相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 技术资料
- 库存:
59
- 英文名:
Sennoside A
- CAS号:
81-27-6
- 供应商:
上海莼试
- 保存条件:
4°C, protect from light
- 规格:
10mM (in 1mL DMSO) 20mg
本产品仅供科学实验研究使用! 不能用于临床或动物诊断!
化学性质:

Sennoside A规格:10mM (in 1mL DMSO) 20mg
CAS:81-27-6
别名:
化学名:(9R)-9-[(9R)-2-carboxy-4-hydroxy-10-oxo-5-[(2S,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-9H-anthracen-9-yl]-4-hydroxy-10-oxo-5-[(2S,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-9H-anthracene-2-carboxylic acid
分子式:C42H38O20

分子量:862.74
溶解度:≥ 39.9mg/mL in DMSO
储存条件:4°C, protect from light
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition: Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
产品描述:

IC50: N/ASennoside A is a dianthrone glycoside isolated from Rhei Rhizoma and senna leaf. Sennoside A and B have identical molecular weights and formulae. Sennosides were known as laxatives causing purgative actions through the biotransformation of rhein anthrone. Sennoside A was reported to have regionally differential effects on spontaneous contractions of colon.In vitro: The gastroprotective activities of sennoside A was found to be due to the up-regulation of PGE2 and the inhibitions of H+/K+-ATPase activity. When measured the H+/K+-ATPase activities of sennoside A, the positive control exhibited inhibitions of 41.1% and 42.4% at 50 μM and 100 μM, whereas sennoside A showed dose-dependent inhibitions of 17.3% and 27.1% at 50 μM and 100 μM [1].In vivo: In a rat model, sennoside A reduced gastric juice, total acidity and increased pH, indicating that proton pump inhibition reduces gastric acid secretion. Furthermore, sennoside A increased PGE2 in a concentration-dependent manner. Moreover, in the intestinal transporting and gastric emptying rate experiment, sennoside A was found to accelerate such GI motility. These results suggested sennoside A possessed significant gastroprotective activities and it might be useful for the gastric disease treatment [1].Clinical trial: N/A
使用方法:

1. 常用筛选浓度
注意:用来筛选稳转株的工作浓度需要根据细胞类型,培养基,生长条件和细胞代谢率而变化,推荐使用浓度为50-1000μg/mL。对于第一次使用的实验体系建议通过建立杀灭曲线(kill curve),即剂量反应性曲线,来确定最佳筛选浓度。
一般而言,哺乳动物细胞50-500μg/mL;细菌/植物细胞20-200μg/mL;真菌300-1000μg/mL。
2. 杀灭曲线的建立
注意:为了筛选得到稳定表达目的蛋白的细胞株,需要确定能够杀死未转染宿主细胞的抗生素浓度,可通过建立杀灭曲线(剂量反应曲线)来实现,至少选择5个浓度。
1) 第一天:未转化的细胞按照20-25%的细胞密度铺在合适的培养板上,37℃,CO2培养过夜;注:对于需要更高密度来检测活力的细胞,可增加接种量。
2) 根据细胞类型,设定合适范围内的浓度梯度。以哺乳动物细胞为例,可设定50,100,250,500,750,1000μg/mL。先用去离子水或者PBS buffer按照1:10的比例将母液稀释到5 mg/ml,然后按照下表稀释到相应浓度的工作液。
3) 第二天:替换旧的培养基,换用新鲜配制的含有相应浓度药物的培养基。每个浓度做三个平行孔。
4) 接下来每3-4天更换新的含药物培养基。
5) 按照固定的周期(如每2天)进行活细胞计数来确定阻止未转染细胞生长的恰当浓度。选择在理想的天数(通常是7-10天)内能够杀死绝大多数细胞的浓度为稳定转染细胞筛选用的工作浓度。
3. 稳定转染细胞的筛选
1) 转染48h后,用含有适当浓度的潮霉素B筛选培养基来传代细胞(直接传代或者稀释后传代)。
注意:细胞处于活跃分裂状态时抗生素的杀伤。则当细胞过于稠密,其效率会降低。为了得到较好的筛选效果,最好将细胞稀释至丰度不超过25%
2) 每隔3-4天更换含有药物的筛选培养液。
3) 筛选7天后观察并评估细胞克隆(集落)的形成情况。集落的形成可能还需要一周或者更多的时间,这取决于宿主细胞类型,转染,以及筛选效果。
4) 挑取并转移5-10个抗性克隆于35mm细胞培养板,继续用含药物的筛选培养液维持培养7天。
5) 之后更换正常培养基培养即可。
公司正在出售的产品:

蛋白酶抑制剂混合物实验步骤:

