相关产品推荐更多 >
万千商家帮你免费找货
0 人在求购买到急需产品
- 详细信息
- 文献和实验
- 技术资料
- 库存:
现货
- 保修期:
收货日起三个月内
- 现货状态:
现货
- 供应商:
麦格生物
- 规格:
一支
品质保证,现货供应,可全国发货,质量保证,售后无忧
| 产品品牌: | Millipore |
| 产品名称: | 超滤管15ml 10KD |
| 产品货号: | Merck-UFC9010 |
| 产品规格: | 1支 |
| 保存温度: | 常温 |
Millipore 超滤管15ml 10KD说明:
Amicon ® Ultra 15 mL centrifuge and Ultracel ® The 10000 Dalton molecular weight cutoff filter provides fast ultrafiltration and reliable macromolecule retention. For example, the retention rate of cytochrome C (12.4 kDa) at an initial concentration of 0.25 mg/ml is>95%.
The vertical design and effective membrane surface area provide fast sample processing, high sample recovery (typically greater than 90% of the dilute starting solution), and a processing capacity of 80 times the concentration. The vertical design minimizes solute polarization and subsequent membrane fouling, and the physical permanent stop point in the filtration device prevents spinning drying and potential sample loss.
Use a pipette to collect the concentrated solution from the sample library of the filtration device, while collecting the ultrafiltration solution in the provided centrifuge tube. This device can rotate in a swinging bucket or in a fixed angle rotor. Amicon ® The Ultra 15 mL filter features a vertical membrane design and permanent stop point, providing the highest recovery rate in a short rotation time.
风险提示:丁香通仅作为第三方平台,为商家信息发布提供平台空间。用户咨询产品时请注意保护个人信息及财产安全,合理判断,谨慎选购商品,商家和用户对交易行为负责。对于医疗器械类产品,请先查证核实企业经营资质和医疗器械产品注册证情况。
文献和实验millipore超滤离心管想重复使用,请问如何清洗和保存? 最近使用超滤管,由于管子较贵,想重复用几次,但找不到可靠的资料。不知如何清洗和保存,比如有人说用叠氮化钠,有人说用氢氧化钠,有人说用乙醇浸泡。莫衷一是。很急用。 【回答精要】 使用后用0.1M NaOH泡24h,然后20%乙醇浸泡保存。 这个我是听老板们说的,的确乙醇泡完后孔径会增大,基本就是5-10KD最大,也就是说如果你的蛋白在21KD以上,应该没问题。或者可以不用乙醇泡,用NaOH洗之后
,如果希望100%截留某个蛋白,一般膜孔径选择为目标蛋白的1/3-1/5。 (八)问题:用10KD,15ml的超滤管超滤含20KD目的蛋白的蛋白溶液,会不会有目的蛋白穿过滤膜呢,我同学用这个超滤管超滤17KD的蛋白液,竟然有目的蛋白透过滤膜 可能会有一定的透过损失,因为截留和分子的形状也有关系。 为了100%截留, 超滤膜的截留分子量最好是目的蛋白的1/3比较保险 (九)问题:我们公司需要的是通过超滤管的那部分液体,将我们的产品分离,我说的超滤液就是指离心
【求助】millipore超滤离心管想重复使用,请问如何清洗和保存? 最近使用超滤管,由于管子较贵,想重复用几次,但找不到可靠的资料。不知如何清洗和保存,比如有人说用叠氮化钠,有人说用氢氧化钠,有人说用乙醇浸泡。莫衷一是。很急用。 【回答精要】 使用后用0.1M NaOH泡24h,然后20%乙醇浸泡保存。 这个我是听老板们说的,的确乙醇泡完后孔径会增大,基本就是5-10KD最大,也就是说如果你的蛋白在21KD以上,应该没问题。或者可以不用乙醇泡,用NaOH洗之后
技术资料暂无技术资料 索取技术资料










