产品封面图

大鼠总抗氧化能力(TAOC)ELISA试剂盒

收藏
  • 询价
  • qybio
  • 0.1 nmol/L - 4 nmol/L
  • 上海
  • 99033
  • 2025年11月10日
    avatar
  • 企业认证

    点击 QQ 联系

    • 详细信息
    • 文献和实验
    • 技术资料
    • 库存

      6325

    • 供应商

      齐一生物

    • 检测范围

      0.1 nmol/L - 4 nmol/L

    • 检测方法

      ELISA

    • 应用

      科研检测

    • 标记物

      见说明

    • 样本

      血液.血浆.组织

    大鼠总抗氧化能力(TAOC)ELISA试剂盒FOR RESEARCH USE ONLY
    Rat malondialchehyche
    Drug Names
    Generic Name:Rat malondialchehyche (MDA) ELISA Kit.
    Purpose
    This kit allows for the determination of MDA concentrations in Rat
    serum,Tissue, cell culture supernatant and other biological fluids.
    Principle of the assay
    The kit assay Rat MDA level in the sample,use Purified Rat MDA to coat
    microtiter plate wells, make solid-phase antibody, then add MDA to wells,
    Combined MDA antibody which With HRP labeled, become antibody - antigen
    - enzyme-antibody complex, after washing Completely, Add TMB substrate
    solution,TMB substrate becomes blue color At HRP enzyme-catalyzed,
    reaction is terminated by the addition of a sulphuric acid solution and the color
    change is measured spectrophotometrically at a wavelength of 450 nm. The
    concentration of MDA in the samples is then determined by comparing the O.D.
    of the samples to the standard curve.5
    Materials provided with the kit
    Materials provided
    with the kit
    48determinations 96 determinations
    Stora
    ge
    User manual 1 1
    Closure plate
    membrane
    2 2
    Sealed bags 1 1
    Microelisa stripplate 1 1 2-8℃
    Standard:5.4nmol/L 0.5ml×1 bottle 0.5ml×1 bottle 2-8℃
    Standard diluent 1.5ml×1 bottle 1.5ml×1 bottle 2-8℃
    HRP-Conjugate
    reagent
    3ml×1 bottle 6ml×1 bottle 2-8℃
    Sample diluent 3ml×1 bottle 6ml×1 bottle 2-8℃
    Chromogen Solution
    A 3ml×1 bottle 6ml×1 bottle 2-8℃
    Chromogen Solution
    B 3ml×1 bottle 6ml×1 bottle 2-8℃
    Stop Solution 3ml×1 bottle 6ml×1 bottle 2-8℃
    wash solution
    (20ml×20 fold)
    ×1bottle
    (20ml×30 fold)
    ×1bottle
    2-8℃
    Specimen requirements
    1. serum- coagulation at room temperature 10-20 mins, centrifugation 20-min
    at the speed of 2000-3000 r.p.m. remove supernatant, If precipitation
    appeared, Centrifugal again.
    2. plasma-use suited EDTA or citrate plasma as an anticoagulant,mix 10-20
    mins ,centrifugation 20-min at the speed of 2000-3000 r.p.m. remove
    supernatant, If precipitation appeared, Centrifugal again.
    3. Urine-collect sue a sterile container, centrifugation 20-min at the speed of
    2000-3000 r.p.m. remove supernatant, If precipitation appeared,
    Centrifugal again. The Operation of Hydrothorax and cerebrospinal fluid
    Reference to it.
    4. cell culture supernatant-detect secretory components, collect sue a
    sterile container, centrifugation 20-min at the speed of 2000-3000 r.p.m.
    remove supernatant,detect the composition of cells, Dilut cell suspension6
    with PBS(PH7.2-7.4), Cell concentration reached 1 million / ml, repeated
    freeze-thaw cycles, damage cells and release of intracellular components,
    centrifugation 20-min at the speed of 2000-3000 r.p.m. remove supernatant,
    If precipitation appeared, Centrifugal again.
    5. Tissue samples- After cutting samples, check the weight,add PBS
    (PH7.2-7.4), Rapidly frozen with liquid nitrogen, maintain samples at
    2-8℃ after melting,add PBS(PH7.4), Homogenized by hand or Grinders,
    centrifugation 20-min at the speed of 2000-3000 r.p.m. remove
    supernatant.
    6. extract as soon as possible after Specimen collection,and according to the
    relevant literature, and should be experiment as soon as possible after the
    extraction. If it can’t, specimen can be kept in -20 ℃ to preserve, Avoid
    repeated freeze-thaw cycles.
    7. Can’t detect the sample which contain NaN3, because NaN3 inhibits HRP
    active.
    Assay procedure
    1.Dilute and add sample to Standard: set 10 Standard wells on the ELISA
    plates coated, add Standard 100μl to the first and the second well, then add
    Standard dilution 50μl to the first and the second well, mix; take out 100μl
    form the first and the second well then add it to the third and the forth well
    separately. then add Standard dilution 50μl to the third and the forth
    well ,mix ; then take out 50μl from the third and the forth well discard, add
    50μl to the fifth and the sixth well ,then add Standard dilution 50μl to the fifth
    and the sixth well, mix ; take out 50μl from the fifth and the sixth well and add
    to the seventh and the eighth well, then add Standard dilution 50μl to the
    seventh and the eighth well ,mix ; take out 50μl from the seventh and the
    eighth well and add to the ninth and the tenth well, add Standard dilution 50μl
    to the ninth and the tenth well, mix , take out 50μl from the ninth and the tenth
    well discard(add Sample 50μl to each well after Diluting ,(density: 3.67
    nmol/L,2.4 nmol/L ,1.2 nmol/L,0.6 nmol/L , 0.3 nmol/L)
    2.add sample:Set blank wells separately (blank comparison wells don’t add
    sample and HRP-Conjugate reagent, other each step operation is same).
    testing sample well. add Sample dilution 40μl to testing sample well, then add
    testing sample 10μl (sample final dilution is 5-fold), add sample to wells ,
    don’t touch the well wall as far as possible, and Gently mix.
    3.Incubate: After closing plate with Closure plate membrane ,incubate for 30
    min at 37℃.
    4.Configurate liquid: 30-fold (or 20-fold)wash solution diluted 30-fold (or 20-fold)
    with distilled water and reserve.
    5.washing:Uncover Closure plate membrane, discard Liquid, dry by swing,
    add washing buffer to every well, still for 30s then drain, repeat 5 times, dry by
    pat.
    6.add enzyme:Add HRP-Conjugate reagent 50μl to each well, except blank
    well.
    7.incubate:Operation with 3.
    8.washing:Operation with 5.
    9.color:Add Chromogen Solution A 50ul and Chromogen Solution B to each
    well, evade the light preservation for 15 min at 37℃
    10.Stop the reaction: Add Stop Solution50μl to each well, Stop the reaction(the
    blue color change to yellow color).
    11.assay:take blank well as zero , Read absorbance at 450nm after Adding
    Stop Solution and within 15min.
    大鼠总抗氧化能力(TAOC)ELISA试剂盒Important notes
    1. The kit takes out from the refrigeration environment should be balanced
    15-30 minutes in the room temperature, ELISA plates coated if has not use
    up after opened, the plate should be stored in Sealed bag.
    2. washing buffer will Crystallization separation, it can be heated the water
    helps dissolve when dilute . Washing does not affect the result.8
    3. add Sample with sampler Each step, And proofread its accuracy frequently,
    avoids the experimental error. add sample within 5 mins, if the number of
    sample is much , recommend to use Volley .
    4. if the testing material content is excessively higher (The sample OD is
    bigger than the first standard well ),please dilute Sample (n-fold), Please
    diluente and multiplied by the dilution factor.(×n×5).
    5. Closure plate membrane only limits the disposable use, to avoid
    cross-contamination.
    6. The substrate evade the light preservation.
    7. Please according to use instruction strictly, The test result determination
    must take the microtiter plate reader as a standard.
    8. All samples, washing buffer and each kind of reject should according to
    infective material process.
    9. Do not mix reagents with those from other lots.
    Calculate
    大鼠总抗氧化能力(TAOC)ELISA试剂盒Assay range
    0.1 nmol/L - 4 nmol/L
    Take the standard density as the horizontal,
    the OD value for the vertical ,draw the standard
    curve on graph paper, Find out the corresponding
    density according to the sample OD value by the
    Sample curve, multiplied by the dilution multiple,
    or calculate the straight line regression equation
    of the standard curve with the standard density
    and the OD value ,with the sample OD value in
    the equation, calculate the sample density,
    multiplied by the dilution factor, the result is the
    This chart for reference only9
    Storage and validity
    1.Storage: 2-8℃.
    2.validity: six months.