(1)实验开始前将RNA提取液于65℃水浴锅中预热,离心管中加入ME(巯基乙醇),(10mL加80ul,50mL中加入300ul)
(2)取约0.8g菌丝体(液体培养获得的菌丝用真空抽滤即可!固体培养就更好说了),在液氮中迅速磨成精细粉末,装入50mL离心管,按1g材料8mL的量加入预热的RNA提取液,颠倒混匀
(3)65℃水浴3-10 min,期间混匀2-3次
(4)加入等体积的酚(注意是酸酚pH4.5)::yi戊醇(25:24:1)抽提(10,000rpm,4℃,5 min)
(5)取上清,等体积的yi戊醇(24:1)抽提(10,000rpm,4℃,5 min)
(6)加入1/4V体积10M LiCl溶液,4℃放置6h以上(或过夜)
(7)10,000rpm,4℃离心20min
(8)弃上清,用500ul SSTE溶解沉淀
(9)酚::yi戊醇(25:24:1)抽提两次,:yi戊醇(24:1)抽提1次(10,000rpm,4℃,5min)
(10)加2V体积的无水乙醇,在-70℃冰箱沉淀30min以上
(11)12,000rpm,4℃离心20 min
(12)弃上清.沉淀用70%酒精漂洗一次,干燥
(13)加200ul的DEPC处理水溶解
(14)用非变性琼脂糖凝胶电泳和紫外分光光度计扫描检测RNA的质量(在抽提过程中,若蛋白质含量或其它的杂质还较多,可以增加抽提次数)
| 产品名称 | Sennoside A | 产品货号 | CS-01Y72783 |
| 规格 | 10mM (in 1mL DMSO) 20mg | CAS号 | 81-27-6 |
| 含量 | >98.00% | 分子式 | C42H38O20 |
| 分子量 | 862.74 | 用途 | 仅供科研研究使用 |

Sennoside A规格:10mM (in 1mL DMSO) 20mg
CAS:81-27-6
别名:
化学名:(9R)-9-[(9R)-2-carboxy-4-hydroxy-10-oxo-5-[(2S,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-9H-anthracen-9-yl]-4-hydroxy-10-oxo-5-[(2S,3R,4S,5S,6R)-3,4,5-trihydroxy-6-(hydroxymethyl)oxan-2-yl]oxy-9H-anthracene-2-carboxylic acid
分子式:C42H38O20

分子量:862.74
溶解度:≥ 39.9mg/mL in DMSO
储存条件:4°C, protect from light
General tips:For obtaining a higher solubility , please warm the tube at 37 ℃ and shake it in the ultrasonic bath for a while.
Shipping Condition: Evaluation sample solution : ship with blue ice All other available size: ship with RT , or blue ice upon request
产品描述:

IC50: N/ASennoside A is a dianthrone glycoside isolated from Rhei Rhizoma and senna leaf. Sennoside A and B have identical molecular weights and formulae. Sennosides were known as laxatives causing purgative actions through the biotransformation of rhein anthrone. Sennoside A was reported to have regionally differential effects on spontaneous contractions of colon.In vitro: The gastroprotective activities of sennoside A was found to be due to the up-regulation of PGE2 and the inhibitions of H+/K+-ATPase activity. When measured the H+/K+-ATPase activities of sennoside A, the positive control exhibited inhibitions of 41.1% and 42.4% at 50 μM and 100 μM, whereas sennoside A showed dose-dependent inhibitions of 17.3% and 27.1% at 50 μM and 100 μM [1].In vivo: In a rat model, sennoside A reduced gastric juice, total acidity and increased pH, indicating that proton pump inhibition reduces gastric acid secretion. Furthermore, sennoside A increased PGE2 in a concentration-dependent manner. Moreover, in the intestinal transporting and gastric emptying rate experiment, sennoside A was found to accelerate such GI motility. These results suggested sennoside A possessed significant gastroprotective activities and it might be useful for the gastric disease treatment [1].Clinical trial: N/A
使用方法:

