产品封面图

Eppendorf ThermoMixer® C 恒温混匀仪

5382000074
收藏
  • ¥44172
  • Eppendorf
  • 5382000074
  • 德国
  • 2025年10月26日
    avatar
  • 企业认证

    点击 QQ 联系

    • 详细信息
    • 询价记录
    • 文献和实验
    • 技术资料
    • 保修期

      1年

    • 现货状态

      现货

    • 供应商

      Eppendorf

    • 规格

      5382000074

    Eppendorf ThermoMixer® C, 主机,不含 Eppendorf 可更换式加热模块, 220 – 240 V/50 – 60 Hz (CN)货号 5382000074
    目录价格
    ¥ 44,172.00
     

    产品信息

    您的需要,应有尽有。 Eppendorf ThermoMixer C 舒适型恒温混匀仪具备绝佳的混匀和温控性能,可以确保完整的、可靠的和可重复的实验结果。 ThermoMixer C 可同时混匀和孵育样品,也有助于获得准确的实验结果。 Eppendorf ThermoMixer C 舒适型恒温混匀仪适配一系列可更换式 SmartBlocks 加热模块,灵活适用于市面上通用的各种样品管和工作板。另外,强大的程序设置功能和各种混匀频率的高度稳定性。 满足实验室各类应用!

    Facing irregular mixing results?


    Reliable sample mixing is far beyond simple mixing, especially when talking about microliter volumes. After decades of offering mixing devices, we found a way to expand reliable mixing performance to the microliter scale:

    Eppendorf ThermoMixer® C

    2DMix–Control

    独有的 2DMix–Control 二维混匀操控技术对液体进行可控的、圆周的混匀运动。具备足够的混匀能力来应对各种高挑战的混匀任务。对于不同的样品管尺寸或样品属性,MixMate 都能在1 分钟 内进行有效地混匀。

    Eppendorf ThermoMixer® C

    Using different vessel formats?


    A wide varity of Eppendorf SmartBlocks are available for the Eppendorf ThermoMixer C. These thermoblocks offer the utmost flexibility for use of all common vessel and plate formats.

    › Fast and simple block exchange due to Eppendorf QuickRelease 
    › Optimized block design guarantees maximum temperature transfer to the sample 
    › Individually sensor‐controlled Eppendorf SmartBlocks allow for block‐specific calibration"

    Eppendorf ThermoMixer® C

    Eppendorf ThermoTop® 热盖condens.protect®


    › 现在一手掌控您的样本温度:ThermoTop热盖,具备独特的 condens.protect 防冷凝保护技术,有效防止在管盖和管壁产生冷凝水。有效防止在管盖和管壁上形成冷凝水 
    › 确保最佳反应条件和反应结果,提高实验重复性 
    › 增加工作效率,孵育终止后无需离心 
    › 适用于 Eppendorf SmartBlocks 0.5/1.5 和 2.0 mL、 Eppendorf SmartBlocks 工作板和 96孔PCR板 &384孔 PCR板 – 具有 condens.protect® 标识

    Eppendorf ThermoMixer® C

    Annoyed by uncomfortable handling?


    Ergonomics is far beyond the »ergonomically designed chair«. Eppendorf started to optimize the laboratory devices regarding ergonomics already in the early 1970s.
    In 2003, we started the PhysioCare Concept, focusing on ergonomic liquid handling devices like our pipettes.
    Nowadays, the Eppendorf PhysioCare Concept is broaden up to include further laboratory products as a holistic solution to harmonize the workflow in your laboratory with your health and well-being, e.g. for the Eppendorf ThermoMixer:
    › Eppendorf QuickRelease for easy and fast block exchange 
    › Insulated SmartBlock for safe gripping / no burning of fingers 
    › Direct keys for convenient handling 
    › Small footprint to enable position in direct arm reach at your bench 
    › Standardized »user-interface concept« for intuitive handling of devices 

    Further information about the Eppendorf PhysioCare Concept: 
    www.eppendorf.com/physiocare/

