肠胃H+/K+ATPase抑制剂(Soraprazan) 使用注意事项 1. 微量试剂取用前请离心集液。 2. Annexin V-EGFP,Propidium Iodide(PI)避光保存及使用。 3. Propidium Iodide (PI)有毒,操作时请戴手套。 4. 本试剂盒适用于检测活细胞,流式细胞仪检测时,细胞数量不应低于1×105,,不推荐用于检测组织样本。 5. 推荐使用悬浮培养细胞。如果是贴壁细胞,需用不含EDTA的胰酶消化,如消化不当,可能引起假阳性,而用细胞刮子会造成细胞粘连成团,而影响检测。可将胰酶消化后细胞的保存在含2%BSA的PBS中,防止进一步的损伤。 6. 细胞固定后可能导致荧光的淬灭,请不要固定样品。 7. 因检测细胞的类型、凋亡诱导剂种类、使用的检测仪器不同,因而流式检测的荧光补偿也不同,因此建议每次检测均需使用未经凋亡诱导处理的细胞作为对照,进行荧光补偿的调节。 使用说明 1. 细胞的增殖和细胞毒实验,一般可在96孔细胞培养板中进行。 2. 每孔加入100微升细胞悬液。细胞的数量取决于实验目的和培养时间。增殖实验每孔通常加入103个以上数量的细胞;细胞毒性实验每孔至少加入5x103个或以上数量的细胞(具体每孔所用的细胞的数目,需根据细胞的大小,细胞增殖速度的快慢等因素确定)。 3. 接种的细胞按照实验需要,送入细胞培养箱进行培养。增殖实验通常要给予0-10微升特定的药物或生长因子进行刺激。细胞毒实验通常要给予0-10微升抑制因子或细胞毒药物; 4.培养结束后,每孔加入20微升MTT溶液,在细胞培养箱内继续孵育3-6小时; 5.孵育结束后,每孔加入100微升Formanzan溶解液,在37℃细胞培养箱内再继续孵育,直至在镜下观察formazan全部溶解。通常37℃孵育4小时左右,紫色结晶会全部溶解。如果紫色结晶较小较少,溶解的时间会短一些。如果紫色结晶较大较多,溶解的时间会略长。 6. 在570nm测定吸光度。如无570nm滤光片, 560-600nm范围的滤光片均可使用。 C3/C3b rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, IHC包装:100 ul DDB1 rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, WB, IHC包装:100 ul CPT2 rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, IHC 包装:100 ul RPF2 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, WB包装:100 ul ARL3 rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, WB包装:100 ul SENP6 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, WB包装:100 ul BTBD6 rabbit polyclonal antibody反应物种:Human, Mouse测试范围:ELISA, WB, IHC包装:100 ul BBS12 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, IHC包装:100 ul FUT3 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, IHC包装:100 ul SLC40A1 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, IHC包装:100 ul CEBPD rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, WB包装:100 ul AP1B1 rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, IHC包装:100 ul YTHDF1 rabbit polyclonal antibody反应物种:Human, Mouse测试范围:ELISA, IHC包装:100 ul ZBTB40 rabbit polyclonal antibody反应物种:Human测试范围:ELISA, IHC包装:100 ul FER rabbit polyclonal antibody反应物种:Human, Mouse, Rat测试范围:ELISA, IHC包装:100 ul 肠胃H+/K+ATPase抑制剂(Soraprazan) 中文名称 膜相关磷脂转运蛋白抗体 别 名 membrane-associated 3; CORD5; Membrane associated phosphatidylinositol transfer protein 3; Membrane-associated phosphatidylinositol transfer protein 3; NIR 1; NIR-1; NIR1; Phosphatidylinositol transfer protein; Phosphatidylinositol transfer protein, membrane-associated 3; PITM3_HUMAN; PITPnm 3; PITPNM; PITPNM family member 3; Pitpnm3; PYK2 N terminal domain interacting receptor 1; PYK2 N-terminal domain-interacting receptor 1; RDGBA3; retinal degeneration B alpha 3. 浓 度 1mg/1ml 规 格 0.2ml/200μg 抗体来源 Rabbit 克隆类型 polyclonal 交叉反应 Human, Mouse, Rat, Pig, Cow, Horse 产品类型 一抗 研究领域 细胞生物 免疫学 神经生物学 信号转导 转录调节因子 转运蛋白 蛋白分子量 predicted molecular weight: 106kDa 性 状 Lyophilized or Liquid 免 疫 原 KLH conjugated synthetic peptide derived from human NIR1/RDGBA3 亚 型 IgG 纯化方法 affinity purified by Protein A 储 存 液 Preservative: 15mM Sodium Azide, Constituents: 1% BSA, 0.01M PBS, pH 7.4 产品应用 WB=1:100-500 ELISA=1:500-1000 IP=1:20-100 IHC-P=1:100-500 IHC-F=1:100-500 IF=1:50-200 (石蜡切片需做抗原修复) not yet tested in other applications. optimal dilutions/concentrations should be determined by the end user. 保存条件 Store at -20 °C for one year. Avoid repeated freeze/thaw cycles. The lyophilized antibody is stable at room temperature for at least one month and for greater than a year when kept at -20°C. When reconstituted in sterile pH 7.4 0.01M PBS or diluent of antibody the antibody is stable for at least two weeks at 2-4 °C. Important Note This product as supplied is intended for research use only, not for use in human, therapeutic or diagnostic applications.