1. 常用筛选浓度
注意:用来筛选稳转株的工作浓度需要根据细胞类型,培养基,生长条件和细胞代谢率而变化,推荐使用浓度为50-1000μg/mL。对于第一次使用的实验体系建议通过建立杀灭曲线(kill curve),即剂量反应性曲线,来确定最佳筛选浓度。
一般而言,哺乳动物细胞50-500μg/mL;细菌/植物细胞20-200μg/mL;真菌300-1000μg/mL。
2. 杀灭曲线的建立
注意:为了筛选得到稳定表达目的蛋白的细胞株,需要确定能够杀死未转染宿主细胞的抗生素浓度,可通过建立杀灭曲线(剂量反应曲线)来实现,至少选择5个浓度。
1) 第一天:未转化的细胞按照20-25%的细胞密度铺在合适的培养板上,37℃,CO2培养过夜;注:对于需要更高密度来检测活力的细胞,可增加接种量。
2) 根据细胞类型,设定合适范围内的浓度梯度。以哺乳动物细胞为例,可设定50,100,250,500,750,1000μg/mL。先用去离子水或者PBS buffer按照1:10的比例将母液稀释到5 mg/ml,然后按照下表稀释到相应浓度的工作液。
3) 第二天:替换旧的培养基,换用新鲜配制的含有相应浓度药物的培养基。每个浓度做三个平行孔。
4) 接下来每3-4天更换新的含药物培养基。
5) 按照固定的周期(如每2天)进行活细胞计数来确定阻止未转染细胞生长的恰当浓度。选择在理想的天数(通常是7-10天)内能够杀死绝大多数细胞的浓度为稳定转染细胞筛选用的工作浓度。
3. 稳定转染细胞的筛选
1) 转染48h后,用含有适当浓度的潮霉素B筛选培养基来传代细胞(直接传代或者稀释后传代)。
注意:细胞处于活跃分裂状态时抗生素的杀伤。则当细胞过于稠密,其效率会降低。为了得到较好的筛选效果,最好将细胞稀释至丰度不超过25%
2) 每隔3-4天更换含有药物的筛选培养液。
3) 筛选7天后观察并评估细胞克隆(集落)的形成情况。集落的形成可能还需要一周或者更多的时间,这取决于宿主细胞类型,转染,以及筛选效果。
4) 挑取并转移5-10个抗性克隆于35mm细胞培养板,继续用含药物的筛选培养液维持培养7天。
5) 之后更换正常培养基培养即可。
公司正在出售的产品:

| Leflunomide-d4 | KDM5-IN-1 |
| GW841819X | Lipoprotein, a(Lpa)ELISA Kit |
| Tenovin-1 | Pentraxin 3, Long(PTX3)ELISA Kit |
| Acriflavine | Integrin Linked Kinase(ILK)ELISA Kit |
| JAK2-IN-4 | Positive Cofactor 4(PC4)ELISA Kit |
| JAK1-IN-3 | Integrin Associated Protein(IAP)ELISA Kit |
| N6-Methyladenine | Integrin Beta 8(ITGb8)ELISA Kit |
| TCEP-biotin | MHC-Ⅲ/H-2Ⅲ 小鼠主要组织相容性复合Ⅲ类ELISA检测试剂盒 |
| NVS-CECR2-1 | Phospholipase A2, Lipoprotein Associated(LpPLA2)ELISA Kit |
| GSK 5959 | Lipase, Lipoprotein(LIPD)ELISA Kit |
| UF 010 | Flotillin 1(FLOT1)ELISA Kit |
| GSK J4 HCl | Flotillin 2(FLOT2)ELISA Kit |
| UNC3866 | Sennoside ALipase H(LIPH)ELISA Kit |
| Triclabendazole-13C-d3 | Lipase I(LIPI)ELISA Kit |
| Lipase M(LIPM)ELISA Kit | Lipase J(LIPJ)ELISA Kit |
蛋白酶抑制剂混合物实验步骤:

(1)实验开始前将RNA提取液于65℃水浴锅中预热,离心管中加入ME(巯基乙醇),(10mL加80ul,50mL中加入300ul)
(2)取约0.8g菌丝体(液体培养获得的菌丝用真空抽滤即可!固体培养就更好说了),在液氮中迅速磨成精细粉末,装入50mL离心管,按1g材料8mL的量加入预热的RNA提取液,颠倒混匀
(3)65℃水浴3-10 min,期间混匀2-3次
(4)加入等体积的酚(注意是酸酚pH4.5)::yi戊醇(25:24:1)抽提(10,000rpm,4℃,5 min)
(5)取上清,等体积的yi戊醇(24:1)抽提(10,000rpm,4℃,5 min)
(6)加入1/4V体积10M LiCl溶液,4℃放置6h以上(或过夜)
(7)10,000rpm,4℃离心20min
(8)弃上清,用500ul SSTE溶解沉淀
(9)酚::yi戊醇(25:24:1)抽提两次,:yi戊醇(24:1)抽提1次(10,000rpm,4℃,5min)
(10)加2V体积的无水乙醇,在-70℃冰箱沉淀30min以上
(11)12,000rpm,4℃离心20 min
(12)弃上清.沉淀用70%酒精漂洗一次,干燥
(13)加200ul的DEPC处理水溶解
(14)用非变性琼脂糖凝胶电泳和紫外分光光度计扫描检测RNA的质量(在抽提过程中,若蛋白质含量或其它的杂质还较多,可以增加抽提次数)
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
技术资料暂无技术资料 索取技术资料
Sennoside A
¥600 - 3200









