LinKine™ AbFluor™ 488偶联试剂盒（尤其适

LinKine™ AbFluor™ 488偶联试剂盒（KTL0521）

产品概述

本产品为蛋白偶联核心试剂盒，专为分子量6-20 KD样本的荧光标记优化设计，适用于抗体、蛋白质及小分子量生物样本的高效偶联，隶属于样品制备及检测产品中心。

产品详情

• 货号: KTL0521
• 偶联物: AbFluor™ 488（绿色荧光，激发波长488 nm）
• 组分:
  • 活化的AbFluor™ 488偶联物溶液（预活化，直接使用）
  • AbFluor™ 488偶联缓冲液（专利配方，优化荧光效率）
  • 纯化柱（0.5 mL，3KD截留分子量）

核心优势

• 高兼容性: 适配FITC/Alexa Fluor 488检测通道，背景信号更低。
• 高效回收: 纯化柱可去除＞95%未反应染料，蛋白回收率≥85%。
• 标准化流程: 优化标记比例与反应条件，确保批次一致性。

规格与订购

关键操作参数

• 样本要求: 浓度≥2 mg/mL，缓冲液不含氨基组分（如Tris、甘氨酸）。
• 保存条件: -20℃避光保存，有效期6个月。
• 运输方式: 蓝冰冰袋运输，确保低温稳定性。

技术背景

AbFluor™ 488采用水溶性荧光核心结构，通过化学修饰提升标记效率，其量子产率比传统FITC高1.3倍，且光稳定性优异，适用于流式细胞术、免疫荧光及活体成像。

警告声明

仅限研究用途，不适用于人类或临床诊断。使用前需确认符合当地法规及专利许可要求。

注意：以上信息可能随着产品优化升级等因素产生变动，具体信息请咨询亚科因公司。

LinKine™ AbFluor™ 488 Conjugation Kit (KTL0521)

Product Overview

This product is a core protein conjugation kit, specifically optimized for fluorescent labeling of samples with molecular weights ranging from 6-20 KD. It is suitable for efficient conjugation of antibodies, proteins, and low-molecular-weight biological samples, and belongs to the Sample Preparation & Detection Product Center.

Product Details

• Catalog No.: KTL0521
• Conjugate: AbFluor™ 488 (green fluorescence, excitation wavelength 488 nm)
• Components:
  • Activated AbFluor™ 488 conjugate solution (pre-activated, ready-to-use)
  • AbFluor™ 488 conjugation buffer (patented formulation, optimized for fluorescence efficiency)
  • Purification column (0.5 mL, 3 KD molecular weight cutoff)

Core Advantages

• High Compatibility: Compatible with FITC/Alexa Fluor 488 detection channels, with lower background signals.
• High Recovery: The purification column removes >95% of unreacted dye, with protein recovery rates ≥85%.
• Standardized Protocol: Optimized labeling ratios and reaction conditions ensure batch-to-batch consistency.

Specifications & Ordering

Key Operational Parameters

• Sample Requirements: Concentration ≥2 mg/mL, buffer must not contain amino groups (e.g., Tris, glycine).
• Storage Conditions: Store at -20°C protected from light; valid for 6 months.
• Shipping Method: Shipped with blue ice packs to ensure low-temperature stability.

Technical Background

AbFluor™ 488 employs a water-soluble fluorescent core structure, with chemical modifications to enhance labeling efficiency. Its quantum yield is 1.3 times higher than traditional FITC, and it exhibits excellent photostability, making it suitable for flow cytometry, immunofluorescence, and in vivo imaging.

Warning Statement

For research use only. Not intended for human or clinical diagnostic use. Ensure compliance with local regulations and patent licensing requirements before use.

Note: The above information may be subject to changes due to product optimization and upgrades. For specific details, please consult AcroBiosystems.