手机验证
密理博纯水/超纯水一体机|Mi
lli-Q Integral 3/5/10/15上海金甚
1年
电话:4006-400-850
QQ:2885367975
Milli-Q® Integral is a unique combination of optimized water purification and monitoring technologies. It allows, in a single device, both pure (Type 2) and ultrapure (Type 1) water to be produced directly from potable water. This all-in-one concept offers several benefits:
To reach the most reliable ultrapure water quality, Milli-Q® Integral is built on an optimized purification sequence:
Elix® | First, Elix® pure water is produced from tap and delivered through the E-POD® (Elix®-Point-Of-Delivery) remote dispenser. To ensure a consistent source of high quality pure water, the patented Elix® module (EDI technology) is combined with Progard® complete pretreatment, intelligent reverse osmosis and bactericidal UV lamp technologies. Depending on daily volume needs, different production flow rates are available (3, 5, 10 & 15 L/h).
Storage | Pure water is then stored in a polyethylene storage tank, which has been designed to maintain consistent purity of stored water. The vent filter provides effective protection against airborne contaminants and the ASM, Automatic Sanitization Module, prevents biofilm formation. Water is then further processed by the Milli-Q® Integral to produce ultrapure water or it can be sent by a distribution pump to feed instruments such as a glassware washing machine.
Milli-Q® | To obtain Milli-Q water quality, purified water passes through a long-life dual wavelength UV lamp, which ensures organic molecule degradation by photooxidation. The Quantum® polishing cartridge then removes the remaining ionic and organic contaminants below trace levels. Finally, the ultrapure water recirculates through a loop to the Q-POD® (Quality-Point-Of-Delivery) dispenser, where an Application-Pak removes specific contaminants critical for experiments – Ultrapure water free of particulates, bacteria, pyrogens, nucleases, proteases, VOCs, endocrine disruptors and organics for LC.
Made only for Milli-Q® systems, Jetpore® virgin ion-exchange resin is used in all Milli-Q® purification cartridges. Selected for its exceptional performance, it can capture even the most weakly charged ions due to its kinetic capabilities. Both the Progard® and Quantum® cartridges incorporate RFID technology. This provides instant visibility on cartridge parameters and also ensures a safe & optimal performance of your system, giving you full traceability.
The Q-POD® and E-POD® dispensers simplify operation and display essential data in an easy-to-use and compact device.
The combination of both resistivity and Total Organic Carbon (TOC) monitoring allows control over both ionic and organic contaminants that can impact research results. Calibrated meters are used to measure the quality of ultrapure water.
For full confidence in your Milli-Q® Integral system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and aCertificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. In addition all Milli-Q®consumables are delivered with their Certificate of Quality. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.
A complete range of Services, including Validation support, is provided by certified Field Service Engineers using calibrated equipment and Qualification Workbooks. Millitrack® Compliance e-Solution has been designed specifically for the pharmaceutical, biotech and contract labs that follow GxP regulations (GLP, GCP, or cGMP regulations). Activation of Millitrack® Compliance software combined with Qualification Services will enable full water purification system compliance with record saving, electronic signature and auditing criteria guidelines such as those of FDA Title 21 CFR Part 11 or similar requirements set by other global regulatory organizations. A report on conformity of Milli-Q® Integral water quality to Type 1 water quality as described by ASTM®, ISO® 3696 and CLSI®norms, and to Purified Water as described in USP and EP is available upon request.
“It was the only choice I was interested in for the Center. With the Integral system, we can get two forms of water from one source — that allows us to accommodate all users.”
Nathanial Hentz, Biomanufacturing Training and Education Center (BTEC), North Carolina State University, Raleigh, North Carolina, U.S.A.
“For a pharmaceutical company like Tillotts, it goes without saying that our water quality has to meet very specific high standards, which is one of the reasons we use the Milli-Q® Integral system. The system’s POD water dispensers are another real “plus” for us — they have a clear, clean design, and they’re very easy to use. With the Millipak® Application Pak we get bacteria-free and particulate-free ultrapure water in the volumes we need.”
Mr. Daniel Bootz, Tillotts Pharma AG, Ziefen, Switzerland.
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。