万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件:
-20°C, sealed storage, away from moisture and light
- 英文名:
FJ-776
- 库存:
货期:1-2天
- 供应商:
MedChemExpress LLC
- CAS号:
147366-41-4
- 规格:
10 mM * 1 mL/1 mg/5 mg/10 mg/50 mg/100 mg
| 规格: | 10 mM * 1 mL | 产品价格: | ¥1100.0 |
|---|---|---|---|
| 规格: | 1 mg | 产品价格: | ¥419.0 |
| 规格: | 5 mg | 产品价格: | ¥1000.0 |
| 规格: | 10 mg | 产品价格: | ¥1800.0 |
| 规格: | 50 mg | 产品价格: | ¥5000.0 |
| 规格: | 100 mg | 产品价格: | ¥6500.0 |
MCE 的所有产品仅用作科学研究或药证申报,我们不为任何个人用途提供产品和服务。
MKT-077
CAS No. : 147366-41-4
MCE 国际站:MKT-077
产品活性:MKT-077 (FJ-776) 是一种高水溶性线粒体染料,具有显著的抗肿瘤活性。MKT-077 的细胞毒性低,对广谱人癌细胞系 (结肠癌、乳腺癌、胰腺癌) 有抑制活性。MKT-077 可抑制裸鼠异植肿瘤模型的肿瘤生长。其荧光波长:Ex/Em=488/543 nm。
研究领域:Others | Cell Cycle/DNA Damage | Metabolic Enzyme/Protease
作用靶点:Fluorescent Dye | HSP
In Vitro: Preparation of MKT-077 solution
1.1 Preparation of the stock solution
Dissolve 1 mg MKT-077 in 0.2315 mL DMSO to obtain 10 mM of MKT-077 .
Note: It is recommended to store the stock solution at -20 °C -80 °C away from light and avoid repetitive freeze-thaw cycles.
1.2 Preparation of MKT-077 working solution
Dilute the stock solution in serum-free cell culture medium or PBS to obtain 5-10 μM of MKT-077 working solution.
Note: Please adjust the concentration of MKT-077 working solution according to the actual situation.
Cell staining
2.1 Cell preparation.
For suspension cells: Centrifuge at 1000 g at 4°C for 3-5 minutes and then discard the supernatant. Wash twice with PBS, 5 minutes each time.
For adherent cells: Discard the cell culture medium, and add trypsin to dissociate cells to make a single-cell suspension. Centrifuge at 1000 g at 4°C for 3-5 minutes and then discard the supernatant. Wash twice with PBS, 5 minutes each time.
2.2 Add 1 mL of MKT-077 working solution, and then incubate at room temperature for 30 minutes.
2.3 Centrifuge at 400 g at 4°C for 3-4 minutes and then discard the supernatant.
2.4 Wash twice with PBS, 5 minutes each time.
2.5 Resuspend cells with serum-free cell culture medium or PBS, and then detect by fluorescence microscope or flow cytometer.
In Vivo: Systemic administration of MKT-077 significantly delays the growth of TT xenografts in mice throughout the treatment. At the end of MKT-077 treatment, it is found that tumor weights are about two-times less in MKT-077-treated group than in control group. MKT-077 treatment also results in weight loss and general toxicity in animals. Results show that the succinate-induced, ADP-stimulated respiratory rate in mitochondria isolated from the liver of rats treated with a bolus i.v. injection of 15 mg MKT-077 1kg body weight each day for 5 days is significantly lower than that of untreated controls.
相关产品:Tamoxifen | MitoSOX Red | BODIPY 493/503 | Palmitic acid | Nile Red | Polyinosinic-polycytidylic acid | D-Luciferin potassium | JC-1 | FITC | Propidium Iodide | CFDA-SE | FITC-Dextran (MW 4000) | Tanespimycin | Dihydroethidium | DiR | Calcein-AM | Thiazolyl Blue | 2-NBDG | DiI | Fluo-4 AM | TMRE | VER-155008 | Geldanamycin | Cy5.5 | Indocyanine green | Acridine Orange hydrochloride | CY5
热门产品线:重组蛋白 | 化合物库 | 天然产物 | 荧光染料 | PROTAC | 同位素标记物
Trending products:Recombinant Proteins | Bioactive Screening Libraries | Natural Products | Dye Reagents | PROTAC | Isotope-Labeled Compounds
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验Ficoll:一种已灭菌的,特定密度的密度梯度离心介质。被广泛用作从外周血、骨髓及脐带血中分离高活性的单个核细胞。 Ficoll-Paque溶液包含: Ficoll PM400:由高分子量蔗糖(Mr 400K)聚合物与表氯醇聚合合成(凝集红细胞) 泛影酸钠:使溶液在低粘度下具有高密度 EDTA二钠钙 Ficoll的保存:开盖前保存在4℃~30℃(避光),开盖后保存在 4℃~8℃(避光) Ficoll 产品细分如下: 使用Ficoll (1.077g/ml) 分离
人外周血PBMC的制备流程 收集抗凝人外周血,用 1640 无血清培养基或 PBS 按照 1:1 的比例稀释,上下颠倒混匀或者用移液枪吹打混匀。 在 15 mL 离心管中,先加入 3 mL 充分混匀的 Ficoll 液(1.077 g/mL),再沿着管壁缓慢加入2 mL稀释后的血液,血液和 Ficoll 液分层明显为成功。 注:Ficoll 提前半小时从 4℃ 冰箱取出恢复到室温,温度过高会导致分离不明显,温度过低会导致密度过大,同样分离效果不好, 20~25℃ 最佳。。 将样本小心转移
的神经元的质量。为了克服这些,笔者查了一些文献,经过反复测试采用了nycoprep低转速密度-梯度离心。现在这个梯度溶液已经被公司升级为optiprep.稀释时候,NycoPrep? 1.077 推荐稀释成 60%,就用刚才悬浮细胞的培养液来配置。注意:1.077被广泛应用于血液中分离血细胞,如果你拿到的nycoprep(optiprep)不是1.077,那么请换算一下稀释度)值得注意的是,皮层和海马可能需要的稀释度稍微有不同。一般来说,一个10ml梯度离心管中,2-4ml稀释过的梯度液体就够用
技术资料暂无技术资料 索取技术资料

















