots for up to 6 months. Avoid repeated freeze/thaw cycles.

• AQP5
• AQP-5
• Aquaporin-5

Neuroscience

Ion Channels & Transporters

Unless otherwise stated in our catalog or other company documentation accompanying the product(s), our products are intended for research use only and are not to be used for any other purpose, which includes but is not limited to, unauthorized commercial uses, in vitro diagnostic uses, ex vivo or in vivo therapeutic uses or any type of consumption or application to humans or animals.

Chemicon (Millipore)

Inflammation

Affinity Purified

Rabbit

0.4 mg/mL (after reconstitution)

Polyclonal Antibody