相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 保存条件:
-20°C. Desiccate
- 保质期:
2年
- 英文名:
AZDye 430 Picolyl Azide-1 mg
- 库存:
100
- 供应商:
艾美捷科技
- CAS号:
查看datasheet
AZDye 430吡啶Azide-1 mg,AZDye 430 Picolyl Azide-1 mg,AZDye 430吡啶Azide-1 mg,AZDye 430 Picolyl Azide-1 mg
AZDye 430吡啶Azide-1 mg-AZDye 430 Picolyl Azide-1 mg
产品货号:CCT-1272-1
产品规格:1mg
AZDye™ 430 Picolyl Azide是一种先进的荧光探针,它结合了铜螯合基序,以提高反应位点处Cu(I)的有效浓度,从而提高CuAAC反应的效率,从而实现更快、更生物相容的CuAAC标记。据报道,与常规叠氮化物相比,信号强度增加高达40倍。

AZDye™ 430 Picolyl Azide is an advanced fluorescent probe that incorporates a copper-chelating motif to raise the effective concentration of Cu(I) at the reaction site to boost the efficiency of the CuAAC reaction, resulting in a faster and more biocompatible CuAAC labeling. Up to 40-fold increase of signal intensity, compared to conventional azides, was reported .In addition, the use picolyl azides instead of conventional azides allows for at least a tenfold reduction in the concentration of the copper catalyst without sacrificing the efficiency of labeling, significantly improving biocompatibility of CuAAC labeling protocol.In summary, the introduction of a copper-chelating motif into azide probe leads to a substantial increase in the sensitivity and reduced cell toxicity of CuAAC detection alkyne-tagged biomolecules. This will be of special value for the detection of low abundance targets or living system imaging.AZDye™ 430 is structurally identical to Alexa Fluor® 430. Its absorption/emission spectra is a perfect match to spectra of many other structurally similar dyes, including Alexa Fluor® 430 and CF®430 Dye.For application where the presence of copper is not acceptable, please consider our AZDye™ 430 DBCO probe for copper-less detection of azide-modified molecules.Alexa Fluor® is a registered trademark of Thermo Fisher Scientific. CF® Dye is a registered trademark of Biotium, Inc

AZDye 430吡啶Azide-1 mg-AZDye 430 Picolyl Azide-1 mg-20°C. Desiccate
点击:AZDye 430吡啶Azide-1 mg-AZDye 430 Picolyl Azide-1 mg查看更详细产品说明,更多应用、储存、价格、货期等信息请垂询艾美捷科技有限公司。更多Vectorlabs公司Azides(Biotin-Azides)试剂、Bis-sulfone交联试剂、DBCO试剂、TCO试剂、Terminal Alkyne试剂、Tetrazine试剂、标记试剂盒以及分选用底物等。,请点击查看艾美捷特色产品中心。

风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验用5XDMF和2XDCM洗涤后,将树脂放置于泡沫板上的薄纸上,于室温下干燥过夜。将另一张薄纸覆盖在树脂上,轻轻挤压,以破碎聚集物。8)对树脂进行称重,并装入合适的容器内备用。4.检查含有Fmoc氨基酸树脂的替代率1)用微量离心管称量双份5~10mg含Fmoc氨基酸树脂样品,加1.00ml20%六氢吡啶/DMF,振荡20min后,离心使树脂沉降。2)将100ul上清液转移至装有10mlDMF的试管中,混合均匀。3)用移液管分别转移2mlDMF到参比杯和样品杯中,将分光光度计调零,利用参比杯调空白后,向样品
分细胞破碎。可用于提取蛋白质和核酸。 2.化学和生物化学法 (1)自溶法:把新鲜材料置于一定的pH和适宜的温度下,利用组织细胞自身的酶系统把组织破坏,使细胞内容物释放出来。动物材料的自溶温度选在0~4℃,需加少量防腐剂,自溶时间较长,不易控制,不常用。 (2)溶菌酶处理法:多用于破坏大肠杆菌等微生物的细胞壁。在每毫升含2亿个细胞的悬液中加100μg至1mg溶菌酶,37℃,保温10min,细胞就破坏了。此外,蜗牛酶、纤维素酶也被选作破碎细菌细胞之用。
分细胞破碎。可用于提取蛋白质和核酸。 2.化学和生物化学法 (1)自溶法:把新鲜材料置于一定的pH和适宜的温度下,利用组织细胞自身的酶系统把组织破坏,使细胞内容物释放出来。动物材料的自溶温度选在0~4℃,需加少量防腐剂,自溶时间较长,不易控制,不常用。 (2)溶菌酶处理法:多用于破坏大肠杆菌等微生物的细胞壁。在每毫升含2亿个细胞的悬液中加100μg至1mg溶菌酶,37℃,保温10min,细胞就破坏了。此外,蜗牛酶、纤维素酶也被选作破碎细菌细胞之用。
技术资料暂无技术资料 索取技术资料