    风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。

    图标文献和实验
    相关实验
    • 一氧化氮、总抗氧化能力大鼠隐睾生殖细胞凋亡的影响

      摘要 :   目的: 探讨一氧化氮(nitric oxide , NO) 、总抗氧化能力(total antioxide capacity , T2AOC) 对大鼠隐睾生殖细胞凋亡的影响。  方法: 健康SD 雄性大鼠20 只,日龄22 d 时复制单侧隐睾模型。生物素2dUTP/ 酶标亲和素测定法检测睾丸生殖细胞凋亡,采用硝酸还原酶法测定睾丸组织中NO 含量,化学比色法测定睾丸组织中T2AOC

    • 小鼠总抗氧化能力的测定

      的测定方法。 2.观察血虚小鼠模型总抗氧化能力的变化。 3.观察中药对血虚小鼠模型总抗氧化能力的影响。 三、材料和方法 1.试剂:总抗氧化能力测定试剂盒(南京建成生物工程研究所) 2.材料:EF管(1.5ml) 120 支,一次性试管(10ml)60支,移液器(P20ul、P100ul 、P1000ul)各2把及配套枪头各200支,玻璃比色

    • Oxford Biomedical Research的氧化应激及慢性炎症生物标志物检测

      醛酸结合,个体间葡萄糖醛酸化的范围很大,为28-80%。因此,尿液样品要用β-葡糖醛酸酶预处理,使研究者区分个体间葡萄糖醛酸化的差异并检测系统异前列烷。   样品用葡糖醛酸酶处理对尿样中F2-异前列烷浓度检测的影响。6个人尿样混合后,分2部分。一部分掺入10 ng/ml合成的15-F2t-异前列烷。样品用或不用葡糖醛酸酶预处理得到的数据。 三、更多氧化应激研究用产品: 1.  总抗氧化能力检测试剂盒,货号TA02,96孔板:赛默飞世尔的一份应用

    图标技术资料

    暂无技术资料 索取技术资料

    同类产品报价

    产品名称
    产品价格
    公司名称
    报价日期
    ¥800
    上海彩佑实业有限公司
    2025年07月12日询价
    ¥500
    武汉纯度生物科技有限公司
    2025年07月11日询价
    询价
    蒂科(上海)生物科技有限公司
    2025年09月12日询价
    ¥1200
    上海晶风生物科技有限公司
    2025年07月15日询价
    ¥1600
    瑟瑞娜生命科学技术发展(上海)有限公司
    2025年09月15日询价
    大鼠总抗氧化能力(TAOC)ELISA试剂盒
    询价