万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件:
-20℃
- 克隆性:
单克隆
- 抗体名:
Neutrophils 抗体 (PE)
- 规格:
0.1ml/0.2ml
Neutrophils
适用
其他选择 小鼠
宿主
其他选择 大鼠
克隆类型 (克隆位点)
单克隆 (07-04-14)
标记
其他选择 PE
应用范围
其他选择 流式细胞分析技术(FACS)
Pubmed 2个引用可参考
规格 0.3 mg
发货至 中国 (更改)
发货时间 29至35个工作日
产品编号 yb114284
产品细节 Neutrophils 抗体 (PE)
免疫原 Cultured bone marrow cells
克隆位点 07-04-14
亚型 IgG2a
产品特性 Absorption / Emission: 488 nm / 575 nm
纯化方法 Protein A affinity purified Ig
目标详细情况 Neutrophils 抗体 (PE)
研究领域 Immunology, Cell/Tissue Markers
使用细节 Neutrophils 抗体 (PE)
应用备注 Flow cytometry (see protocol).
Other applications not tested.
Optimal dilutions are dependent on conditions and should be determined by the user.
实验流程 FLOW CYTOMETRY ANALYSIS: Method: 1. Prepare a cell suspension in media A. For cell preparations, deplete the red blood cellpopulation using an NH4Cl lysing buffer.
限制 仅限研究用
贮存及处理 Neutrophils 抗体 (PE)
浓度 0.1 mg/mL
缓冲液 PBS with 0.09 % NaN3 as preservative and EIA grade BSA as a stabilizing protein to bring total protein concentration to 4-5 mg/mL
储存液 Sodium azide
注意事项 This product contains sodium azide: a POISONOUS AND HAZARDOUS SUBSTANCE which should be handled by trained staff only.
注意事项 Avoid repeated freezing and thawing.
储存条件 -20 °C
储存方法 Prior to reconstitution store at -70 °C. Following reconstitution store the antibody (in aliquots) at -20 °C for 6 month.
有效期 6 months
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验抗体二抗上连接有荧光染料。直接标记染色背景低,实验程序少尽量减少实验工序和过程,以保证实验的真实和准确性。因此在条件允许的范围内,建议尽量用直接标记的抗体进行实验。 3、流式抗体荧光标记的选择: 如果实验中检测单一指标:不同荧光标记在不同的仪器上强度不同。以某仪器为例:PE >APC >PE-Cy5 >PerCP >FITC >PerCP-Cy5.5,通常来说,PE最强,适用于弱表达抗原。FITC强度较弱,适用于强表达抗原,使用范围比较广。用户需根据检测的目标蛋白进行具体选择。 如果同时检测多个
Isolation of Human and Mouse Neutrophils Ex Vivo and In Vitro
; Wartha and Henriques-Normark, Sci Signal 1:pe25, 2008). Neutrophils are, therefore, always a major focus of investigation for scientists all over the world. Isolation of neutrophils from either human beings or animals such as mice is a very common
PriCells: 藻红蛋白标记抗体的方法﹠PE-标记蛋白A方法
藻红蛋白标记抗体的方法:1. 巯基化藻红蛋白(PE)的制备;(1)将600μl浓度为15.5mg/ml的盐酸巯醇亚胺加到1.2ml浓度为3.6mg/ml的PE中;(2)将以上混合液和1.2ml pH6.8的PB混合,而后装入透析袋置入50mmol/L pH6.8的PB中于4℃透析,过夜;(3)再换用pH7.5 PB透析6h。每个PE分子中可结合8个巯基;2. 巯基PE-IgG的制备;(1)将30μl浓度为1.1mg/ml的异双功能试剂SPDP的乙醇溶液,加入到700μl
技术资料暂无技术资料 索取技术资料










