相关产品推荐更多 >
![4-{4-[4-(dimethylamino)benzenecarbothioyl]piperazine-1-carbothioyl}-N,N-dipropylaniline](https://img1.dxycdn.com/p/s14/2025/0827/490/8632273593555160691.jpg!wh200)
4-{4-[4-(dimethylamino)benzenecarbothioyl]piperazine-1-carbothioyl}-N,N-dipropylaniline
询价
Kynurenic Acid (OVA)/Kynurenic Acid (OVA)/Kynurenic Acid (OVA)
询价
Human RPL23 shRNA Plasmid/Human RPL23 shRNA Plasmid/Human RPL23 shRNA Plasmid
询价
Rat DEFB1 shRNA Plasmid/Rat DEFB1 shRNA Plasmid/Rat DEFB1 shRNA Plasmid
询价
Glc尾3GalNAc尾-BP
询价
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件:
-20°C.
- 保质期:
2年
- 英文名:
AZDye 568 TFP Ester-25 mg
- 库存:
100
- 供应商:
艾美捷科技
- CAS号:
查看datasheet
AZDye 568 TFP酯-25 mg,AZDye 568 TFP Ester-25 mg,AZDye 568 TFP酯-25 mg,AZDye 568 TFP Ester-25 mg
AZDye 568 TFP酯-25 mg-AZDye 568 TFP Ester-25 mg
产品货号:CCT-FP-1091-25
产品规格:25mg
AZDye™ 568 TFP酯是一种胺反应性橙子荧光染料,通常用于通过伯胺(Lys)、胺修饰的寡核苷酸和其他含胺生物分子标记蛋白质或抗体。AZDye™ 568染料可用于高摩尔比的蛋白质标记,而不会发生显著的自猝灭,从而实现更明亮的缀合物和更灵敏的检测。

AZDye™ 568 TFP Ester is an amine-reactive, orange fluorescent dye routinely used to label proteins or antibodies through the primary amines (Lys), amine-modified oligonucleotides, and other amine-containing biomolecules. AZDye™ 568 dye can be used for proteins labeling at high molar ratios without significant self-quenching, enabling brighter conjugates and more sensitive detection.AZDye™ 568 is a water-soluble, photostable, and bright orange dye with pH insensitive emission from pH 4 to pH 10. The excitation of AZDye™ 568 dye ideally suited for the 568 nm laser line on the Ar-Kr mixed-gas laser. AF™ 568 dye conjugated to a variety of antibodies, peptides, proteins, tracers, and amplification substrates often used for generation of stable signal in imaging and flow cytometry.2,3,5,6-tetrafluorophenyl (TFP) esters is another type of carboxylic acid derivative that react with primary amines forming covalent amide bond. The amine linkage bond is identical to one formed by the reaction between primary amines and NHS esters or sulfo-NHS esters. However, in most cases, TFP ester displays much better stability toward hydrolysis in aqueous media resulting in more efficiency and better reproducible labeling of biopolymers.

AZDye 568 TFP酯-25 mg-AZDye 568 TFP Ester-25 mg-20°C.
点击:AZDye 568 TFP酯-25 mg-AZDye 568 TFP Ester-25 mg查看更详细产品说明,更多应用、储存、价格、货期等信息请垂询艾美捷科技有限公司。更多Vectorlabs公司Azides(Biotin-Azides)试剂、Bis-sulfone交联试剂、DBCO试剂、TCO试剂、Terminal Alkyne试剂、Tetrazine试剂、标记试剂盒以及分选用底物等。,请点击查看艾美捷特色产品中心。

风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验1. 引物是如何合成的?目前引物合成基本采用固相亚磷酰胺三酯法。 DNA 合成仪有很多种 , 主要都是由 ABI/PE 公司生产,而 Bioneer自行研制 的专利 384并行高通量 DNA合成仪, 可实现 99% 的高合成率。无论采用什么机器合成,合成的原理都相同,主要差别在于合成产率的高低,试剂消耗量的不同和单个循环用时的多少。亚磷酰胺三酯法合成 DNA 片段,具有高效、快速的偶联以及起始反应物比较稳定的特点。亚磷酰胺三酯法是将 DNA 固定在固相载体上完成
包装 1mg或更少的多肽按净重包装,声明的小瓶重不含相关抗离子和水。 例如,氨基酸分析决定的肽含量是80%, 在1mg样品中,那么瓶中毛重是1.25mg。 大量的多肽以毛重算。标出的重量含相关抗离子和水, 例如,25mg样品中肽百分比为90%,那么,实际肽量为25mg×90%=22.5mg 不要把肽含量和纯度搞混了。肽的纯度可能是100%, 而肽含量相关带电基团(如Arg, Lys )的抗离子量和肽新水性决定。这是合成肽的本身特性。 冻干肽的保存 所有产品应
)配制浓度至少为1 ~3mg/ml 如果在抗体储存过程中添加叠氮钠,则必须在硼酸盐缓冲液中充分透析去除叠氮钠。 3.按25~100μg/mg将生物素酯加入抗体,在室温下均匀混合孵化4h。在完成组合反应之前DMSO最终浓度不得低于5 %,否则生物素酯会沉淀。高浓度的生物素酯会导致体上结合多个生物素分子,因此所有抗体都可能被标记。较低的比例将使生物素化保持在最低限度(25μg生物素酯/mg摩尔比最初是抗体10:1)。 4.每250μg添加生物素酯20μl1mol/L氯化铵,室温孵化10min
技术资料暂无技术资料 索取技术资料





