- 询价
- 爱必梦(abm)
- T9097
- 2025年07月15日
企业认证
相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件：
详询
- 库存：
99
- 供应商：
广州市左克生物
- 规格：
1x10⁶ cells / 1.0 ml
| Cat. No. | T9097 |
| Name | Immortalized Rat Retinal Capillary Endothelial Cells - SV40 |
| Description |
Real Time PCR was used to quantify SV40 gene expression in immortalized cell line. These cells are useful in studying the transport mechanism of molecules across the inner blood-retinal barrier (inner BRB). |
| Organism | Rat (R. norvegicus) |
| Tissue | Eye |
| Growth Properties | Adherent, polygonal |
| Cell Type | Immortalized Cells |
| Storage Condition | Vapor phase of liquid nitrogen, or below -130°C. |
| Shipping Conditions | Ship with dry ice. |
| Product Format | Frozen |
| Intended Use | This product is intended for laboratory research use only. It is not intended for any animal or human therapeutic use, any human or animal consumption, or any diagnostic use. |
| BioSafety | II |
| Certificate of Analysis | For batch-specific test results, refer to the applicable certificate of analysis that can be found at www.abmgood.com. |
| Growth Conditions | Use of PriCoat™ T25 Flasks (G299) or Applied Cell Extracellular Matrix (G422) is required for cell adhesion to the culture vessels. PriGrow IV (TM004) + 10% FBS + 1% Penicillin/Streptomycin Solution (G255), 37.0°C, 5% CO₂ |
| Unpacking and Storage Instructions |
1. Visually examine the packaging containers for signs of leakage or breakage. 2. Immediately transfer frozen cells from dry ice packaging to a temperature below -130°C, preferably in liquid nitrogen vapor phase storage, until ready for use. To ensure the highest level of viability, thaw the vial and initiate culture as soon as possible upon receipt. If continued storage is desired, the vial should only be stored below -130°C or in liquid nitrogen vapor phase. Do not store at -70°C, as it will result in loss of viability. |
| Thawing Protocol |
1. Thaw cells quickly in a 37°C water bath while agitating gently (maximum 2 minutes). The vial cap should be kept above the water level to minimize the risk of contamination. 2. Decontaminate the vial by spraying and wiping the exterior of the vial with 70% ethanol. From this point onwards, all operations should be strictly carried out inside a biological safety cabinet using aseptic conditions. 3. Transfer the cell suspension into a 15ml sterile conical tube containing 5ml of pre-warmed, complete growth media. Centrifuge cells at 125xg for 5-7 minutes. 4. Aspirate the supernatant without disturbing the cell pellet. Re-suspend the cell pellet in the recommended pre-warmed, complete growth media and dispense into a T25 culture flask. 5. Incubate the cells at the recommended conditions. |
| Subculture Protocol |
Volumes given below are for a T75 flask; proportionally increase or decrease the volume as required per culture vessel size. Subculture cells once the culture vessel is 80% confluent. 1. Aspirate the culture media, and add 2-3ml of pre-warmed 0.25% Trypsin-EDTA to the culture vessel. 2. Observe the cells under a microscope to confirm detachment (typically within 2-10 minutes). Cells that are difficult to detach can be put in 37°C, for several minutes to facilitate detachment. 3. Neutralize Trypsin-EDTA by adding an equal volume of the complete growth media into the culture vessel. 4. Transfer the culture suspension into a sterile centrifuge tube, and centrifuge at 125xg for 5 minutes. The actual centrifuge duration and speed may vary depending on the cell type. 5. Aspirate the supernatant, and re-suspend the pellet with pre-warmed fresh complete growth media. Add appropriate aliquots of the cell suspension to new culture vessels, as desired. 6. Incubate the cells at the recommended conditions. |