    Eppendorf ThermoMixer® C

    产品特性

    • 使用一台设备进行混合、加热和冷却,具有高度灵活性
    • 提供不同 Eppendorf SmartBlocks™,支持标准应用的所有 5 µL 至 50 mL 常见离心管和工作板
    • 优越的 2DMix-Control 技术可获得极佳的样品混匀结果
    • 可靠的防溅射技术,防止管盖润湿和交叉污染
    • 混匀频率可增加至高达 3,000 rpm,有效进行样品混匀
    • 卓越的温控管理,确保温度的准确性,操作更安全
    • 兼容 Eppendorf ThermoTop® (condens.protect®),样品处理时无凝结(适用于 Eppendorf SmartBlocks 多达 2.0 mL)
    • 预置程序按键和合理的菜单设计,可实现简单而直观的操作
    • 为个体优化提供自由可编程程序按键
    • Eppendorf PhysioCare Concept® 提供了人体工学设计和操作

    应用

    • 质粒/RNA/DNA 纯化
    • cDNA 合成
    • 从琼脂糖凝胶回收DNA 片段
    • 酶反应(如 DNA 限制性酶切、蛋白酶 K 消化和连接)
    • 细菌株和质粒的转化
    • DNA、RNA和蛋白质的变性
    • DNA、RNA和蛋白质的标记
    • 微量反应管、锥形管或深孔板中细菌生长
    • 100 °C下的裂解反应
    • PCR反应体系的混匀
    Eppendorf ThermoMixer® C
    振幅 3 mm
    最低和最高温度设定 1 °C/100 °C
    最大温度控制范围 100 °C
    最大速度 3,000 rpm2
    最小温度控制范围 15 °C
    混匀频率 300 – 3,000 rpm1
    混合和漩涡半径 1.5 mm
    温控准确性 最大 ±0.5 °C ,20 – 45 °C之间
    定时器 15 秒至99:30 小时, 可连续运行
    升温速率 最大 7 °C/分钟(当使用工作板 SmartBlock 时),1
    冷却速率 最大 2.5 °C/分钟,100 °C 和室温之间
    接口 USB 接口
    电源 220 – 240 V, 50 – 60 Hz
    最大能耗 200 W
    尺寸 (W × D × H) 20.6 × 30.4 × 13.6 cm
    重量(不含附件) 6.3 kg
    温度范围 最低:室温以下15 °C , 最高:100 °C3
    1取决于所使用的 SmartBlock 加热模块
    2取决于所使用的SmartBlock 加热模块
    3,取决于所使用的SmartBlock 加热模块
    配件
    .
    Eppendorf 96 孔 PCR 板 SmartBlock™加热模块, 适用于 96 孔 PCR 板 的加热模块, 包括盖子货号 5306000006
    目录价格
    ¥ 12,712.00

    .
    Eppendorf 384 孔 PCR 板 SmartBlock™加热模块, 适用于 384 孔 PCR 板 的加热模块, 包括盖子货号 5307000000
    目录价格
    ¥ 12,712.00

    .
    Eppendorf ThermoTop®, 具备 condens.protect® 防冷凝保护技术货号 5308000003
    目录价格
    ¥ 8,063.00

    .
    Eppendorf SmartBlock™ 5 mL, 适用于 8 个 Eppendorf Tubes®5.0 mL 离心管的加热模块, 可放置 8 × 5.0 mL 反应管货号 5309000007
    目录价格
    ¥ 9,036.00

    .
    Eppendorf SmartBlock™ DWP 1000, 适用于 Eppendorf 96 孔/1,000 µL 深孔板 的加热模块, 包括盖子货号 5310000002
    目录价格
    ¥ 12,729.00

    .
    Eppendorf SmartBlock™ DWP 500, 适用于 Eppendorf 96 孔/500 µL 深孔板 的加热模块, 包括盖子货号 5316000004
    目录价格
    ¥ 12,729.00

    .
    Eppendorf SmartBlock™ 1.5 mL, 适用于 24  个 1.5  mL 样品管的加热模块,包括 转移管架 1.5/2.0 mL货号 5360000038
    目录价格
    ¥ 9,132.00

    .
    Eppendorf SmartBlock™ 0.5 mL, 适用于 24  个 0.5  mL 样品管的加热模块,包括 转移管架 0.5 mL货号 5361000031
    目录价格
    ¥ 9,132.00

    .
    Eppendorf SmartBlock™ 2.0 mL, 适用于 24  个 2.0  mL 样品管的加热模块,包括 转移管架 1.5/2.0 mL货号 5362000035
    目录价格
    ¥ 9,132.00