| Cryopreservation | Cryopreservation Medium (TM024), or complete growth media with 10% DMSO. |
| Population Doubling Time (h) | 24 - 28 |
| Immortalization Method | Serial passaging and infection with Lentivirus carrying SV40 antigen gene |
| Material Citation | If use of this material results in a scientific publication, please cite the material in the following manner: Applied Biological Materials Inc, Cat. No. T9097. |
| Warranty | abm warrants that cell lines shall be viable upon initiation of culture for a period of thirty (30) days after shipment and that they shall meet the specifications on the applicable abm Material Product Information sheet, certificate of analysis, and/or catalog description. Such thirty (30) day period is referred to herein as the "Warranty Period”. |
| Disclaimer |
1. All test parameters provided in the CoA are conducted using abm's standardized culture system and The stated values may vary under the end-user's culture conditions. Please verify that the product is suitable for your studies by referencing published papers or ordering RNA (0.5 μg, Cat.# C207, $450.00) or cell lysate (100 μg, Cat.# C206, $600.00) to perform preliminary experiments, or alternatively use our Gene Expression Assay Service (Cat# C138). All sales are final. 2. We recommend live cell shipments for ease of cell transfer and this option can be requested at the time of order placement. Please note that the end-user will need to evaluate the feasibility of live cell shipment by taking into account the final destination's temperature variation and its geographical location. 3. All of abm's cell biology products are for research use ONLY and NOT for therapeutic/diagnostic applications. abm is not liable for any repercussions arising from the use of its cell biology product(s) in therapeutic/diagnostic or any other non-RUO application(s). 4. abm makes no warranties or representations as to the accuracy of the information on this site. Citations from literature are provided for informational purposes only. abm does not warrant that such information has been shown to be accurate. 5. abm warrants that cell lines shall be viable upon initiation of culture for a period of thirty (30) days after shipment and that they shall meet the specifications on the applicable abm Material Product Information sheet, certificate of analysis, and/or catalog description. Such thirty (30) day period is referred to herein as the "Warranty Period".
|
| Application | Research Use Only. |
| Material Citation | If use of this material results in a scientific publication, please cite the material in the following manner: Applied Biological Materials Inc, Cat. No. T9097 |
风险提示：丁香通仅作为第三方平台，为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全，合理判断，谨慎选购商品，商家和用户对交易行为负责。对于医疗器械类产品，请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验液加透热电凝和巩膜缩短，据说可使病变静止。 【病因学】 本病是一种视网膜血管异常，血管内皮细胞屏障作用丧失，以致血浆大量渗出于视网膜神经上皮层下，导致视网膜广泛脱离的视网膜病变。但这种视网膜血管异常是先天性的还是后天性的，是原发性的还是继发性的，到目前为止，尚无定论。 【病理改变】 文献中，有关本病的组织学检查，大多为晚期病例。Trpathi及Ashton（1971）曾对一例早期典型病例的组织标本进行了电子显微镜检查，观察到血管内皮细胞
前 24 小时。剪切应力以达因 / 平方厘米（dyn / cm 2）测量。 生理剪切应力值的范围为 0.5 至 120 达因 / 平方厘米，取决于血管类型（例如，动脉或静脉），组织（例如，脑，结缔组织或心脏），以及生物体的大小（例如，小鼠，大鼠或人）。下表显示了常见组织细胞的剪切力范围：组织类型剪切应力（dyn/cm2）主动脉~1-22动脉~10-70静脉~1-6毛细血管~3-95三、不同类型的流动简要介绍在不同的生物组织中，通常具有几种明确特征的几种流体类型。 基本上，流动类型可以细分为层流和湍流
中述及。 原发性高血压比较常见，多发生于中年（35～40岁）以后，男性与女性的患病率无明显差别。 一、病因和发病机制 原发性高血压的病因和发病机制尚未完全明了，近年来，随着生理学、遗传学、神经内分泌学及分子生物学的发展，以及自发性高血压大鼠模型的建立，许多研究已达到分子水平。目前，各种学说中以Page的镶嵌学说（mosaic theory）比较全面，认为高血压并非由单一因素引起，而是由彼此之间相互影响的多种因素造成。 1．遗传因素 约75％的原发
技术资料暂无技术资料 索取技术资料