    .
    Eppendorf 工作板 SmartBlock™加热模块, 适用于微孔板和深孔板的加热模块,带盖货号 5363000039
    目录价格
    ¥ 12,729.00

    .
    Eppendorf SmartBlock™, 用于 Eppendorf ThermoMixer®F0.5/F1.5/F2.0 和 FP, Eppendorf SmartBlock™ 0.5 – 2.0 mL 反应管、工作板、96 孔 PCR 板、384 PCR 板和深孔板 (DWP)货号 5363000233
    目录价格
    ¥ 2,190.00

    .
    Eppendorf 12  mm SmartBlock™ 加热模块, 用于 24  个反应管的加热模块, 直径达 12 mm,高 35 mm – 76 mm货号 5364000024
    目录价格
    ¥ 12,729.00

    .
    Eppendorf SmartBlock™ 50 mL, 适用于 4 个  50  mL 锥形管的加热模块货号 5365000028
    目录价格
    ¥ 9,228.00

    .
    Eppendorf SmartBlock™ 15 mL, 适用于 8 个  15  mL 锥形管的加热模块货号 5366000021
    目录价格
    ¥ 9,228.00

    .
    Eppendorf 冻存管 SmartBlock™加热模块, 适用于 24 个冻存管的加热模块, 1.5  mL – 2  mL,最大外径 12.5  mm,适合各种底部形状的试管货号 5367000025
    目录价格
    ¥ 9,228.00

     

    风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。

    • 作者
    • 内容
    • 询问日期
    图标文献和实验
    相关实验
    • 从单个小鼠肿瘤样本中分选高纯度、高活性 TIL 细胞亚群的完整工作流程

      细胞首先通过 CD45 磁珠和 autoMACS®全自动磁性细胞分选仪 被分离出来。 3. 流式细胞分选 MACSQuant® Tyto® 是配备三个激光器的台式流式细胞分选,可实现多参数分选,并提供分选 TIL 亚群所需的灵活性。使用 MACSQuant Tyto,通过对同一样本的两轮分选,从 CD45+TIL 细胞中分选出两个 TIL 细胞亚群:第一类(NK 细胞):CD45+CD11b-, 抗 NKp46+;第二类(B 细胞):CD45+CD11b-,抗 NKp46-, CD

    • Milli-Q讲堂 | 水质对钙检测的影响

      3.细菌的污染作用 在那些已经使用了多重纯化技术的设备中,水中的离子或有机物浓度已经不是钙检测的主要原因了。因此,必须考虑另一种污染物:细菌,在某些条件下,细菌能够迅速生长和繁衍。这些条件通常在临床生化中存在:加热(生化内温度30-40°C),营养成分(试剂)和大量适合生长的场所(阀门、针头、管道、泵等)。 在一些加样针和样品探针中,细菌数量往往高达 105 至 106 CFU / mL。在这样高的水平下,由细菌释放的蛋白质和小分子有机酸(即草酸,柠檬酸)可以与钙结合并改变给药浓度。 值得

    • 目的基因片段的PCR扩增与克隆

      片段,用DNA回收试剂盒回收。 2.用E.Z.N.A.GelExtractionKit进行回收 a)用0.8%琼脂糖凝胶电泳分离DNA片段,在紫外灯下切取目的片段,放入Eppendorf管。并称重。 b)每管加入等体积的Bindingsolution(约100μl/0.1g),60℃水浴7min至凝胶完全融化,其间温和地混合几次。 c)在Hind®DNAspin中加入700μlDNA/琼脂糖混合液。室温下,10,000rpm,离心3min,去上清。若DNA/琼脂糖混合液体积大于700μl,每次取

    图标技术资料

    暂无技术资料 索取技术资料

    同类产品报价

    产品名称
    产品价格
    公司名称
    报价日期
    ¥42869
    上海辅泽商贸有限公司
    2025年10月26日询价
    询价
    杭州柏恒科技有限公司
    2026年02月03日询价
    询价
    本生(天津)健康科技有限公司
    2025年07月15日询价
    询价
    赛默飞中国实验室产品事业部
    2026年02月03日询价
    询价
    埃克森(北京)科技有限公司
    2025年07月12日询价
    Eppendorf ThermoMixer® C 恒温混匀仪 5382000074
    ¥44172